I’m on the flex platform recently and noticed they have a 3/8 stapler as well, picked it up for a job I had an absolutely love it! My buddy’s a Milwaukee guy and when he showed up he was hype lol, he never thought about getting one before and don’t think knew Milwaukee has one. But it feels great in hand, an it also sounds quite nicer. Just my opinion though, I am just now researching the other brands that offer them, I seen Kobalt has an XTR version of one going for 70$ at Lowe’s.
Should have bought a new blade for the saw before wasting money on a hydraulic lift table! Just saying, priorities - then toys. When the motor bogs cutting 3/4" wood stock - most people would recognize there may be an issue. LMFAO
@ReadyRanch I wouldn't use a stubby to test on running bolts in when a drill on hammer mode would do a whole lot better as that's what the tool is designed to do....not saying the tool did bad but shouldn't have a impact do a drills job
@@joeystull5682looks like the impact is the way to go! I could have put the drill driver on the drill selection but I didn’t want to break my wrist haha, figured it was best to have the clutch on at the highest setting. It could be the auto-off feature on the drill that’s shutting it down when it senses too much rotation. Let me know if I need to adjust anything
Well my Pittsburgh was free on a Saturday, so which of us truly wins? You with your fancy tape? Or me with my free tape and family size box of Popeyes chicken?
metal
Just got mine today. I love it!
Oh shit I need this
I have one and its junk
Having trouble with it double firing 1/2 in ss staples
What do you guys use this tool for ?
Loading
Which blade are you using?
👍
Milwaukee blades vs Diablo blades let’s gooo
Nasıl ulaşabilirim size adres neresi açık adresi yazabilir misiniz lütfen teşekkürler
Nasıl ulaşabilirim size adres neresi
I’m on the flex platform recently and noticed they have a 3/8 stapler as well, picked it up for a job I had an absolutely love it! My buddy’s a Milwaukee guy and when he showed up he was hype lol, he never thought about getting one before and don’t think knew Milwaukee has one. But it feels great in hand, an it also sounds quite nicer. Just my opinion though, I am just now researching the other brands that offer them, I seen Kobalt has an XTR version of one going for 70$ at Lowe’s.
Depending on where you live that's a great or terrible place to store your tools... neat though
Wow youre a little tiny fella. That light isnt very tall. Sometimes i wish i was that short bcus clothes⁷ dont look ridiculous on u guys.
Поздравляю вы потратили время в пустую
most tools its a bit of a toss up as to who makes the best but the m12 and m18 multitools absolutely dog walk any others ive used
I like this tool. i have 1 Good work for milwaukee i, which dewalt make 1 cos all my tools ar dewalt
Changing the speed of the drill doesnt change the fact the chuck still kicks out at the same setting. Leave in drill mode
Trash . 4 Milwaukee. Every time in car Shop . All broken .. Akku shaking ... Inst. Trash never ever
Every dentist needs one
Where’s the fail
The drill would be way faster if you didn't have the clutch on.
@@turnmanb I’ll make a video with it off
This comparison is lame, these are 2 machine tool systems specialized for 2 different jobs.
@@dungtm2672 agreed
@@dungtm2672 do you think the drill or impact is more suited for this task?
Cut down a small tree with mine to test it, fuckin stallion of a hackzall
@@neuroticknave6046 it rips
They definitely should have put a staple removing tool on it also
@@anontimothy8 agreed
Don’t text the wife back and she’ll light up the whole damn block
@@FenceAndMore lol
What about with a Diablo blade?
Good video idea!
Why my impact wrench breaks the screw/bolt when torque into wood?
I’ll masks a video comparing with a drill driver
Who cares tired of seeing these videos use a drill works better ..
@@Machinist-wf1iw next video I’ll do a comparison!
Should’ve tried with the HO 5.0
@@brandonbarnwell7992 next time!
@@brandonbarnwell7992 you mean the forge battery?
@@ReadyRanch curious if it’ll make a big difference! From all the other videos I’ve seen it looks like it does.
@@ReadyRanch no they make the H.O M12 battery
@@brandonbarnwell7992yeah definitely looks like it
Выполнение херня
Horrible form!
2.0 battery can only do so much get the 6.0!
I think this had a 4.0 at the time. I’ll make a future video with the new forged batteries
Get the high output 5.0 the 6.0 is kinda garbage the 5.0 brings out the full potential
This is no Silky Saw ;)
@@SilkyEurope I’m sure an actual Silky saw would perform much better!
Mark everything useing you're DLnumber. It can be traced back to you.
@@UTUBESUXS2024 good idea!
Because you're not running it in drill mode ?
@@speedyz28 I’m scared to break my wrist haha
@@ReadyRanch Does this mean that your wrist is weak
@@ramsau543lol6 100%
@@ramsau543lol6I’ll make a follow up video with the drill handle attached so I can drive the lag bolt in on drill mode
Nimm doch einfach mal ein Schlagschrauber von Milwaukee
@@Alex-db1ly even better!
I’ll make a comparison video
Should have bought a new blade for the saw before wasting money on a hydraulic lift table! Just saying, priorities - then toys. When the motor bogs cutting 3/4" wood stock - most people would recognize there may be an issue. LMFAO
Love it!
Thanks!!
My milkshake brings all the boys to the yard
Just noticed I'm late. Clearly great minds think alike lol
That’s a great setup.
@@bikeman9419 thank you!
“My milkshake brings all the boys to the yard, and they’re like, it’s better than yours”
How, how did you know?
@@nathanielgrimes3882 what flavor?
Вкручивать на удобном растоянии- NO Вкручивать так что бы сталкивались инструменты- yesssss
@@WhatsupHands just trying to get the close up haha
Speed one has more torque and drill mode puts out maximum power that it has
@@caydenmaller1408 right. I was surprised even with speed one (more torque) it still couldn’t drive in the lag bolt
You had it in 2 brainiac
Using wrong tool for the job
@@michaelcanard1079 which tool do you recommend?
Impact driver; not wrench
@ReadyRanch I wouldn't use a stubby to test on running bolts in when a drill on hammer mode would do a whole lot better as that's what the tool is designed to do....not saying the tool did bad but shouldn't have a impact do a drills job
@@trentbaldwin2787 It’s listed as a wrench, I know I think it sounds weird too
@@michaelcanard1079thank you for the advice! I’ll definitely make a video comparing, I didn’t know this before 👍
Impact is meant for that.. a drill is not
@@joeystull5682 I had some comments in a previous video saying the opposite. I was curious to test it out myself
@@ReadyRanch Absolutely understandable and I’m glad you did. What’s your conclusion after testing?
@@ReadyRanch Absolutely understandable and I’m glad you did. What’s your conclusion after testing?
@@joeystull5682looks like the impact is the way to go! I could have put the drill driver on the drill selection but I didn’t want to break my wrist haha, figured it was best to have the clutch on at the highest setting. It could be the auto-off feature on the drill that’s shutting it down when it senses too much rotation. Let me know if I need to adjust anything
@@ReadyRanch🤦♂️
How to get nerve damage speed run 😂
I can’t imagine this tool is good for my nerves 😂
TTi doesn't know what to do with this thing, first it was AEG OMNI then Ryobi now Milwaukee 😁
Do you think they’ll discontinue the tool?
@@ReadyRanch TTi still has RIDGID😁
Well my Pittsburgh was free on a Saturday, so which of us truly wins? You with your fancy tape? Or me with my free tape and family size box of Popeyes chicken?
@@clintonclosson4846 you win!
Better off sticking to a nail gun
@@nenepr978able Nail guns are sweet!
It's for places a nail gun won't fit.