- 30
- 59 054
Torrey Vigesaa
Приєднався 20 лип 2011
LandCruiser FJ60 2F water pump replacement
Replacing a water pump on an old 1983 Toyota LandCruiser FJ60.
This LandCruiser has the 2F engine. I compare water pumps on Toyota 1F 1.5F 2F and 3F engines.
This LandCruiser has the 2F engine. I compare water pumps on Toyota 1F 1.5F 2F and 3F engines.
Переглядів: 218
Відео
Toyota on a Moab Utah Trail, +New Exhaust
Переглядів 121Рік тому
After a long trip through Utah and Colorado, my 1990 Toyota Pickup required a new exhaust. I finally replace it with a new muffler and tail pipe. The 1983 Land Cruiser could use some exhaust work as well. The trail scenes take place south west of Moab Utah.
Land Cruiser FJ60 ARB Bumper Install
Переглядів 2,1 тис.Рік тому
First removing the original but modified 1983 FJ60 chrome bumper with winch. Next installing the typical Land Cruiser ARB bumper with 12000LB winch.
Metal Shop Bench Build
Переглядів 164Рік тому
Welding together a quick shop bench. Integreated shelves, bench vice. Used mild steal square tube, mostly 1/8th 1"x1" and 1"x2".
50 year old Jeepster
Переглядів 542 роки тому
After 50 years the 1971 Jeepster Commado is still plowing snow. Although the engine needs some work.
Toyota Pickup 3VZE Water Pump and Timing Belt Idler
Переглядів 3,5 тис.3 роки тому
The water pump went out on my 1990 Toyota Pickup 3VZE V6 engine. I replaced the pump, timing belt tensioner and idler No2 with a cheep kit that took a few modifications to make fit. I also checked on the valve lash which I adjusted 2 years earlier. I adjusted the lash by grinding down the shims, which two years later are still ok, not worn down and having the correct lash. Also a bit of off-roa...
1964 Chevrolet C10 Plus Tree
Переглядів 583 роки тому
Abandon 1964 C10 in the Indie Off-Road playground gets fell tree removed. Drive through the woods in a 1983 Land Cruiser FJ60.
Snowmobiling MN, 2021
Переглядів 1833 роки тому
Out on the trails and lakes, January 2021. 1980's Yamahas and 1990's Skidoos.
Snowmobile Lakes Country
Переглядів 685 років тому
MN Lakes country snowmobiling 2014 - 2019. 1987 Yamaha exciter, 1988 exciter, 1989 exciter, 1987 phazer, 1996 skidoo, 1998 skidoo
Old Land Cruisers Off Road Appleton, 2018
Переглядів 5986 років тому
1996 FJ80 Land Cruiser - Logan, 1983 Fj60 Land Cruiser - Torrey and 1993 4Runner - Al. Off road park near Appleton, MN.
1971 Jeep Commando Snowplow
Переглядів 1,8 тис.6 років тому
1971 Kaiser Jeepster (Jeep) Commando still plowing snow in 2018.
Corkscrew Pass - Ouray
Переглядів 2086 років тому
An overland adventure over Corkscrew pass near Ouray Colorado, part of the Alpine Loop. Vehicles: 1983 Land Cruiser FJ60, 1990 Toyota Pickup, 2017 Jeep Rubicon. Drivers: Torrey, Logan, John. Music: Lonely Ambient - Delaytape Wayfaring Stranger - Return to Normal Not Me - Jeffery Philip Nelson
Taos New Mexico 2015
Переглядів 1627 років тому
Time spent in Taos New Mexico between 2002 and 2015. 2015 Taos was the final destination of my 24 days across the mountains of Colorado driving my 1983 Land Cruiser FJ60.
The Back Road to Aspen - Day 3
Переглядів 1157 років тому
Day 3 of a 3 day journey across mountain roads to Aspen Colorado. Driving an FJ60 Land Cruiser and Toyota 4 Runner. June 2015
Felling trees with drones, bow and arrow, string and 24ft pole saw
Переглядів 6097 років тому
Felling trees with drones, bow and arrow, string and 24ft pole saw
Toyota Pickup 1990 3VZE Engine Valves
Переглядів 18 тис.8 років тому
Toyota Pickup 1990 3VZE Engine Valves
Ouray Colorado 2015, 1983 Land Cruiser
Переглядів 15 тис.8 років тому
Ouray Colorado 2015, 1983 Land Cruiser
Venture 15 Catamaran September 2013
Переглядів 3 тис.11 років тому
Venture 15 Catamaran September 2013
WebIO Internet Automation Smartphone Demo
Переглядів 81013 років тому
WebIO Internet Automation Smartphone Demo
Thanks
can you start the engine from under the hood without having to go to inside the car and turn the ignition key? touching wires from the starter?. I am trying to see if there is spark from my plug wire. My truck is not running after my valve job
I saw you had the silicon/rubber and metal gasket for your waterpump. Did you put RTV on that as well? I am replacing mine along with the #2 idler as well for my 1992 toyota 4runner and the Hanes manual says either use the provided gasket or use RTV not both? What are your thoughts?
Can you please explain more about testing of the fuel rail? Are you testing to see if the fuel rail is free flowing pushing fuel out to the small diaphragm hose and catching the fuel into the water bottle? Can you also check to see if all the injectors spraying fuel freely into the air using this test as well? Thank you
Beautiful sled! Looks like she rips too
I just had to redo my Auto Zone water pump after 7 months so I bought the Toyota one for $270. I have a 93 4 runner with the 3.0 5 speed. Just did everything behind the timing cover including new harmonic dampner, cam seals, front main seal idler and tensioner pulleys new thermostat everything is only 7 months old. I won't put cheap parts on it anymore. Doesn't make sence to cheapen the most reliable rig in history almost and take away it's reliability. But they will work in a pinch. They wanted $350 for the tensioner and idler at Toyota.
