- 371
- 26 718 339
SJWCasting
Belgium
Приєднався 15 тра 2021
🔥Melting stuff in Belgium 🇧🇪 😏🔥
SJWCasting.com
Hello there! 👋🏻
I make video’s of melting materials. Materials like Aluminum, Brass, Copper, Zinc, Tin, Lead, Nordic Gold etc. and somethimes mixing them.
I started doing this after seeing lots and lots of videos on here.
After one year of deciding, I got myself a devil forge and started melting. What could possibly go wrong..😏
And I do not regret it at all! It’s very very fun to do😁.
Be sure to take a look at my Merch: sjwcasting-shop.fourthwall.com
email : sjwcasting@gmail.com
SJWCasting.com
Hello there! 👋🏻
I make video’s of melting materials. Materials like Aluminum, Brass, Copper, Zinc, Tin, Lead, Nordic Gold etc. and somethimes mixing them.
I started doing this after seeing lots and lots of videos on here.
After one year of deciding, I got myself a devil forge and started melting. What could possibly go wrong..😏
And I do not regret it at all! It’s very very fun to do😁.
Be sure to take a look at my Merch: sjwcasting-shop.fourthwall.com
email : sjwcasting@gmail.com
Spooky Brass Creations: Halloween Figures From Melted Metal #brass #devilforge
Join this channel and get access to special benefits:
ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap
This week I melted some copper, just a little bit because it was way to hot to melt 😅.
If you want more info, just ask 😉. You can ask me in the comments or send me a mail.
Become a member to gain acces to these perks:
ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin
⚠️So if you want to start melting metals, and want a cheap furnace to begin, take a look at the link.
And don’t forget to use the code for 5% off!!!
VEVOR 6kg Propane Melting Furnace: s.vevor.com/bfRcRd
Coupon code: VVPRO to save 5% off
⚠️ -Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
⚠️ -If you wonder where I get my crucibles from, check out Etsy : www.etsy.com/nl/shop/alfindingsltd
⚠️ MERCH: SJWCasting.com
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
-Creality HALOT-ONE RESIN PRINTER
Curing/washing station🔦🫧:
-Creality UW-01 Washing/Curing machine
Furnace🔥:
-Devil Forge 10KG Model
-Vevor 6KG Model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
**** I post a new video every month first Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap
This week I melted some copper, just a little bit because it was way to hot to melt 😅.
If you want more info, just ask 😉. You can ask me in the comments or send me a mail.
Become a member to gain acces to these perks:
ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin
⚠️So if you want to start melting metals, and want a cheap furnace to begin, take a look at the link.
And don’t forget to use the code for 5% off!!!
VEVOR 6kg Propane Melting Furnace: s.vevor.com/bfRcRd
Coupon code: VVPRO to save 5% off
⚠️ -Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
⚠️ -If you wonder where I get my crucibles from, check out Etsy : www.etsy.com/nl/shop/alfindingsltd
⚠️ MERCH: SJWCasting.com
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
-Creality HALOT-ONE RESIN PRINTER
Curing/washing station🔦🫧:
-Creality UW-01 Washing/Curing machine
Furnace🔥:
-Devil Forge 10KG Model
-Vevor 6KG Model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********** I hope you liked the video! **********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
**** I post a new video every month first Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
Переглядів: 740
Відео
Furnace Restoration: Restoring My Devil Forge (finally!)
Переглядів 7459 годин тому
Join this channel and get access to special benefits: ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin Hello everyone, @SJWCasting here!👋🏻 #metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap I finally redid the wool of my devil forge furnace. If you want more info, just ask 😉. You can ask me in the comments or send me a...
I broke the melting pot 🫣... #melting #lead
Переглядів 1 тис.Місяць тому
Join this channel and get access to special benefits: ua-cam.com/channels/WpgnKHp_voH50VTCTkljig.htmljoin Hello everyone, @SJWCasting here!👋🏻 #metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap This week I melted some copper, just a little bit because it was way to hot to melt 😅. If you want more info, just ask 😉. You can ...
