- 47
- 116 257
Tomas Simatovic
Приєднався 9 лют 2015
Tomas Simatovic
Team Horizon Hobby
Team Horizon Hobby
32" Laser 6mm Depron Prototype
6mm Laser 33" Prototype. Since this flight, I shortened the wingspan from 33 to 32 inches and moved the wing back 3/4" inch which helped with cg, and made the pitch axis much more predictable. The current variant is the 32" 6mm laser.
2204-32 1900kv Cobra motor APC 9x4.1SF3D Prop
2s 450mah lipo
12A esc
KST X08 Plus servos
RCDepron.com is officially distributing high quality depron to the USA! #DepronIsBack
2204-32 1900kv Cobra motor APC 9x4.1SF3D Prop
2s 450mah lipo
12A esc
KST X08 Plus servos
RCDepron.com is officially distributing high quality depron to the USA! #DepronIsBack
Переглядів: 557
Відео
UMX Conscendo! | Do You Ever Fly it Slow?!
Переглядів 1,3 тис.2 місяці тому
After seeing all the comments on my videos at Joe Nall, I feel I need to clarify... YES. It does. But why, when it can fly FAST? Also, because I know some people are going to ask about 4s, I have seen some people fly them on 4s WITHOUT smoking the electronics, but make sure you slap an "experimental" sticker on that bad boy; Horizon does not recommend it. Also, I didn't like the little speed ga...
Antonio De Souza | Wings Over America 2024
Переглядів 2,8 тис.2 місяці тому
I was only able to get about 4 minutes of this insanely clean flight before my storage space ran out! Great flight, man!
Extreme Flight 104 Laser | Tomas Simatovic
Переглядів 16 тис.2 місяці тому
Thanks for watching! This was head cam footage from fall in 2023, so it's a year old from today. Equipment: GP123 Stock Mufflers Falcon 28x9.5 carbon AR11440T Power-Safe RX Spektrum A6300 HV Brushless servos all around Spektrum 2s 2400mah Smart Packs (x2) Tech Aero IBEC engine kill Spektrum NX20 Transmitter
Carbon Z T-28 | Tomas Simatovic
Переглядів 2862 місяці тому
Hey guys! This is a plane I never thought twice about. However, the best way to get me to buy one is to let me fly it... and thanks to my buddy Chris, I had to take it off his hands. This plane is completely stock with the stock model imported on my IX20se! Flying with the 100c 6s 5000mah Spektrum Smart Packs! This plane feels heavy when you pick it up, but feels like it's full of helium in the...
2024 CCRC Fixed Wing Demos | Tomas Simatovic & Oliver Palmer!
Переглядів 1,2 тис.6 місяців тому
Oliver Palmer and I showing off some ExtremeFlight/LegacyAviation Goodness at Cobb County Radio Control club! This is my home field. It might be a little tight, but I know this field best! I am flying an EF 104"wingspan Laser, and Oliver takes his 140" wingspan Turbo Bush Master out half way through the video! Thanks to the gentleman at the field who had his camcorder to capture this and to Oli...
Tomas Simatovic | Spektrum Avian 200A ESC!!! Airplane Guy in a Heli World!
Переглядів 4828 місяців тому
Hey guys! Getting back into 3D Heli's! Decided to keep with the orange theme and upgrade to the new Spektrum Avian 200 ESC on my Goblin RAW 700! Might have something new to put this ESC in soon! This is the 5th flight on these battery packs, and they just keep getting better. The iKon 2 is set a little soft since I'm getting back into it, but as I get more comfortable, I may need to spice it up...
Foamy Prototype Testing
Переглядів 29610 місяців тому
Here is a prototype of my 32" Laser! 6mm Depron, 2s 450, 2204 1960kv motor, and HV servos... A combo I never thought I would use. Its different, but VERY aggressive. Note, in this video, the wing was separating from the fuselage, there is no tail bracing, and it is covered in hot glue. Despite all that, it flies DANG good. I made a few changes since and I believe I have a final design in the wo...
Big RC Plane, Tiny Field! | Tomas Simatovic flies the 104 Extreme Flight Laser!
Переглядів 440Рік тому
When the plane and equipment setup hits just right! This is flight 17 on this bird, and it just keeps getting better and better. The limiting factor is the pilot; the plane can do just about anything!!! Running the following equipment: GP 123 engine with stock mufflers 28x9.5 Falcon Propeller Spektrum AR14400T PowerSafe Receiver Spektrum A6300 Brushless Servos Spektrum 2s 2400mah (x2) batteries...
RC Trailer First Field Day! | Custom 6x12 V-Nose Trailer for RC Aircraft!!!
Переглядів 300Рік тому
Finally got to take the trailer out to the field for the first time! Couple of loose ends still, but finally functional! Any questions, let me know in the comments! Interior Lights: www.amazon.com/dp/B096P3JQBL?psc=1&ref=ppx_yo2ov_dt_b_product_details Exterior Lights/Flood Lights: www.amazon.com/dp/B01KRV3PNA?psc=1&ref=ppx_yo2ov_dt_b_product_details Quick Disconnects: www.amazon.com/dp/B07MMMH6...
