Відео

@@urbexingTss yes there is. if you google jaakko fagerlund abloy classic lock pick you should find his pick.

@@juhaojala4 terve, teen oikeastaan kaikki tiirikat itse.

Random lock picking / blind picking is for sure more challenging and not so commonly presented in youtube for high security locks. In locksport you only pick locks that you own and that are not in use. If used pick is able to turn all discs to all possible cut positions and its possible to jiggle test them, also blind picking is doable. I have blind picked Abloy locks up to Sento. So far have not got any keyless Easy padlocks to give a try, but have pwned many Sento/Exec/Profile/Classic padlocks.

@@angelosangriomesa7032 no, but i dont know which material those gold colour ones are

@@angelosangriomesa7032 no, nowdays they are new silver (uushopea in Finnish), not sure how it translates. i dont know which material used earlier, but not gold

@@Rakaikun this is a learning platform / toy for a beginner, not for a top end pro like LPL ;)

@@nyosdroid868 heh, picked is picked :)

this was my original idea. I also planned to have a display to present some text & running timer. Then i realized that Arduino Unos that i have are somewhat limited with available IOs for all this, would require extension IO board for Arduino. Additional todo with Arduino: I use 12VDC leds, those can not be fed using Arduino digital outputs, transistors / similar required to fed higher power to leds. And pulldown resistors required for all digital inputs to detect lock openings reliable. All those require some effort to make, so i decided to do this game in smaller steps: its nice to get learnings from the user point of view early

@@laurenarndt464 thanks! rear tensioner is a shaped 1mm diameter ejector pin. picking tip tube is 1.5mm steel tube. picking tip is piece of bbq stick silver soldered into steel tube. ejector pin and steel tube ordered from aliexpress. bbq stick from local store. maybe could use 1.5mm ejector pin for rear tensioner, then would get a bit more robust 2in1 pick

@@idanhurja I see Aliexpress sells seemless capillary tubes, for example 1.4mm ID by 2.0mm OD. But, I suspect the material is too soft. What steel tubing are you using? Please, be specific.

@@LockFumbler well, "traditional" rear tensioning approch not functioning, so then its good time to try something different. my second key was functioning one, first i failed to decode the lock correctly

heh, it was all well under control. i was not afraid of snapping picking tip :) . You are absolutely correct, there was plenty of free space for the picking tip to move around in the lock. In this case i used shaped spring pin as front tensioner. Its not exactly round shaped. Any steel tube would be better.

@@jackgates6949 thanks! unfortunately pick is not avail commercially. its home made by i. some other are selling picks for export version of abloy exec, like Hux maybe. if you google silver bullet pick might find it

@@idanhurja If there is enough interest, I could see if producing these commercially would be possible. Have to see what profiles it would work withh or if an universal version could be made.

@@shmalevolokno english :) but with finnish dialect

thanks! @@JONSLOCKPICKING in sento disc controller is so tight this idea might not function or would require more tuning for the lock

@@idanhurja I think Sento would require off-center picking tool but the method that you used in some older video, namely silver soldering (or even glueing) a tube to half of the key and using that as the axis of half a picking tip, should work for every Sento lock unless I'm mistaken. However, such a tool will have a lot more play and identifying binding disk from slightly moving disk will be a lot harder. You can always decode a disk detainer lock as long as you can apply tension to the lock and then correctly identify *any* binding disk. That will get the lock open after tensioning the lock up to {number of disks} × {possible gate positions per disk} times which is obviously much easier task than the one in {possible gate positions per disk}^^{number of disks} you would have to battle against without feedback.

@@MikkoRantalainen that is exactly how i have picked Sento locks: one keyway side using pick. and turning those binding discs

@@Vision-xf8gl could be so, i have always considered locks as equal :)

I used Aliexpress to order materials. There are also other alternatives. With Aliexpress there is always risk with material quality, but so far i have been lucky.

@@idanhurja awesome, thanks 😊

locksport:ssa ei kuulu pelata käytössä olevilla lukoilla.