Відео

Appreciate you!

Thanks so much! Glad to have you aboard!

Glad you enjoyed!

Thanks for the sub! Glad you enjoyed the video!

These are neutral headphones. Technically they are for mixing. The reason why the frequencies are bad is whatever you are listening to is poorly mixed. Since you don't like any of the frequencies, what you are listening to is probably overly compressed.

@@orlock20 actually no, neutral headphones don't sound bad. The sennheiser hd600 and hd650 (the hd6xx is just an hd650) are neutral headphones originally intended for studio use and are loved in the audiophile community, whereas the M50x are not. Plus, when looking at graphs the M50x don't measure as flat as the HD600 do (and on the two graphs of them that I looked at the M50x had pretty horrendous channel imbalance). I also know neutral isn't boring because I have speakers that I have EQd to be dead flat off of anechoic measurements, and they sound miles better than the M50x. The N700NC M2s I mentioned do have more subbass than the M50x (they are not bass canons though), but they are tuned smoother above 100hz. And don't have channel imbalance.

@@elliottsalt Those headphones cost 3 times as much as the M50X. At that price, they should be better.

@@orlock20 true, but just because something costs more doesn't mean it is better. There are a few examples in where expensive things are not worth buying or just plain bad. The KSC75 I mentioned, while not having much bass extension and being a different form factor, are still a headphone that cost 5*/4* less than the M50x yet have better channel matching between drivers and a smoother response than the M50x. I'd make a point that from 100hz and up the KSC75 graph better, and only get better when you put them on a headband+give them yaxi pads. from owning and using both for a long time I prefer the KSC75 (I say this as someone who *really* likes bass) My original point wasn't that you should buy the HD6x0 series over the M50x, they are 2 different headphones that do different things for different people. My point was that being neutral is not an excuse for being a bad headphone. If you want an alternative that's around the same price then I'd go for an AKG k361/k371 or the rode NTH-1 as they are just outright better.

Got it installed just fine with plenty of space. Kind of awkward to tighten once you get everything set but nothing too bad, just takes a lot of rotations since you cant really get your wrist down there to twist. But overall has plenty of space to mount and move one around wherever you need. Hope this helps!

@@AustinDavisYT that’s exactly what I needed. Thank you sir!

Are you able to put the laptop mount to the left or right of the desk? Does it have to be connected to the back?

There is not a lot of room on the sides. Toward the front of the desk you could for sure attach one on the side but toward the middle and the back on the sides, The supports get in the way. Depending on your mount, you might be able to attach one but the one that I have myself wouldn't have enough room.

Thank you!

Glad I could help! Enjoy your new desk 🙌

To my knowledge I don't think anything like that does exist within Premiere right now. The closest you can get is using a keyboard shortcut to turn it on and off. I believe the default Premiere shortcut for it is Shift+S but I currently have mine set to Shift+Y. This allows you to turn it on and off without having to go into the menus all the time so still very useful but not a hold down and release function like you're describing. Hope this helps! And best of luck learning Premiere!

Thank you!! Glad you enjoyed and to have you as a new subscriber!

Glad to hear!

Yep the headband does peel over time. Still great headphones aside from that. The headband on mine didn't start peeling until years down the road too. Will have to agree to disagree here!

My father bought these headphones in 2019 and have been using them every day for at least 2 hours. Several months ago, the earpads started to peel off, and the headband is slightly damaged. So five years ain't that bad for the money they cost. Keep in mind that Audio-Technica solds spare earcups. Even peeled off, they still sound amazing, and I am considering buying them again

⁠@@venkata7226hey first thing I do with m50 is get velour pads they last pretty much forever and run less hot than whatever fake leather is used. I think there might be a silk type material headband wrap so it’s not a lot of friction and no peeling.

Mine haven't peeled....yet. have had them for 5 years now

If you already have $500 in a setup I’d have to agree that buying this wouldn’t serve much purpose.

No problem, glad you enjoyed the vid! It’s well worth the investment imo.

M40s are more neutral, better for monitoring, m50x have a little bit warmer audio with better bass, just as good for monitoring but better for listening to music for general public, they are still top for anything you throw at them though, I would go for the m50xs as I prefer consuming content rather than creating it.