Tomas Simatovic | "What Engine is THAT?!" Extreme Flight 85" Slick Joe Nall 2023
Переглядів 28 тис.Рік тому
This plane is WILD!!!! Way more capable than I am. This is the ExtremeFlight 85" Slick, flown at Joe Nall 2023! The DLE 65 turned heads! So many people came and asked me what special motor I was running. While I wanted to pretend it was custom, this engine is completely stock WITHOUT the Bowman ring upgrade! Running a 24x9 falcon prop, Spektrum Powersafe Receiver, dual Spektrum smart 2200mah 2s...
UMX Turbo Timber Evolution|Taking the Abuse!!!!!!
Переглядів 7 тис.Рік тому
I have been DYING to fly this thing since it came out. @horizonhobby NAILED this aircraft! This was a solid 7min hard flight on a 3s 300mah battery from @SpektrumRCvideos . The aircraft is completely stock in this video. This is by far my favorite UMX aircraft to date!
TAS Foamies 27" Yak 55m|Antonio de Souza!
Переглядів 321Рік тому
I love seeing what my planes do in other pilots hands! apc 7x4sf prop park 250 turnigy 10a esc eflite 280mah 2s lipo eflite Ds35 servos Spektrum umx stamp receiver
Wipeout... traxxas stampede bl conversion!
Переглядів 424 роки тому
Wipeout... traxxas stampede bl conversion!
We almost hit a DEER FPV! FPV E-flite Valiant Go Pro Hero 7 Black!
Переглядів 1294 роки тому
We almost hit a DEER FPV! FPV E-flite Valiant Go Pro Hero 7 Black!
Playing with the trees! Go Pro Hero 7 E-flite Valiant FPV!
Переглядів 674 роки тому
Playing with the trees! Go Pro Hero 7 E-flite Valiant FPV!
Ford escape 2010 speedometer motor repair!
Переглядів 5294 роки тому
Ford escape 2010 speedometer motor repair!
Tomas Simatovic TAS 36" Depron Aero Extra 300!
Переглядів 4047 років тому
Tomas Simatovic TAS 36" Depron Aero Extra 300!
Daniel Holman flies the 48" ExtremeFlight Laser EXP at Wenatchee!
Переглядів 7797 років тому
Daniel Holman flies the 48" ExtremeFlight Laser EXP at Wenatchee!
Tomas Simatovic at the AMA Expo 2017!
Переглядів 2,2 тис.8 років тому
Tomas Simatovic at the AMA Expo 2017!
Tomas Simatovic flies the 104 extremeflight extra!
Переглядів 2498 років тому
Tomas Simatovic flies the 104 extremeflight extra!
Twisted hobbys MXS-C over the Bitterroot river!
Переглядів 858 років тому
Twisted hobbys MXS-C over the Bitterroot river!
Tomas Simatovic Flying the TAS Extra 300 V4
Переглядів 1,1 тис.8 років тому
Tomas Simatovic Flying the TAS Extra 300 V4
I imagine it won't hold up well to the average wind.
@@jota5007 you would be amazed. I’ve flown this thing in 15mph winds. The only umx plane I will fly in that kind of wind. As3x busts right through the wind. Now, your own ability to land it in a small patch of grass would be the limiting factor.
Bom dia. Poderia me enviar a plans
I am only selling kits, Check out TAS Aero Design Facebook! Once you have one, you can trace and make more.
what’s is easier to learn 3d maneuvers on as a intermediate. a flat plane like this or a plane like a 300/330 SC what are the pros or reasons to get a plane like yours very interested
This is a Flat Depron foam Laser, but I make a Yak and soon to have an Extra design as well. If you are referring to a wood 3d plane, these are much cheaper, easier to fix, and the fly VERY light. If you are worried about crashing, I recommend a twisted hobbys foamy! They are a little more flimsy, and dont fly as crisp but they are VERY forgiving, and fly great for learning! Also, I recomend a flight simulator for 3d! Big money saver!
Lol, nice flying. Dang I suck..lol
I doubt you suck! This plane handed me my rear end. Im so behind it, I really just wanted to see what it could do!!! Youre too kind, but I disliked your comment because you insulted one of my followers (you) lol.
Sweet flying buddy! That 85" Slick is such an awesome bird!
haha hey man! That's kind, but your video on ken's is even better. Now that I know a 76 will fit in the cowl.....
Is this umx turbo timber evolution still alive 1 year later, ? Cheers that's stick banging if I ever heard it😅
You know, of all the saddest destructions of my airplanes, this one made me mad... My Carbon Z Cessna crushed this airplane when the garage door knocked them off the top shelf... I was so mad!!!! But honestly, if that didn't happen, I'm sure I would have crashed it a week later HHAHA!
