Відео

Where is possible to buy BMS and other components - except LiFe|Po cells?

Hello, are the crimp-on ring connectors (for the ac terminals) included in the delivery? If not, which size is suitable? Thank you!

⚠️ Fraud company!

How do I enable AC CHG: Disable in Growatt SPH 5000TL BL -UP. It keeps asking for password: SC:

Very poor design, the cells are not fixed held in place , if turned to the side fireworks will be the next thing....

Help me please

Jelp me please

Hello

What will happen if, when transporting this box, you put it on the narrow side? I don't think that plate on top can hold the weight of 8 cells (40kg+). Some cells will go to meet other cells, this will be a "fun" and unforgettable meeting. Especially since there is no insulator between them that could prevent this meeting.

What's the diff between min-xh and sph?

and if you know that and you import the inverter and you have missing products and the service is only talking for months fro a 2 dollar product for me than it is trash no servie mean no waranty also growatt go shame your self i do not say the producy is bad or good only time will tell that but i have very litle hope.

and here is not a tool retal shop in a radius of 2000 km not even a solar shop.

it looks iam never going to buy this tool to connect only 2 connectors it is not making sense.

so to be real and looking to the tools needed thi video is only for installers

suprise using other battery connectors may i asume the helos h4 were not doing ther job and who have the the tools to connect this connector to a cable get real

Nice setup!

good presentation, I have a similar inverter but It does not charge from the solar side, there are 250-260 panels voltage

Is zero export possible?

... I finish installing, but the WARNCODE 300 has been bothering me since, help me solve this problem, it's urgent

what is different between sg05 and sg03 or sg04?

To which countries do you guys ship?

To which countries do you fuys ship?

Is the Growatt 10kW Grid-Tie Inverter | MIN10000TL-XH-US a split phase model ? What is the continuous load output in amps ? per phase

Must I use ATS-S

Kann man an dem growatt min 4600 xh ein sting mit nur 3 Modulen zum laufen bekommen? Es geht um die Startspannung von 100v. Der mppt Bereich geht seltsamerweise von 70 bis 500 Volt also teilweise unter die angegebene Startspannung. An den zweiten String würde ich ca 10 Module anschließen.

How to turn on export and what shall be value

Erst Busbar dann das Kabel vom balancer dann die Mutter!!

for all those who wanna run the hybrid sph inverter WITHOUT a battery : you need to bridge the bat terminals on the inverter on the lower right It needs a small copper wire cause that connection will only show the inverter that there is no battery used. If you do so the sph hybrid inverter will switch to a kind of grid inverter like the mic xxxx or min or mod inverters. I guess this is the same for all min and mod hybrid inverters. Check out the manual first and you might search for this line or some words like bat terminal. It is just 1 sentence in the whole manual "If you have no battery now, you can also float BAT terminal, and this hybrid inverter will only work like a PV inverter." float BAT terminal looked weird until I found in a german manual the clear description: "CONNECT the bat terminals on the inverter" which is easier to understand than FLOAT

I want to buy only box , could you sell separately ?

يفضل وضع البطاريه بشكل عمودي حتى لا تتلف بسرعه

Nice build.

Final Fantasy music...

It is best to put on the busbar first, and then the balancing wires.

What is the manufacturer in the battery

queria comprar esse inversor ele é bom ?

Can someone tell me why these inverters put out high voltage high amperage ac through the pv in

What is the price ?

No sign of featured item on the website, and no prices.

Do you have a 25.6 volt diy kit too?

you completely ignore requirement from manufacturer to apply pressure in order to achieve 6500 cycles. Without it - only 2500 cycles.

Help please, I live in mexico, I just installed a min 6000tl-x inverter (only 1), it stay in standby mode so I pressed factory reset in the front panel menu (now I know it was for the poor sun light), I need to know what is the correct configuration in the voltage protection 0,1 or 2, and in the interlock 0,1 or 2, and power sensor on or off, please.

is it possible to reset the amount of created Power (Reset to Zero) ?

is it possible to reset the amount of created Power (Reset to Zero) ?

Is this available in Spain?

My Lithium battery connected to My Growatt has been drained and not charging, How can I fix it and avoid this drainage in future?

can this use for offgrid and charge the growatt batteries ? Do i need to step down to 220-240V ?

Do you have an agent in South Africa?

Hello can you if you have a 10 kw KTL 3 -KH Growatt inverter can you make it a 8 kw KTL 3-XH inverter with software ???

Bună ziua! Vreau și eu un banc de baterii de 5 kw pentru inceput, dedicata pentru INVERTOR ON-GRID Hibrid MONOFAZAT GROWATT MIN 6000TL-X-6KW, vă rog frumos să mă ajutați.

ATENTION !! NO BUY NEVER SOFAR !! BOUGHT 11KTL-X-G3 AND NOT WORK NEVER WITH CHINT DTSU 666 !! SHAME VERY BIG SAME .DO NOT BUY NEVER SOFAR !!