Відео

Cheap does not mean just as good.

I get these as well in front left during hot weather. Wasn't sure which bushing/joint was making noises so just sprayed water on all off them and it's quiet for now

When you add siding or something else you are adding tons of holes and they are not taped??.

this worked for me I poked through with a paper clip and it solved my issue thank you very much for sharing

Excellent informative video. I would definitely hire you as a builder if I was local. Great job.

You rock bro. Thank you

Bro it worked

Very good video it helps me with my furnace

thanks for the video!

Thank upu man, ypu are a life saver... working 💯

Sir, thank you so much for the video. It was exactly what I needed to fix my problem. I was so stressed out thinking I was going to have to pay someone to fix the issue. God bless you❤️

Thankyou for this video. I was getting a similar issue with my furnace this evening. After checking the exhaust vent as that's what several google searches turned up for a probable issue with mine I stumbeled across your video. Took the vaccum lines off, cleaned them and re-installed and the furnace fired right up! Thanks again!!

My exact problem twice now in 2 years took a hair comb with metal point end and bent it to gain aces to that nipple end and push it in and something gave debris or something and then my unit started working again.

You're a legend. Thank you!

You're a lifesaver, man. Did everything in this video and it fixed my heater and now it's running like a dream. Saved me money and a headache. Thanks so much.

This is good to know. I wonder how this would stand up to 30 lb. tar paper?

Your the best great instruction 😊

Issue?

Thank you for posting this. It worked for us!!!!❤🎉

DI😓DN'T WORK FOR ME TODAY BUT WAS A GOOD TRY .Should have mentioned not to blow to hard as I did and likely blew out the diaphragm in the switch .

Worked, thank you brother!!!!!!

You saved my bacon, brother! This solved our issue. Great video.

Fix worked like a charm...thank you!!

Thank you thank you thank you! Very easy fix that saved us hundreds today! All I needed was a Bobby pin.

Thank you! I replaced the flame sensor first, as that was an issue previously. It solved one issue but I got the pressure switch error. Your video was one of the easiest ones that explained how to do it. You're amazing!!

Wow. This saved me today. Furnace was doing the exact same thing. Followed all the steps here and my surface ignitor finally came back on. No more pressure switch open fault code flashing. Thank you for posting this video. The family is warm again!

Thank you! Fixed my furnace in 10 minutes!

You saved my life 🙌🏼

holy cow!! I have tried just about everything and was just about to call a repairman when I saw your video. And it worked!! thank you so much Leo!

By golly it worked for my systems! Thanks for posting!

Damn now my problem makes Sense

Thanks. Mine was indeed the pressure switch got clogged up. I used the paper clip to poke thru the hole and it works like a charm!

Awesome video, woke up this morning to a cold house 59 degrees, blowing into the switch was all it took, did not have to go as far as trying to use the paperclip for blockage, service call on a Sunday would have been pricey.

I want to thank you Your trick to clean the orifice was perfect after a week with no heat it is now working .

This worked for me as well. Needed to use a bit of wire to snake into the hole. It was a bit scary pushing through the blockage but once it cleared out, the furnace came right on.

✌

Thank you for doing this video sir. I watched a few other videos but yours was the gamechanger. When you suggested to keep the hose attached to the switch and suck back to hear the clicking. It worked. Much appreciated!

Man thx you you are verry smart

That was the exact problem with my Lennox ML 180DF furnace. It looked like some old bug bodies were clogging up the port. Thanks for posting up this video!

Excellent trouble shooting!

This was so helpful thank you!!

I tried jumping mine like you did, but furnace never kicked on. I checked for anything plugged up and was all clear. So could the pressure switch be bad?

Saved me a repair call! Thanks!

thanks, you answered a question i had for a long time≥

This video just saved me a $70 hvac visit! Many thanks!

Thanks so much for this!! I have heat now!

Thank you your video really saved the day.👍

Thanks for the video. I’ve had this problem too and have been clearing like you demonstrated by blowing/sucking on the hose that connected to the pressure switch. My problem seems to happen on windy days. I’ll have to try cleaning out the inside.

Brother thank you so much last night was cold now I got it working ❤❤❤

I'll add my thank you's to all the others. Just at dark on a cold Saturday we noticed the house getting cold. I knew it probably wasn't serious but didn't know where to start. Your video was exactly what I needed. I followed the steps, put the hose back on, flipped the switch back on, the flashing code went off and the furnace fired right up. You showed and explained everything perfectly. Thanks so much!