- 20
- 48 334
superior
Приєднався 2 жов 2007
Відео
Romer g Logitech switch and volume wheel repair G810 G910
Переглядів 23 тис.3 роки тому
replacement volume wheel encoder 5mm: www.aliexpress.com/item/32873160208.html?spm=a2g0o.order_list.0.0.21ef1802KhWYdq volume wheel wiring: i.postimg.cc/Kz21Vw1Z/PXL-20220123-160008471.jpg contact cleaner with oil that I used: www.perfects.eu/product/technical-maintenance/contact-cleaner-spray1
Hello! Would it be okay to use it in compilations and maybe on some of ours Social Networks? You will get full credit for it. Thanks
🤣😂🤣😂
@@superior284 😂😂🤣🤣😂😂
Ασταμάτητος χαχαχαχα
Πολύ καλό σουπίδι !
To pink είναι αυτό?
ναι πολυ παλια
I had sticky keys in my G810. Here is what I did to fix them. Pull the key caps off. Clean all the gunk out of the board. Spray each sticky switch one at a time with DeOxit or WD-40 Contact Cleaner. Put the key cap back on and press several times which will clear the oxidation. Repeat for all sticky switches.
Thanks for posting and Happy New Year! By the way, @12:56, your English is excellent.
lets be honest, this romer-g sucks... afterr about a year, it starts doubling the click and failing or getting stuck.
I would like to know how to replace those diodes)
hello. 19:49 Can i ask What are you applying to the electrical board?
soldering flux
@@superior284 thank you so much ! Have a good day Mr. staurwmenos :)
Hi thx for Video. I soldering 2 switches new one and now the led light is working but no other, another switch is not working too. What can be wrong ?
I ordered a TTC encoder and it works through a step and adjusts the volume in 4 units instead of 2 units each step as in the original. Have you found an encoder identical to the original one?
I couldn't find an identical one. I used the one on the link bellow the video. it adjusts the volume in increments of 2 but it is not consistent. sometimes it is 4...
@@superior284 I found a solution. Need to order any 5mm encoder and remove this part from it: i.postimg.cc/tTxL6Lpw/IMG-0747-1.jpg After that, the volume control will be smoother like the original.
@@MegaSlota thank you I will definitely give it a try
@@superior284 I ordered several brands on Ali and I can briefly talk about them: 1) CanHui - cheap standard, no lubrication inside, big wheel gap (not recommended); 2) TTC Green - larger elements inside, lubricated, can be recommended; 3) ALPS - standard, lubricated, copper contacts, no 5 mm size (recommended if you will use a file and wire cutters for 7mm size); 4) Huano - standard, lubricated, harder to disassemble, closed case (good dust protection), recommended.
great video. thanks a lot
Thanks for video! Helped me a lot fixing my keybord! You legend!
19:55 Quelle est le produit qui est injecté ? Quelle est son utilité ?
I was able to repair both my chattering keys and volume wheel by just spraying WD-40 - Electric Spray inside them. Everything works without issue now.
Nice tip, I think these switches have tendency of being oxidized after awhile. I usually put isopropyl alcohol but that only works for a short while. I will try yours method next.
Dude! My tab key would fail like 70% of the time, cleaning it with compressed air or alcohol did nothing. 1 spray with wd 40 right inside made it work 100% of the time!! I love you thank you
Thank you for video. Where did you get new volume encoder?
Here is a link. buy the 5mm ones. The feel is not identical with original encoder, it is a bit rougher, but gets the job done and they are extremely cheap. www.aliexpress.com/item/32873160208.html?spm=a2g0o.order_list.0.0.21ef1802KhWYdq
i took mine apart because the volume roller was tight to turn and it looks like the roller switch was in sideways and when i went to turn it the wires broke off and i dont know which wire goes where there are red blue and black. can you tell/show me the correct wiring order?
