Відео

Thanks for comment. Start with these St.D/R - 7/8 Th.D/R - 5/6 SVT - 5/6 then make very very small adjustment to SVT if car shakes too much on a driftable surface. Start with speed setting of 50%. Please let us know how you do

⁠​⁠@@markshomehobbiesi recently ordered mine and i didnt think u were goign to respond just the next day, so thanks for responding! subbed. just to make sure ‘th’ is throttle ‘st’ is steering and i dont know what svt is

@@captainpowblox7172 SVT controls the amount of gyro vs human steering input, the higher the setting the more gyro effect.

@@markshomehobbiesty for helping answer my questions good sir❤ i will give feedback if this setup is good😊

Thanks for comment. Start with these St.D/R - 7/8 Th.D/R - 5/6 SVT - 5/6 then make very very small adjustment to SVT if car shakes too much on a driftable surface. Start with speed setting of 50%. Please let us know how you do

Its gear driven with a motor/transaxle.

Thanks for the comment. The drifter really only shakes bad if you have a surface with too great of surface tension (tackyness). If you get the same track as I got you will find that it shakes a lot less, and will drift great once you dial the settings in to your driving style some.

Yes I saw it but I have so many dang cars alreafy

Thanks...comments are really helpful for the algorithm

I also feel like more people should have their own UA-cam channel and show off their own special talents. I'm not the best content creator but I try to keep it interesting for all!

I do know and I bring it in smaller qtys.

Heck your a mile away, I'm at 10/Ryan

Its at Peter Kaltz & Engleman

I subbd so make video of it when its done

@@markshomehobbies Will do.

They are both just springs and the aluminum ones never did improve the driving. a Gyro some camber, a little caster and a steering rack setup is the way you want to go if you want to drift it RWD

@@markshomehobbies I'm not into drifting. I'm setting mine up for a small clay oval. Think: Modifides /Supermods./ Sprints.

@@williamsaloka9043 Nice! I have a sprint car body, wing and chassis components already designed and 3D printed. Just doing a bit of fine tuning and r&d before I do the video.

@@markshomehobbies I like the drifting, but for me, I'm very much into the oval stuff.Would love to see your oval stuff. These little cars are mini Mud-Boss material. I'm surprised there isn't more of that with these cars.

@@williamsaloka9043 I'm in if you ever want to race and are close by Michigan.

Its 36" x 52"

@@markshomehobbies cool, a very manageable size if space is limited too, thanks!

Odd to see it in a suburban neighborhood though.🙃

It was odd for me too, for as many times as I have riddin in this area I never noticed it.

Its not the first time I've found one either...ua-cam.com/video/noxGR-XTdAI/v-deo.html

If you are just painting 1 body than a rattle can is fine, but an airbrush will always produce a better result IMO

Thanks for the sub and comment. Start with these St.D/R - 7/8 Th.D/R - 5/6 SVT - 5/6 then make very very small adjustment to SVT if car shakes too much on a driftable surface. Start with speed setting of 50%. Please let us know how you do Reply

@@markshomehobbies thank you!

Thanks for the sub and comment. Start with these St.D/R - 7/8 Th.D/R - 5/6 SVT - 5/6 then make very very small adjustment to SVT if car shakes too much on a driftable surface. Please let us know how you do!

@@markshomehobbies I thought my car was broken with how it shakes

Both my bikes charge from 1 to 5 bars in about 5 hours

It tells how to unlock in the owner manual, its like hold the power button for 5 seconds then push the + key but check the manual.

@@markshomehobbies got it thanks

Thanks, I am going to do a short scale fretless in the future also,

Its shrink tube shhh

Thank you!

Yes I use 100% and dial in the D/R. I didn't know that D/R is off on those settings, thanks

The track is about 2.5 x 3.5 ft. Yes you can bind any of the cars to the same radio using the bind clip. I bought on Amazon but you can get on AliExprss or Ebay. 22 , the avenue, thats the place where we all go. Eddie rules!!!

I use the Vectric GRBL post processor within Aspire/VCarve

in fact do you think you could get me one it would really mean a lot since I'm broke?😥😭😭

I already did ua-cam.com/video/LzX_dAUuvnY/v-deo.html

Chitown is only 8hrs from here, maybe some day.

True, but you must have fun at times with driving styles that require more throttle and guts than skill! When we get all the drivers competing on the upcoming NASCAR tracks you might see more skill and knowledge then, as this was merely tuning and testing.

You need to hook up the speed control to the radio throttle channel, then tape off the motor wire ends from the speed control so they don't short. Then turn on the transmitter and connect a 7.2v battery to the speed control. Use the switch for the speed control to turn the sound unit on. Then bind your sound unit receiver to the same transmitter that you drive your car with. Its that easy

Ok no problem, I have some other people to race against now

www.amazon.com/dp/B09ND1VL75?psc=1&ref=ppx_yo2ov_dt_b_product_details www.amazon.com/dp/B09ZLCGDGW?psc=1&ref=ppx_yo2ov_dt_b_product_details www.amazon.com/Brushed-Motor-Speed-Controller-Brake/dp/B0892B2N41/ref=sr_1_8?keywords=brushed+speed+control&sr=8-8

I am looking for some proper and worthwhile .stl body shell files to print/modify, if you know of any please feel free to contact me @woodtech@duck.com I can modify them to the correct scale

Yes but I haven't found any locally yet and the ones online are waaay too expensive just to find out they aren't true scale.

Thanks for the sub and comment. Start with these St.D/R - 7/8 Th.D/R - 5/6 SVT - 5/6 then make very very small adjustment to SVT if car shakes too much on a driftable surface. Please let us know how you do!

Yo

@@markshomehobbiesI’m gonna get the niva the new remote is really cool

@@DJIDroneUser You will enjoy it for sure!

@@markshomehobbiesthanks 😊

Bravo! Thanks for the kind words my friend. I will be doing many more drifting videos for sure!

The price for scrap is found on the I-scrap app or just google "#2 copper wire scrap price near me". You take the wire as-is to any local scrap yard that buys copper. No need to strip it.