Відео

Not a good example of a transmission oil change. Its much more involved than that.

Es motor turbo???

What happens if te registered is not performed?

Good video. I wasn't forsure how easy this might have been.

Absolute idiot, working in a garage with a mask on. Asians are such obedient little communist slaves to their J masters. The J is not Japanese either.

What were the torque specks?

The wheel nuts were put on with a windy gun, and when torque, there was no travel. Maybe already well over the torque setting

Ive the 2ltr skyactive G. At low revs in 2nd she hiccups and hesitates. Those valves are the problem i think. Garages charge 6-700 euro to do the cleaning. Might try myself using a pick and scraper.

At how many miles was this maintenance performed. Im sure many people including myself would like to know. Or when is a good interval to do this maintenance. Please let us all know, thank you. Great video btw

Good clean hibt

Why the coolant add just pour water. Suppose to be red Amd full concentration

What if an ecu is totally flashed with a backup memory from another car with low clock, then your tool just can't detect original clock!!..or there are other memories in the car that can store data?

Excellent diy without the fluff. Thx!

My favorite how to video. Just show you the where and how without having to watch someone ramble about shit you don't care about for 5-10+ minutes.

5 litre 5w40????

Shit that battery is huge

How much torque did you use for the bolts, nuts ?

What I just thought

Nice job! Thanks for posting!

What happens if u don’t register the battery

my guy just blow the air filter and put it back lol

Nice video, but... 6:12 don't do that, bro!!!!11

Beware! Its NOT that easy. More items needs to be removed before its possible to remove the unit from car! 😳

Doing mine tomorrow when the gasket comes in. I might clean the injectors too. I have a small gizmo from eBay that allows me to sprays a solvent through the injectors. I’m also going to try oven cleaner

How many Miles/KM did this car have? Thinking of doing a manual cleaning, my 2014 M3 has 121,000Miles/196,000KM never did this. Wonder how bad it will be, lol, my car idles at pretty low RPMs, I've legit seen it sit at 550-600RPM's idle and the engine shakes a bit and causes the car to vibrate a bit at idle, wondering if this would help?

Only video that shows this

How often do you replace spark plugs?

Hi...tis intake is so dirty....can i know tis car mileage?

Crock of shit it even has to be done. Im trading mine in.

Damn where's your garage need it done

Wrong wrong wrong

that is wrong . let the professionals do the job

Nice...Question, when to change ATF?

👍🏻 Where can I find the torque specs for all the nuts and bolts? 😊

How many miles had the car run to get this amount of carbon build up?

You blasted the valves when closed I hope? Second cilinder looked the valves were not completely closed and coconut pieces were between valves and head.

Did you really wrench the oil filter on?

Either the video skipped a lot parts or he didn’t do a thorough job.

Pretty shitty job

top

to change brake oil you have also to blow it from brakes, not only from the tank

A couple things not shown were removing the bottom bolt on the manifold, detaching the harness clips from the manifold, and turning the crank to close the open valves. The video gets to the point, though. I cleaned mine by hand but I might try media blasting next time!

Really nice job!! Thank you for doing this video, valves came out really clean. please let me know the air gun blaster and the plastic adapted for the vacuum you are using . I recently clean mine but did it by hand and car runs like new but valves don't came out as the ones you did. Thanks and take care.

You had to remove the upper ball joint. Why did you skip that on the video?

Please make more vids these are soo awesome and inspirational

Not professional service avoid avoid avoid

nice video subscribed keep on

Mercedes has the tendency making it more plastic & more complicated for a simple thing.

Have you ever heard of someone having an injector problem after a walnut blasting?

Seems like no one does videos like this.