Відео

I know right..

Do not install drip edge like this. It’ll cause more damage than not having a drip edge at all.

Won’t the water go through the screws you put in drip edge ? Don’t you need to seal around the screws ?

Call the roofer and have him return and do it right. (good luck with that).

I was hoping to learn something but when the installer doesn’t even know the proper name of the things he’s working with something ain’t right

This guy is trying to spread pain in the world.

I agree. I was very disappointed

This dude knows nothing. It’s crazy. Calls the rake or gable a “peak”. I have never seen anyone ever screw the drip edge to the fascia, because it’s a big no no. How many people have done this because of this knuckle head?

Never face screw or nail gutter flashing, you dont want your flashing touching the fascia board, ther should be a 1/4 inch gap or a pinky gap between the flashing in the fascia

Bruh, take this video down, so many problems...

This is incorrect. Drip edge should not be against the fascia. The water will drip off the edge and still catch on the fascia board, rotting it. You should have put a screw through the shingle up top and then bent the drip edge out away from the fascia board.

I literally just have to give this a thumbs up so I can show from friends tomorrow 🤣🤣🤣 Video proof of a hack

Is this parody? From the struggle to install to installing the wrong size, there's no way this was serious.

1. Drip edge does go on all slopes of the home and especially cornering ends, rain comes down from all directions. 2. You do not want to penetrate the fascia with any kind of screws or nails, it'll just allow another access point for water to seep into over time. 3. Use some type of silicone if you do it this way.

Excellent video !!! Straight forward and concise !!!

LOL! Please don't install your drip edge like that...now you have holes in your fascia board...install from top on the nail flange.

Holy shit. This is worse than no drip edge. What the hell do you think is going to happen with every screw hole?? Leaks and rot!

Wow, you really messed this thing up. Delete this video before you screw up a bunch of peoples facia.

If you want your facia board to ROT- follow this guys advice.

It's been 30 years since I roofed and then I was putting on metal roofs but our roof got damaged here in Florida from hurricane Ian and fellas that help me strip and reshingle our roof when installing the drip edge on the fascia side a lot of the drip edges sticking out and it's not up flush and where the overlap is it's not very flush either so I was wondering if there was a way to fix that because I didn't think you were supposed to put nails screws basically any holes through your drip edge, fascia, into the wood

You don’t need to install flashing on the side I’ve been doing roofing for nearly 50 years always do it on the perimeter of the whole house

Yeah, try this on a less than one and 12 flat roof

Comments are just a roast session 😂

Not trying to be mean or anything, but nothing said in this video is correct. If you're watching, find another video.

this is a great video in how to NOT install drip edge

That’s wrong!

No no no no no

So many errors in this video

Wtf? Jajajaj

Good example of “How Not To Install Drip Edge”!

No, no and no! And yes, you do use rake edge up the sides of the house

What you are saying is the drip edge flashing can be installed after the roof is finished? Would the gutter then follow the flashing? Thanks, Grant from Ontario, Canada

Water with or without wind follows the path of least resistance! Drip edge on the rake is essential cause nobody really knows what route water will take! Wind direction is a consideration too!

He doesn't show how to cover up the nails with sealant... aren't you not supposed to drill the drip edge into the fascia?

Isn't code for the flashing to come off like 1/2 inch and not touch the fascia...?

Wrong 😑

Rotten example picture had this same drip flashing.

Wrong drip edge goes on gavels gutter apron on flat surface

Oh No!!! 🙈 I can’t watch. Sorry UA-cam folks but don’t do it like this. Not Never!!! …..Johnny bombing it!!!

Wow! Thank you. I wish i would have found thsi sooner to prevent costly fascia repair n replace.

This is great advice!... but many do not understand that there is such a thing called “shingle molding “ and that’s what he’s installing the flashing onto...I would love to see more videos with houses that have traditional “shingle molding “...and now there is the option of pvc (as shingle molding) so the pvc wouldn’t rot...but yeah, the metal flashing can be installed from the top of the “shingle molding “... and tar around the nail... and if the metal is custom bent to fit the shingle molding the water rolls right off the flashing. Great videos!....I would really like to see more of this type of fascia and rake boards that have the traditional shingle molding 😎👌👍

WARNING: do NOT install your drip edge like this!

For a low slope patio cover, (.5" per foot) what is the best method for adhering fiber reinforce rolled roofing to the drip edge. The mastic I used previously let loose after a number of years, causing rain water to wick back and then under the drip edge. I'm not sure the polyurethane I purchase will adhere any better to the tar shingle roll roofing material.

And you just ruined the peice of drip edge...plz guys dont follow these instructions..you need to put the nail/screw in the top under the shingles with some bull under and over

This video sucks.

uhhhh, no no no. Just no. Go to the manufacturer's website and learn how to do it correctly.

I would delete this video but again. I hope you learn from the comments ! Haha

From your video, heavy rain come down through the drip edge and flush over the fascia broads and will damage very soon. My house is 37 years old; the drip edge has 0.75" wood spaced from the fascia broads. Now I have to replace all fascia broads some days.

Where did you find a matching color for the lady customers?

This guy must have learned how to drip edge from my brother-in-law.