No color coded wires on mine. I posted a link to an image of the volume wheel wiring in the video description. I hope it helps.
you are a very persistent person 👍💪
Can you replace the LEDs underneath the keys?
I don't know. I have a burnt led as well. It should be possible with the right equipment and skill. The problem is I cannot find the part number to order replacements. If anyone has that info I would gladly give it a try for science purposes.
@@superior284 Hello! Thank you for your DIY video, helped me a lot! Don't know if this helps, but LED part Nr. SMD 0402 1010 RGB. You can find more info on reddit.
Can be switched to a mechanical switch?
romer g are mechanical switches
They are mechanical, as stated by Staurwmenos, and the PCB is incompatible with any other kind of mechanical switches. You can only use Romer G switches on a Romer G keyboard.
Sorry for the English (This is Google translation). Isopropyl alcohol is a good cleaning option. But the brush does not rub the contacts well. On the mouse, cleaning with a concentrator blade helped me (for about a year). Then you also need a thin, hard absorbent material - a toothpick with isopropyl alcohol. WD-40 is a rust thinner. It dries completely in 1-2 weeks. It is better to use a thick, conductive grease
It is not wd-40. It is electric circuit cleaner with oil. Removes corrosion and oxidisation and the oil stays there and improves electrical conductivity. I've tried the toothpick option and it doesn't clean well. Plus it is very time consuming, good luck cleaning 100 keys like that. I don't use that keyboard but I ve just tested it and it works so far.
@@superior284 what kind of oil you use for improving the electric connectivity?
@@ngocehgayabebas2118 www.perfects.eu/product/technical-maintenance/contact-cleaner-spray1
I have just broken my w key , it's a relief that I didn't completely lost the w button just need a new one
I have (tap) and (ctrl) their teeth break, so I did stupid solution which is glue the upper switch with the white square stick in the keyboard, and the problem the glue goes down and stuck with something down and now can't use the key anymore, but overall this is shitty keyboard and waste of money, should be designed to withstand a lot of press.
@@iAbod100 Lol, that's what I had been through with my W key. I tried to super glue its broken parts then accidentally glued the key to its socket because the glue spread there somehow... Just buy a new socket and key then do solder it yourself or have someone do it. If the motherboard of the keyboard is not affected it is all fine. I have G810, and lost my W key after a year or so use
great job
Soooo much better than todays Prog shit
nice!!!
bleach ! :p
3:15 TOP
Nice job!
nai file.alla to monopati einai xalia twra de sto protinw na pas
re file o dromos pou katali3ate se pio meros tis pentelis einai?einai konta sto stratiotiko nosokomio?
κ γαμώ τις τούμπες ρε :P
wraioooos!!
den eixa sfiksei thn kamera kala den einai toso xalia. alla na perimeneis ligo perissotero kopanima apo ymitto an einai na pas. isxuei oti den exei flow pantws einai full texniko
megeia
O μπροστινος ειναι μεγαλο ρεμαλι !! Ξερει αυτος. Μπραβο σας !
infected mushroom's forum brought me here! ;D
Possibly the best album since The Lone Deranger. Unfortunately I believe they split up some time after it was released so don't hold out hope for a follow up album. :(
this is the craziest sh*t i've ever heard!!! are there any new releases from the misted muppets?
noo
fuck its good so goodddd
lol @ bleach reference
there is an orgie in my brain
Goa is an genre But it might be full on Goa [Goa with fasts kicks] ;)
dis is som good shit but old - u need to uploade som new 1s 2009 2010 damn
Incredible fullon track 5 of 5 stars, when is their next album out ?
Awesome tune, pity i found it on youtube because i wanted to upload it >8 P
misted muppet ! rullzzz ! they're the best in what they do ! no offence for the other bands !
the misted muppet were the gods of psy trance, so fucking complex melodic and psychedelic sounds are rarely produced. 5 out of 5.
i aggreeeeee with that...so fucking evil :]
this track is fucking sick. so evil and powerful. misted muppet are geniuses