Melting Copper Into Ingots #copper #scrapping #devilforge #melting
Переглядів 6 тис.2 місяці тому
Melting Copper Into Ingots #copper #scrapping #devilforge #melting
A bucket full of copper wire #devilforge #melting #strippingwire #copper
Переглядів 2002 місяці тому
A bucket full of copper wire #devilforge #melting #strippingwire #copper
So what’s going on? read description #melting #metalcasting #liquidmetal #copper #brass #aluminum
Переглядів 1579 місяців тому
So what’s going on? read description #melting #metalcasting #liquidmetal #copper #brass #aluminum
Fast Copper Melting Furnace #melting #metalcasting #belgium #copper
Переглядів 500Рік тому
Fast Copper Melting Furnace #melting #metalcasting #belgium #copper
It's To Hot To Melt.. #melting #metalcasting #belgium #devilforge #scrapping #aluminum
Переглядів 789Рік тому
It's To Hot To Melt.. #melting #metalcasting #belgium #devilforge #scrapping #aluminum
Why Do People Sandcast In Shorts!?! #brass #melting #metalcasting #devilforge #belgium #casting
Переглядів 660Рік тому
Why Do People Sandcast In Shorts!?! #brass #melting #metalcasting #devilforge #belgium #casting
SO YOU WANT TO START CASTING? #melting #belgium #metalcasting #devilforge #aluminum #scrapping
Переглядів 4,8 тис.Рік тому
SO YOU WANT TO START CASTING? #melting #belgium #metalcasting #devilforge #aluminum #scrapping
Got Some Nice Aluminum To Melt. #melting #scrapping #belgium #devilforge #aluminum
Переглядів 712Рік тому
Got Some Nice Aluminum To Melt. #melting #scrapping #belgium #devilforge #aluminum
Brass Scrap Melt #melting #belgium #metalcasting #devilforge #brass
Переглядів 496Рік тому
Brass Scrap Melt #melting #belgium #metalcasting #devilforge #brass
Crafting a Stunning Alloy: Mastering Aluminum Bronze Casting #copper #belgium #melting #bronze
Переглядів 668Рік тому
Crafting a Stunning Alloy: Mastering Aluminum Bronze Casting #copper #belgium #melting #bronze
VEVOR 🆚 DEVIL FORGE : WHICH IS BETTER⁉️ #belgium #copper #melting #metalcasting #vevor #devilforge
Переглядів 15 тис.Рік тому
VEVOR 🆚 DEVIL FORGE : WHICH IS BETTER⁉️ #belgium #copper #melting #metalcasting #vevor #devilforge
(4K) Casting Aluminum Bricks #melting #aluminum #devilforge #belgium #scrapping
Переглядів 518Рік тому
(4K) Casting Aluminum Bricks #melting #aluminum #devilforge #belgium #scrapping
Can I Get All The Copper Out Of This Slag? #copper #belgium #melting #casting #metals
Переглядів 6 тис.Рік тому
Can I Get All The Copper Out Of This Slag? #copper #belgium #melting #casting #metals
(4K) BRONZE, Can You Make It⁉️ #devilforge #copper #tin #metalcasting #belgium #melting
Переглядів 531Рік тому
(4K) BRONZE, Can You Make It⁉️ #devilforge #copper #tin #metalcasting #belgium #melting
Making Brass With Copper & Zinc. #devilforge #metalcasting #copper #zinc #belgium
Переглядів 7 тис.Рік тому
Making Brass With Copper & Zinc. #devilforge #metalcasting #copper #zinc #belgium
Check For Steel First! #fail #devilforge #metalcasting #melting #aluminum #belgium
Переглядів 870Рік тому
Check For Steel First! #fail #devilforge #metalcasting #melting #aluminum #belgium
(4K) VEVOR 6KG Melting Furnace, Is It Any Good?! #melting #copper #metalcasting #belgium
Переглядів 14 тис.Рік тому
(4K) VEVOR 6KG Melting Furnace, Is It Any Good?! #melting #copper #metalcasting #belgium
(4K) ♻️Recycling 9KG (20 lbs) Copper Wire #belgium #copper #scrapping #metals #wire #meltingcopper
Переглядів 1,1 тис.Рік тому
(4K) ♻️Recycling 9KG (20 lbs) Copper Wire #belgium #copper #scrapping #metals #wire #meltingcopper
(4K) ♻️Recycling 11KG. (24 lbs) Of Cans #devilforge #melting #aluminum #recycle #belgium #scrapping
Переглядів 2 тис.Рік тому
(4K) ♻️Recycling 11KG. (24 lbs) Of Cans #devilforge #melting #aluminum #recycle #belgium #scrapping
Metal Melting Madness: Lead-Coated Copper Wire Melt #devilforge #lead #melting #belgium
Переглядів 473Рік тому
Metal Melting Madness: Lead-Coated Copper Wire Melt #devilforge #lead #melting #belgium
From Waste to Wonder: Melting Mixed Dross/Slag into a Massive Ingot #copper #devilforge #belgium
Переглядів 478Рік тому
From Waste to Wonder: Melting Mixed Dross/Slag into a Massive Ingot #copper #devilforge #belgium
(4K) Watch This Aluminum Scaffold Piece Melt Like Butter #devilforge #aluminum #metalcasting
Переглядів 693Рік тому
(4K) Watch This Aluminum Scaffold Piece Melt Like Butter #devilforge #aluminum #metalcasting
(4K) DIY Shiny Brass Sphere Challenge: Can You Do Better Than Me? #devilforge #brass #melting
Переглядів 346Рік тому
(4K) DIY Shiny Brass Sphere Challenge: Can You Do Better Than Me? #devilforge #brass #melting
(4K) How to Turn Junk Pizza Pans into $$$ Aluminum Ingots! #metalcasting #aluminum #ingots #belgium
Переглядів 310Рік тому
(4K) How to Turn Junk Pizza Pans into $$$ Aluminum Ingots! #metalcasting #aluminum #ingots #belgium
From Liquid to Solid: Casting a Massive Brass Ingot from Scratch #devilforge #brass #belgium
Переглядів 645Рік тому
From Liquid to Solid: Casting a Massive Brass Ingot from Scratch #devilforge #brass #belgium
🔥Melting Copper Dust Fail 🔥#metalcasting #devilforge #copper #copperingotmold #ingot #belgium
Переглядів 385Рік тому
🔥Melting Copper Dust Fail 🔥#metalcasting #devilforge #copper #copperingotmold #ingot #belgium
Not his first time😂. Nice
Haha and not the last time 😂.