These have just hot so terribly expensive over the years. Kinda ruined the hobby for me
Thank you for your comment...
wahnsinn...
extreme horrible engine sound..bah
Thank you for your input. Let's see who else agrees.
So smooth!
Both Crescendos have no right to fly as well as they do for the price.
So true. It should be illegal haha
I'm a rookie but I had to have a UMX Consendo after I saw one fly. Like you say, with a 2s it's a gentle flier and with a 3s it's aggressive! I wouldn't want to try to keep up to it with a camera. I put her down pretty fast when I saw a Red Hawk eyeing it! A guy showed what happened to his plane after a Hawk attacked it and it was ripped in half! Great video, thanks Subscribed
So glad you like it! I've been super busy with work recently, and all I want to do is charge a few and go drive up a mountain somewhere and fly off the cliff side. Such a fun airplane!
Awesome job. The hands of a skilled pilot.👍👍😎😎
🤠👍🏻. nice tune also.
My favorite pilot by far and away.
love flying but have no desire to fly at the same time as anyone else all my planes are scratch or kit built and cannot be replaced like a cheap ass china arf so not taking any chances nice job man that is some talent
best part is, you don't have to! haha. I'm not too kind to my scratch builts either tbh. thanks!
Nice flying and plane, thanks for sharing!
Well, that ten minutes went by pretty fast. :)
That is a very nice helicopter 😂
🤠👍🏼 mad skills bruh
I want this plane so badly. Fixing to build the 85” with a gp61
I might could make you a deal on this bad boy! Shoot me a pm!
Amazing flying a beautiful field!
Nice flying. Love the knife edge. Looks like the plane is on crack.😎👍
This must be a GP61 by the size of the model aircraft
DLE 65. And still slightly tailheavy.... dle65 was perfect power for it, just wish I could keep the muffler on it.
She is a fairy 🧚✨❤️
wow - great flying! i'm inspired! -mikey
Nice video!!!but poor plane!!!😅
🤠👍🏻
Amazing 👏, can you show us how to build it.
Bravo dude👋👋👋👋👍😎👍
Fantastic piloting skills! Very impressive! Congratulations!
This is hands down the best video on the capabilities of the TTEvo. Round of applause!
Thank you so much! I'm kicking myself for leaving the zoom out as far as it was, it would have been much better 1x. Thanks for the kind words!
Very Nice!
Wow😊
When was this? i am one of the younger members at ccrc and need some more experience with 3d. Thanks!
Hey! It was late June. I would love to help! Shoot me an email! Tomassimatovic @ Gmail. com!
If you want real power! you go Electric And that comes with many many benefits that IC cannot deliver.. .
I agree, up to 76". I'm interested to see how the new tmotor combo will do on the 85" once its released, but as of yet, I hate the feel of big electric airplanes. Not to mention, the sound, the smell, and the memories of gas!
Goodluck with getting a 20min flight, another electric guru! Nothing beter than ic aircraft
That’s some elegant flying, it looks like a dragonfly. Greetings from the FPV quadcopter world. I might have to buy one of these things and put a camera on it.
Good job
Awesome, what motor you using?
I knew I forgot something in the specs! Ego Drift 4525 550kv.
Have you checked the rpm on ground?
I never did, I regret not checking it while I had this plane!
@@tomassimatovic ?
@@IspettoriCQ I don't have the plane anymore. I did not check the rpm while I had it.
I have seen some good pilots ! but dam you are freaking good ! I'm waiting for mine this week! really happy to get this little beauty !✈👍
Plans?
Ola disponibilizar a planta
Make a build video on this plane
Really nice job! It was fun watching that flight. Beautiful plane!
Looking great man!
Hey Elijah!!!! You're all grown up!! Been a while! Taking after your brothers I see!!! Well done, Hope to see you at an event again some time!
@@tomassimatovic Yeah! Its great to have great brothers to help me along. It was fun to see you at Joe Nall! I don't know if I'll make it out there again this year or not, but I'd really like to.
one thing I noticed about the slick. It does everything fast to keep it flying. Not like a laser do all this stuff slower. Slick must have a high wing load. The slick needs Laser wings. Thinker and wider wings. Look how slow the Edge is flying. Don't see a Slick flying that slow.
I haven't noticed that at all. Both the 85" slick and laser fly the same weight with same motor, same wing area. The slick has a little different cg actually favoring slow flight. They're all built of the same materials. I loved flying my slick fast because it flies XA so well. The slick had awesome tumbles also. Even with the biggest single cylinder engine recommended it still flew super floaty.
Hate to see a big field!
Nice Bro. I love the Echo through the trees!...
Thank you for this Tom. I see it’s been a few years since you’ve posted this. I was searching for a vid to see how the needles are attached to the motors. I need to get to the circuit board to repair a solder joint in the HS CAN network. So I see they press on the pin.. Thank you much.