Відео

Hey bud I really like these side steps where can I get the exact ones?

I took it in a VW Golf after Google Maps decided that was the best route to my uncles house, and it was after sunset, just a few months before you posted this. That was entertaining.

ty

Great video! I highly appreciate niche install videos like this. It gives me a very good idea of the depth of effort required to install this piece of equipment.

Does it drain ur battery at all? It's draining mine and I always have to jump it off with my jump pack.

GET YOUR DEALER TO DO IT FOR FREE. For 2007-2011 Wranglers, there is a recall on this. Check the two NHTSA Campaign Number: 16V288000 and 13V176000. My dealership was going to charge me $1600+ for a new airbag on my 2011 Jeep Wrangler. I had to ask 3 different advisors to have the "technician" check the clockspring first. They finally checked and replaced the clockspring under the recall with no cost to me.

Thank you for your video, it really helped me out

Very nice

Defiance is a new brand to me. I have been researching and watching many multitool reviewers and never saw this before. The LM Micra is a terrible scissor. You pointed out one of its many failings. Cost is also ridiculous for its terrible performance. I am liking the defiance tool. Especially with the micro driver. You should try a cut test with the scissors on different hard to soft things. I personally use Nextool products with a low price point and great scissors.

I think you hit the nail on the head with the hammer multitool. I carry a Leatherman Surge but have been trying to use these types of cheap hammer multitools as first use beaters. I'm loving them. I like the larger 7" ones better even though they don't have locks. Right now they're able to deal with about 90% of everyday edc tasks. They do add extra weight so I just put them in those XL cell phone cases and clip them to my belt when I set about doing involved tasks or chores. Think they cost me about $11 but I can use them, abuse them, and even shave.

I’ve been looking for small scissors for edc, and came across this review. Thank you!! I just ordered from Defiance using your link. I feel like I’m $30 poorer, but otherwise richer. Again, thanks. Looking forward to receiving my tools.

I have 2 roxon scissor tools that are great. Ks2 and m3. Great quality and value - worth a look!

Yeah that's disappointing with the Micra. I had the same issue on the much smaller scissors on my Leatherman Squirt PS4, they couldn't cut fine materials like cotton thread as it would just fold between the blades, and they weren't up to cutting thicker stuff like cardboard or paracord either. Then the spring broke so they're now completely useless. As it's discontinued now, if I send it in to the UK Leatherman dealership, they'll send me a Micra back. I don't know what to do and either way it's not the best outcome, unless I got lucky with a Micra and it did cut better than yours. However the Nextool Mini Flagship has similar shaped and sized scissors as the Micra and Splice, and they are excellent. I don't know if you know Maxlvledc channel but he tested a number of multitool scissors and those came out on top. Additionally the Mini Flagship has small pliers like those on the LM Squirt/Gerber Dime. I've had mine a couple of years now and I don't carry it every day, more like a few days a month as I have a lot of other EDC gear, but it can do any job I come across, within the limits of it's size. The little 2D Phillips on it is surprisingly good, way better than the one on the Squirt and presumably the Micra too.

I bought a Gerber Splice and it was unusable. Almost impossible to open the tools and the screws were stripped so I couldn’t adjust it. Threw it in the trash.

As an update two days after this video was made, my wife informed me that the Gerber Splice has failed, breaking apart at the scissor pivot.

They should really make a micra with pliers. I’d rock a multitool that says Micra P on the side ! Hahaha. Honestly I have a micra and the scissors aren’t the best. It’s the sleekest with the most pleasing appearance.

Consider keychain sized Victorinox. Look at the Rambler or the Mini Champ Alox.

I love my defiance tools🤙

Just seen video, exactly what was going on,bad coil,changed fuse,back on road,thank you for the video!!!

OBTW.... not having the bypass valve in is no problem. Its function is in case your filter clogs. At that point, the oil pressure will compress that spring and allow oil to "bypass" the filter. Without it installed, you just running oil thru the filter as normal. Hope this helps.

What roof rack is that and does it hold up on the soft top? - thanks

I can’t turn mine on or off unless I’m 5 feet away.

Where’d you get the fishing rod holders ? And the hood protector. Cool video. Think I’ll subscribe. Like the new look too by the way. Worth it.

Where is the best place to purchase the clock spring for a 2011 Jeep Wrangler other than the dealer?

QUESTION'S FOR YOU SIR???? I am desperatly trying to find a board like this for my new truck. My preference is a FRAME MOUNTED board but i cannot find one. My question is how well did they these hold up for you? Did they flex, sag, twist etc at all while you owned the truck and used them? Would you recomend them? I am also on the larg side of 220 lbs. and these will be used daily. I hope you see this question yesterday as i am in desperate need asap. Thank You Very Much, Darren aka wabug

I just ordered my wheels spacer 1.5 inches. I'm running on 35 inch tires. I hope no rubbing 🤞

Your tire size is 33? Not 35? Good instructional video brother 🤙

That's why i got the sasquatch package

Absolute gem. Where did you get the bull bar? Did you also lift it and add wheel spacers?

You forgot to remove the bottom of the broken plastic clip. I had similar issue.

Love it, don't listen to the haters.

Have you had any issues from running that cable through the vents in the back yet?

Did you only put them on the front? And how do they work?

Speeds at 80-90 mph feels as if you never installed them? No weird sounds, etc?

What color is this Bronco?

Where does one get a pair of wizard pliers??

This is the best ❤

push tab 2 clicks down into tower

It's not yet complete. Try an infinity sticker from hydrascape

Installed these exact spacers on my daughter's '21 Badlands and also installed 35's about 10 months ago. Have had zero issues and she does aggressive off-roading and 70mph highway speeds.

Wow!!! Im dam impressed . I have alot of questions but im only gonna ask one. I have a wildtrack i tried like hell to get the modular bumper but no dice. You said you had the Jcr bull bar, and the rough country hidden winch mount. Is that bumper you habe the ford modular bumper.? If not what is it. Ok so thats two questions lol. As a fellow radio guy and beach guy) I love how you mounted the gear!!! Great video

Hi!! How are these KSP spacers holding up? I get my badlands in 2 weeks and have these spacers waiting to be installed! And what is the torque spec you are doing for the spacer and the wheel? Thx friend :)

How have they been at high speeds?

Real good video. U could have avoidednthe whole project by switching to Verizon !!! Lol. I woukd like to know two things . What kind of cell phone holder/ bracket do u have? .maybe u can show a detail vid on how u ran the cable. ,I know the jeep real well but it seems impossible to run cables through the Bronco

I just got a set of these as well. Do you know what size Allen key you used? Not much clearance for the top screw on my rock rails

Wow you have everything I want for my Bronco great job man

Nice rig! Love the mods you have done....

Link to that slide?

Also!! I see you have a roof rack on your soft top!! What kind do you have and can you still open the soft top? :) thx subscribed!!

I was looking at these for my badlands (non Sas) and comparing to the born off road ones. Are the KSP high quality and reliable brand as Mishimoto