🔥
😃👍🏻
Nice pours!
Thanks buddy!!
Nice 👍
Thank you!!
Great Halloween melt thanks for sharing Happy Halloween
Thank you and thank you for watching buddy! Happy Halloween 🎃
@SJWCASTING you're welcome friend
Look'n good Bro!!! Time to get back to some content again how bout it??? Sure missed your melts. 🙂
Thanks brother!! Working on it 😁. I sure missed melting
Very nice, great pours
Thank you! Cheers!
I think it's going to go up soon!🎉
I think so too!😁
Very good!👍 came out great!🎉
Thank you! 😊
Great melt bro! Well done
Thanks bro!!
Whatcha makin'??? 🔥💯🤔🤔🤔
🫣😁
Bout time you put a new video out... 😎😎😎😎😎😎😅😅 Nice to see a new video!!!!
I know, i know😅. Sweet video’s about to come😁
Awesome nice job can't wait for next video
Thank you! I was pleasantly surprised with the sandcast of the next video 😁
@SJWCASTING you're welcome
How long did the original last?
I used it for about 3years.. I could use it for an other year or two. The wool was still in sort of good condition. I could’ve just put an layer of coating but I decided to use the wool I’ve had lying around for years😅.
Heck yea! Good as new!
Good to go an other 2-3years😂
I thought I had a hair on my monitor on the right side near the middle, just under the wooden box. I couldn't brush it off.
I never noticed that😅. Sorry for the confusion 🤣
@@SJWCASTING so you saw it too? Whew, thought it was just me.
@brianb.2398 😂
I like them. Stack them on their sides?
That’s a great idea!!!😃
Those tongs are failing you. Make some better ones.
These are great for smaller crucibles. But u do need to make me some longer and better ones🤔
Hell ya Brother!!!
😁
You should modify your porting tongs for a better fit so you can handle them better.
Oh I was planning on doing that. I have 3 different sizes but 4-5 different sizes of crucibles 🫣
Preheat your molds on top of the forge while you are melting the mettle.
I always preheat my molds
Forbidden licorice
😂
Nice work
Thank you!!
I'd like some suggestions. I want to melt some basic metals like copper, brass, aluminium, etc but i also wanna forge. I am deciding whether to buy a gas one ot an electric one. Gas seems to heat up faster and better but you need to get refractory cement for this one. Their prices are similar, but I'm leaning towards gas as electric seems to take a while to hear up. What are your thoughts?
In my honest opinion, go for the gas one. That will melt copper and brass waaaay quicker. An electric furnace is good, but when the coils are bust, you’ll need to replace them/buy new furnace. You can find refactory cement almost everywhere on the internet 😉. I have both but I always use my gas furnaces😅
@@SJWCASTINGWhat does the refractory cement actually do? Is it needed?
Refractory Cement is a heat-resistant material designed to line fireboxes and withstand very hot environments (2,000-3,000*F) such as firebox linings, forges, kilns, ovens, incinerators, crematoriums, and other high temperature equipment
@@SJWCASTING Alright thank you. Apparently they don't give out refractory cement anymore when they send it to you so I may not use it (It's hard to find online and expensive, also not super necessary) but I think I have to purchase a different regulator as gas bottles are different in Australia.
@FireTrye no problem. On Amazon you could find some. I use it so the fibers of the Kaowool don’t end up in my lungs😉. That way the isolation is protected and that the main reason I use it😉. That can be possible, but you can purchase that in every hardware store I think 😉.
