Відео

I’m not sure the ph level of the acidic. If I can find that out I’ll get back to you!

@@Bull1the1Great that’s a great use for a rinseless wash!

@@Bull1the1Great don’t do it! Idrosave is like a wash & coat. Preludio will work with any rinseless.

@@seabrew1 yeah it does!

@@miscellaneous5215 thanks so much!

@@1stfrompuertorico568 thanks so much!

@@Ecdetails thanks so much man!

hey man, do you think Preludio Acidic would be effective for road salt clogging in the winter? I asked on Labo's UA-cam channel but apparently they don't respond to comments. Normally I would use DIY WSR periodically, but I don't always want to have to use a hose to rinse it off in the winter.

@@jeffc6832 Ya it will be , it almost as good as purifica in terms of bringing a coating back and removing minerals just play with the dilutions

@@jeffc6832 yeah dude absolutely. Like EC said, it’s like their acidic shampoo but doesn’t have to be rinsed after.

@@Ecdetails thanks bro

@@1stfrompuertorico568 thank you!

@@Arnerse appreciate the kind words. For your headlights, if you want something quick you can use a wool or microfiber pad with a cutting compound and then finish with a foam polishing pad and polish and they will look a ton better. If you want to go a step further you could do 1500, 2k, 3k wet sand and re spray with 2k clear coat. There are a lot of videos on that process. As far as how long this detail takes me, it is a 2 day job because of pulling those ads. If I didn’t pull the seats it would be a one day job. Hope that helps!

@@atouchofhutchad i love that you reply to 4 yr old videos! I will have to look into that process, I’m a bit wary as I don’t want to worsen them. But they could use a refresh, sitting at 146k it’s the worst looking thing on the car. What did you perform in this video? The sandpaper way it sounded like! Right on I’ve never removed seats during a detail or had the convenience of a steamer but you made quick attentive work. If you could pick an item or two that made your job much easier what would they be and why?

@@Arnerse in this video I just did a compound and polish and honestly, it shouldn’t hurt yours, I wouldn’t be afraid to try it. As far as my process goes, I’ve changed a lot since then lol. If you’re trying to do the same with your vehicle I would look into the P&S 3 step carpet system or the Labocosmetica 2 step system. I don’t use APC on fabrics anymore, it can just cause issue down the line.

Sorry, I’m not sure what part you’re talking about.

Maybe kenda a cheap china tire brand

@@hyde4never that’s a good question. Maybe a good question for Spotless Systems. I use mine often so I don’t run into that problem. I suppose you could tear it down each time and get as much water out as possible or run it once a week. I think the only real concern would be mold so as long as that didn’t form you would probably be ok. I really hoped this helped. But really, reach out to Spotless Systems, they are very helpful.

Good idea!

@@PURAMAMii crspotless.com/products/rc2-20-replacement-cartridge

ua-cam.com/video/31D2FR3Ur1Q/v-deo.htmlsi=HqcaweZCHpXnbj5w

Or watch so you can see how the unit goes together👍🏻

@@2StallGarage thank you!

Let’s hope it doesn’t come to that lol

I think they still are made for this Jeep! I’m excited to get them soon. Hope you like yours!

@@atouchofhutchad had them since 2016 and no issues. Did require an alignment.

Sorry I’m not sure what rear differential it is, I just grabbed one from the local junkyard off the same year Liberty

@@williammunozlacruz3397 🤣🤣🤣 thanks for watching! Gracias por ver!

www.roughcountry.com/product/jeep-suspension-lift-kit-68731?C&C%7Cm%7C%7Cname_first_68731-a&gad_source=1&gbraid=0AAAAAD83JzpSajkuEVW7r_seS6nMqrz8-&gclid=Cj0KCQjwwO20BhCJARIsAAnTIVTMfgnvdwX_MhtxAU8trEq4yeRuBxvNWPL1J91mkGZe3F4-EeIW5dwaAshNEALw_wcB I’m having a hard time finding the original kit I purchased but this is basically it just for newer models. There should be other brands that make them as well. Hope that helps!

@@MrNewff I bet it looks nice! It’s a lot of work.

@@Bruces-Garage thanks Bruce!

It’s all double sided tape and body clips except for the bumpers

I have Gyeon quickview on all the glass and use Gyeon Glass+ as maintenance. I could make a video on those if you’d like!

Thank you! I love seeing that water behavior before and after a wash.

Thank you too!

Introducing DIY Tuber for small content creators! ua-cam.com/video/HBtHFxrWFHg/v-deo.html

@@diydetailofficial applied today!

I see exactly what you mean and I honestly can’t tell you the mechanics of it. I guess as the water goes into the inlet side and when you have your Y-splitter set to filter or not it will just force it into the pressure washer. Mine works well and I hope yours does too!

It was worth it for me to pay the extra to get something I knew would work because I’m not sure of my ability to put one together lol but by all means- if you have the ability to build one, I’d say go for it!

The gun I purchased from Amazon, I would recommend getting something better like MTM or active. The foam cannon is MJJC and the hose is an Uberflex 50ft

Thank you too!

Instructions say anywhere from 13-30 depending on application method. I didn’t think 1 oz was too much for 1000 ml and I’ve had good results as you can see

Dude thanks so much!

Appreciate the great tips! For me, the TDS meter is so handy to have to know I have clean water coming through my pressure washer, even though your suggestion of a rinse hose is a great idea too!

You can do it!💪🏻

Right back at ya!

🤣 keeps it organic! Thanks for watching!

Dude, thank you so much! I appreciate the kind words and so glad my vids are helping you. I hope your project goes well, keep us updated!

That was part of it but not the main reason. It was a good idea to cover the rust and it just so happens that my dad had all the tools, equipment and knowledge to do it. I also don’t plan on being gentle with this Jeep so it was for that too lol

What pressure did you set your compressor at when spraying?

@@chrisblock-mg7dd I can’t remember but I’m sure each bed liner manufacturer will have their recommended psi