Cool!
jgb .....
In Australia at the moment the chrome bumpers are IN! ARB bar is more practical but the factory look is where its at now with 60's here
I am starting to agree, I miss the classic look. I could always switch back, but it works for now. I did have a tree rip off my driver side mirror, but no fault of the bumper.
Thanks for the video. I’m a huge fan of the extended stock bumper. Did you sell it???
I still have the chrome bumper, I wouldn’t toss it away, the chrome is still good. I am finding the ARB not working to stand on when working on the engine.
Loved the video, thank so much
lol fliped her
Aloha yes a lot of us here in Hawaii have Toyota trucks … to gather food and have fun on the sand..🤙🏽
Good to hear. Sounds fun.
Guy in the 4runner - remember when doing any water crossing, that your air intake is right below the left head light,
I'll forward that on to Al "Gillian" (Gillian's Island), he has a way of always sinking the ship.
@@keyeleven @Ryan Nance The the nice thing about Al is his good attitude and willingness to go first. Than you can observe and know what not to do!
I still run the 3.0 in an 1988 pickup. The truck has 400,000 and the motor was replaced 66,000 miles ago. Nice video! It got me excited about taking the Toy out and about.
Good to hear. I only have 227,000 now on mine.
Like Toyota pickup
Nice video! Those Meyer plows look so simple and sturdy! That looks like some HEAVY snow! 1:33 That big mound is a PITA to move, especially after driving over. I "bomb" my first pass all the way to the end.
Looks more like a 68 or 69 Commando. Sorry that you all worked hard to beat what was left of the life out of it. That was a classic Jeep.
Done subscribe
Mantap
I have a 75 venture 15 toughtall 3 sons how to sail. A great entry sailboat. Been a while since we ve taken it out. We replaced the original tramp with a trampoline top made a great improvement. Water unable topool up and slow you down.
Hey I just got a 15 venture it didn’t come with main sail would you know the size of it. Any info on set up would be greatly appreciated can’t find any manuals
@@bryanpayton1281 I m suprised you were able to make any sense out of my message....i voice to text and didnt proof! I can dig out the dail and give you some good measures...how about the jib?
Bryan I ll have to wait til the grass os dry....unfurl onto wet grass makes a mess on sails... Could call a sail maker they have the dementions for the diffrent makes and models. I "d be willing to wager you could get one made for under $450.
This is very helpful I'm currently replacing all the valves and valve seals on my 91 toyota 4runner and this makes it seem way easier than it will be
I have the heads off just waiting for the valves and seals to come in👍
Nice to see these jeeps still in use.
Exactly.. Its fun and I'm still using it (2020)
what is the brand of the bow ? Thank you!
Solid rescue!
You can buy old used meyers set-ups real cheap nowadays and this way you can run a hydraulic pump for up/down, left/right. Makes life soo much easier.
I cannot get my passenger valve cover off. all the bolts are out and i can get it to lift up but its stuck on the side closest to the timing cover. what am I doing wrong?
If I remember right, the valve cover lifts up and back. The front of the cover maybe tucked under the metal back plate behind the cam sprocket which the timing belt cover bolts to. You can loosen the back plate by removing plate bolts. You may have to turn the cam sprocket to access bolts behind the sprocket. Seems odd if you have to do this though. There is also 1 oldly placed valve cover bolt in the back.
@@keyeleven thanks, I loosened a few bolts to the back plate and it finally came out. It was really odd, it was pretty firmly wedged under the back plate of the timing cover.
The view!!! Got a 85 fj myself awesome ride.
I enjoyed watching this video thank you
super helpful seeing the engine pulled as well as the rest of the repairs. it's really hard to understand sometimes when people film inside the engine compartment.
🎥👍👍
Very nice video! Helpful as I am doing the same thing now. Heads off and valves out. Thanks for this..!
Awesome!
Nice to see an old jeep working
Which one has more power and better offroading? The landcruiser or jeepster?
That's some incredible footage and beautiful scenery. I just seen and old red Land Cruiser FJ60 for sale for $3000 I wish I had it cause I would definitely buy it.
Sweet vid. Awesome trails and tote roads! From Maine here, we have alot ofogging roads like that but nothing with those veiws!
You went hard man!
Nice seeing it in action.I have a 1967
Why was it necessary to pull the whole engine out to fix an exhaust valve? Couldn’t you have just pulled the head to do he exact same thing?
Yes, I could have just pulled the head. I also had a bad oil leak, but that turned out to be the oil cooler which was an easy fix (new gaskets) and could have been done with engine in place as well.
Is this up by Walker, or St Croix?
samuel vanderpoel .. South of Walker about a half hour
Sounds like something is coming loose That would drive me nuts!!!, Ben to Ouray Co quite a few times plan on doing the FJ sumit this year other than that great video on your cruiser??? and the country. I have a FJ45 1981 Pickup!
Yes, annoying key chain rattling on the metal dash. I didn't hear it at the time but drives me nuts in the video as well. FJ45 with the rope hooks around the bed sides would be my dream truck.
What time of the year was this filmed
The last couple days of June.
Sweet FJ! I appreciate the 2nd gen. 4Runner too! Makes me miss our 2nd gen. Thanks for sharing!
Great video, looks like an awesome trip!
Great video, love the old Toyotas, just purchased an 88 FJ62 myself, looking forward to the goodtimes she'll bring!
hey buddy very helpful video i live not to far from you and have engine issue in my 1990 toyota hilux please give me a text or call five one eight 8 70 90 five six thanks ill be looking forward to talking with you