I’m giving this video a thumbs down because instead of speaking, you wrote everything out so that people had to read it. trying to watch a video with a review not a video with a bunch of reading
So? That’s how I make my video’s.. Yeah, reading when you are looking at a screen is hard 🫣
Yo did you steal that? Also, is it easy?
No I never steal😅. These pipes where in the way, they needed to excavate the tunnel from one building to the other. All those pipes and cables needed to go😊
Stolen?
No, I’m not a thief😏. Building is being renovated and those pipes needed to be disposed.
That is quite a bit
Total was over 40pounds 😁
@@SJWCASTING sweet score
Oooh brother. When I saw the EU adapter I knew this was a bad idea
Yeah🫣😅. Well at least I know now🤣
< Liquid Metal Lab Furnace 😂
@@LiquidMetalLab 🤣
A coworker found out I did melts and asked if I ever did lead. I never had and after watching this I doubt that I ever will. Great video!
Lead is a fairly simple material to work with. You can cast some detailed pieces with it. But not with a melting pot 😅.
Lead is pretty easy to melt over a campfire. The issue is finding it, whatever industry could go away from lead has or is going away from it, at least where I live Fishihg wise the big heavy bottom feeder sinkers are sold in both lead and steel, it's just the small balls that you put directly on the line for float fishing. And you'd have to go diving in rivers where there are a lot of weeds, tree branches, rree roots and all kinds of... trash to put it lightly. My friend fished out a whole lamb's hide for example Pipes are PVC and have been for a while so old lead pipes are hard to find Wheel weights are pretty much all steel so you can't bring home a bucket of lead from the mechanic. You can bring home a bucket of weights but good luck fishing out a decent amount of lead, if any So far guns are pretty much the only industry where lead would be easy to come by from ranges. Would be, if I didn't live in a hellhole LARPing a country
A lot of old big buildings here still have the lead plumbing in it (not in use). A lot of places where you can fish, they banned lead fishing weights (so i was told). Lead from mechanic.., yeah they take it to the scrapyard themselves 😅. So I’m glad I can do a lot of demolition jobs in old buildings. Those jobs have given me my whole stack😅. Well almost my whole stack..
Hey😮 You're back in action!
👋🏻😁
What exactly is the point of that adapter?
Apparently nothing 😅
Would preheating the molds help? And sorry about your melting pot, that's a real bummer.
I’m not sure. I think I couldn’t get the lead hot enough to flow through good enough. That’s ok, I’ll figure something out 😉
i did this with the first ever soldering iron i bought as a teenager from the usa to here in ireland ,plugged it in with a plug adapter with no idea about the different voltage ,shit went white hot before throwing glowing ceramic peieces on my carpet haha
Oh wow, as long it only got on the carpet 🤣.
very funny video!
if you heat your mold red hot before pouring it comes out much nicer
I tried that once but it didn’t work 😅
Hangs sign out "Gone Fishing" Good pour bro. Time to go fishing. 🎣🎣🎣🎣🎣
I have only gone fishing once and never again🤣. Thanks brother!!
Heck yea! Well done
Thanks buddy
WoooW BrO NyC Meeting
Thank you
heating molds is OVER RATED .. I heat mine just enough to remove moisture ... then let them sit 60 seconds to even out the temp ... that along with my vibrating base make a perfect copper pour every time ... silver too ... (I will add they MUST be moisture free or bad things happen) ... but moisture free doesnt nesc mean hot
As long if you get the moisture out, that’s fine😉. But I was struggling with the many holes in the ingots.. so I was trying different stuff. Where you got the vibrating plate from? I’m looking to get/make something like that.
Didn't know it was 110v but it says, clear as day right on the plate that's holding the melting pot "120v"😂😂😂😂
I was too excited to read that😅
@@SJWCASTINGthis is a weird reason to subscribe to your channel but it feels like the right move
Thanks?😅
Damn, cant wait to smash that "Do not recommend this channel button" again for the 9th time today.
🤣
Oh no! Any chance at fixing it? Is there a fuse you can replace?
I’m not sure but I don’t think so, I saw the spark coming out so it’s fried😅.
Be carefui if it only takes 110/120V cause many eu plugs are 220/230V
Yeah, too late 😔
@@SJWCASTING oh nuh
I just finished processing about 30 lbs of range lead. I have a similar idea of casting something...lol
Make blocks, it’s way easier 😂🤣
Awesome! If I had a supply of lead, I'd totally do this. 😂
Still haven’t found any lead?😅
@SJWCASTING no, but I also haven't looked very hard. I might just buy some.
@KrakenCasting 🤣. That’s a possibility 😃
@KrskenCasting, find a local range and collect spent bullets. You will have some processing to do, but that lead is about the purest once you are finished.
@@donl4914 I haven't been to a range in years. I lost all my guns in a boating accident, you see. 🤣