I have only ever used the M50x’s so I don’t have an opinion but @HozDHearts came in clutch with the great info. 🙌🏼

It took just over a week for me to get my unit. Roughly 8 days if I remember right, that could vary based on your location. No issues yet, just absolutely loving it! The magpad has been great and doesn’t hold up my mouse a bit. Haven’t done any writing on the pad itself yet just on notebooks with hardbacks but I wouldn’t see how it would interfere at all. The one thing I will say is use a coaster for any drinks as condensation of any kind likes to stick around on the pad quite easily. It’s definitely a hefty investment but one well worth it imo. Standing desks are nothing to cheap out on as I’ve seen numerous cheap ones that wobble and break inside of a year which is why I waited so long to pull the trigger. The cable management is probably my favorite feature. Having the power feed through the desk itself into a nice concealable tray is absolutely fantastic. Appreciate you tuning in and glad it was helpful! Hope you end up snagging one yourself!

I got a free turntable to make an unboxing video and one that actually sounds pretty damn good. That’s about it lmao. Just sharing my first experiences in vinyl and turntables in the form of this video. Thanks for the comment tho 👍🏼

I'll take a like any day

No problem! Glad you enjoyed it!

Back when I worked in a department store I was right next to the turntable section. To tell the good ones apart from the bad the biggest and easiest way to tell is price. Again I'm far from a turntable expert but approaching it from a very entry level position, when it comes to all in ones, I'd say your floor price is $200. That is what I observed when working in that department store. Once you got to that price point most of the units actually sounded pretty good. Everything else was pretty much junk. The one in my video sounds way better than any of the all in ones that were ever in that department store which is why I actually enjoy it quite a bit. Whatever unit you're looking at, definitely do your own research prior to purchasing. Not sure if that helps answer your question at all but hopefully it helps in some way!

Thank you!! Glad you enjoyed and glad to have you here as a sub!

Love it! Enjoy your fresh pair!

Yes they're great! Back when I first bought mine I had the same mindset of spending a bit more on headphones until I found these. The best 💯

Great additional info! I wasnt aware of the calibration until a bit later that day after putting it together but like you said it only took a few seconds, not hard at all. Glad you're liking yours and that you enjoyed the video! Appreciate you!

Where did you get the earpads? What music app do you use with amp?

Thank you! That’s such a bummer though. Hopefully Secret Lab can eventually expand out to you!

Thank you!!

Thank you Sir!

To change it you can throw your camera in Manual mode (M on your dial) or Aperture Priority mode (A on your dial) and usually you can change it with the front dial near your index finger depending on which camera you have. Could also be set to the back dial as well. Hope this Helps!

I was the same way and opted for the standard size and i'm glad I did. its plenty big enough, especially if you mount your monitors or utilize the pc shelf add on. I have been LOVING mine so far, enjoy yours when you get it!

solid video - but brother that noise was driving me nuts. nonetheless thanks for the video. I have PRO XL arriving tomorrow

Chains coming off for most videos now because it drove me nuts editing it lol. Thanks for the kind words regardless! Enjoy your desk 💪🏼

Picasso level cursed

All of that means a ton, thank you James!!

I did my best to translate this but I apologize if i got anything wrong, I agree tho! The build quality is great on these things and a big reason why I love them. I haven't tried the BT versions but i've always been curious to see how they compare to the wired ones. The M50X's are HARD to beat so i'm sure the BT ones don't sound near as good.

Thank you! Glad you enjoyed!

Thanks for being a killer cameraman 🎥

0 comments and one like ! lemme fix that

Thanks bro!

I will admit my wife picked it out for me 😂

Appreciate that! Hopefully I’ll get there. Just gotta keep going 🫡

I respect the way you went about this comment a ton haha. Also a very good point about associating normal with bad. Maybe I can revisit them in the future or try out whatever Apple has planned for the 3rd gen of the Pros. Hoping those will fit my ears better because the ecosystem of my other Apple products with the Pros was unmatched.

@@AustinDavisYT Glad you saw my comment! Incase you were talking about the 1s, i think the 2s are far better. And im hoping the 3s follow the same path.

And as for fit, i do agree they could be more comfy

Thank you, glad I could help you in your decision! My current room set up is definitely not ideal 😂 Having a closed office room would help tremendously, I’m in more of a den right now. Appreciate the feedback! I might see about getting some boards up soon!