Відео

Glad i could help!

No, the Voicemeeter 8x8 Matrix can control multiple buses simultaneously. Each input channel can be routed to different output buses at once, allowing flexible audio routing across various buses.

What does the error say exactly

You're referring to additional virtual devices installed when you installed voicemeeter potato?

@@DjinnZhad Yes, I think. They come with all versions of Voicemeeter. I have three virtual audio devices: Input, Input AUX and VAIO, and there are also five of those

​Voicemeeter is not necessarily intended for personal use. I assume these devices are installed to accommodate more complex setups in professional use cases. These devices are interchangeable as your default device for recording or output which can be handy when routing to achieve certain effects during playback. Through my years of using voicemeeter, streaming and making UA-cam videos, I have not encountered a situation where I required to change my default device to achieve a particular effect, so I just ignore them. If they really bother you, you can go over to the legacy audio device manager on Windows, which is featured at 7:54, right click an underisred device and click disable to hide them from your menus, and this can be easily undone by right clicking a greyed out device and click enable.

​@@DjinnZhad Oh, OK. I already disabled them, because with those enabled EarTrumpet menu is really long

I wanted to create an equalizer for a virtual cable for FPS games like Valorant, Warzone, CS2 and PUBG. Do you know?

I'm pretty sure this is achievable using the compressor and limiter features in voicemeeter. Turning up the compressor will make quiet noises louder, and the limiter will determine how loud the loudest sound can be.

@@DjinnZhad I use voicemeeter input as a default for games, where do I see this function you mentioned?

If you see my uploads you will find a long video called tour of all voicemeeter settings. In the description there are timestamps. You should be able to find compressor and limiter there

@@DjinnZhad Ok

Well it's URF so idk

Are you able to install? Describe your issue

Check if any of your obs tracks are checked in Output > Recording settings.

nvm

@@everyclankillerrr how

What is not working exactly? Are you able to hear your calls on discord? Are you able to speak into your calls on discord?

@@DjinnZhad nevermind, i found it thank you!

@@Pluxrr how?

That's very helpful. Could you be more specific?

Wired sources with WDM have no noticeable lag. WDM Bluetooth sources have slight lag, still enjoyable but I would not depend on it for performance such as competitive gaming. MME has significant lag and should only be used for audio only activities. This is consistent for VBAN as well.

Feel free to join my discord server and I'll try to help if you can post screenshots

Yeah this app is so hard to use I’m so frustrated

If you join my discord server, you can post screenshots of your voicemeeter setup and system settings and I'll be able to help you better

Do you see the volume levels rising in B1 in the output sliders?

I am not hearing audio anymore because I do not have A1 selected on any source. I don't have any audio playing on my computer other than my mic at the time of recording the tutorial so I took my headphones off and deselected A1 on all sources. Only sources with A1 selected are being sent to my headphones. B1 B2 and B3 are only for applications to hear.

I'm sorry for the confusion. I created my tutorials in order of their upload date so my configuration had changed slightly over time. A1 is for my headphones and A2 is for my wireless earbuds. I selected A2 to test if my wireless earbuds were working correctly. If you check the top right of my VoiceMeeter window you will see 5 boxes containing A1 A2 A3 A4 A5. Beside that is a list of devices under the heading HARDWARE OUT. This list defines what A1 A2 A3 A4 A5 are assigned to in order. The first item on the list is my speakers (which is actually my headphones) so that means when I have A1 selected, VoiceMeeter will direct that audio source to my speakers (actually my headphones). The second item on the list is my Bluetooth earbuds. So that means when I have A2 selected, VoiceMeeter will direct that audio to my Bluetooth earbuds.

I'm sorry for the confusion with the inconsistent setup, I had to do multiple takes. When I have A1 selected, I do hear myself. I like hearing myself when I record because I have big over-ear headphones that muffle my voice when I talk outloud. You wont be able to tell exactly what I hear just from watching the video. I will reiterate my setup for you below: HARDWARE (this is only for you to hear) A1 - My headphones A2 - unused A3 - unused A4 - unused A5 - unused SOFTWARE (this is for application on you computer to hear) B1 - My Default Mic for all applications (unless otherwise specified) B2 - Discord, Zoom, Microsoft Teams (i have specifically chosen this mic source for these applications) B3 - OBS (i have specifically chosen this mic source for OBS) So focusing on your situation with Discord, if you have been following the guide from 20:29 to 23:05, you should have your settings configured for Discord so that your mic input is set to VoiceMeeter output B2 and your Output source as VoiceMeeter AUX input. The only thing you need to do in order for Discord to pick up audio is to have B2 selected. You can select B2 on as many sources as you want. But only the sources with B2 selected will go to Discord. The only thing you need to do in order for you to listen to your Discord conversations is to have A1 selected under the VoiceMeeter AUX source column. Everything else is just for the purposes of making the tutorial. Also, yes I have a Discord Server which everyone is free to join here: discord.gg/b76GXKx

@@DjinnZhad You are awesome. I appreciate the above explanation. Thank you.

Thank you for the feedback and suggestions. I will take them on board for future videos.

If we are looking at the first hardware source which I use for my blue snowball microphone, you will see 3 knobs for Comp (compression), Gate (noise gat,e), and Denoiser. Right under those 3 knobs, you will see Special FX. These are the basic settings that were present before the update 3.1 you can turn these knobs for Reverb and Delay. For the new special FX for 3.1, you can right-click the Comp or Gate Knob to open the Compressor Detail panel or you can right-click the Denoiser Knob to show some new FX options like Wet balance, Pitch, and Formants. I was thinking about making a video dedicated to just navigating the UI but I wasn't sure if it would be very useful if you think it would be helpful I will see what I can do.

@@DjinnZhad We are waiting for your video on this topic thx

Are you still salty cuz you don't know how to English? Casual racism, thats cool bro

Are you still salty cuz you don't know how to English? Casual racism, thats cool bro

best part is we were both master last season lol

wildrift.leagueoflegends.com/

Too thirsty for the thicc

@@DjinnZhad yesir, too thirsty for a kill

League of Legends wild rift for mobile

It was a long play on teemo that i really liked so i wanted to save it

I hide the names of the players out of respect

@@DjinnZhad lmao! How old are you? Do you really think anyone will fall for your bullshit, I mean its the league community but God damn homie that's some next level cope.

@@Valafar. ua-cam.com/video/dH9mRTSdy6s/v-deo.html Naw u right, i hid them to make sure UA-cam turns this into a short

Kwok ShengWai hey what's up

I love your vid

@@kylo9633 aw thanks, glad u enjoyed it