- 3
- 3 889
Michael Charles
Приєднався 7 лют 2014
Creality K2 Plus Startup, Printing and a Few issues (Part 2)
Hey everyone,
This video is meant to showcase some prints and address a few issues with the printer that will be resolved in due time. Overall, I’m really satisfied with the performance of this solid 3D printer!
I appreciate all your feedback, whether it's positive or constructive. I’m not a professional reviewer like the many esteemed ones out there whom I greatly respect. This journey is a learning curve for me, and I plan to share both the successes and challenges with you, along with the solutions I discover.
My goal with this video is to provide an honest overview of the printer and its capabilities as I experience them. Apologies if it didn’t meet some of your expectations. Thank you all for watching and sticking with me on this adventure.
Cheers
This video is meant to showcase some prints and address a few issues with the printer that will be resolved in due time. Overall, I’m really satisfied with the performance of this solid 3D printer!
I appreciate all your feedback, whether it's positive or constructive. I’m not a professional reviewer like the many esteemed ones out there whom I greatly respect. This journey is a learning curve for me, and I plan to share both the successes and challenges with you, along with the solutions I discover.
My goal with this video is to provide an honest overview of the printer and its capabilities as I experience them. Apologies if it didn’t meet some of your expectations. Thank you all for watching and sticking with me on this adventure.
Cheers
Переглядів: 246
Відео
Creality K2 Plus Unboxing and Setup (Part 1)
Переглядів 2,2 тис.7 годин тому
So this video is the Official unboxing of the Creality K2 Plus. To all viewers, I understand that some of you may not like my video, and I appreciate all your comments, even the critical ones. Unfortunately, I broke my LED ring light, which is why the brightness is off. I wanted to get this video out quickly because many people requested an unboxing. I tried my best but didn’t have much time to...
Creality K2 Plus Teaser. (Full Unboxing and setup video coming soon) Stay Tuned
Переглядів 1,8 тис.9 годин тому
This is just a short video if the K2P in action. More videos to come soon
Then how did you get an early release of the K2?
Thank you for the videos, and also that you speak about the problems you found and showing detailed print quality. I should get my K2 Plus next month, so nice to know if it is good or not.
Mike. Landscape mode bro.
Thanks! Been looking forward to this part two video...
Thanks for the videos and your work. I think you spend hours for that. Great job. Regards from Austria /Europe
You're great, just keep it up and ignore the haters
Much thanks for your feedback :) Really do appreciate it
So far your videos seem fine, just a dude spreading the good news about the hottest new printer. Keep up the good work man!
Thank you so much for your positive feedback. Really appreciate it
Michael - no need to waste your time listening to miserable/ negative keyboard warriors, you keep doing you! Thank you for the video, I appreciate the time that you took with both of these videos.
Thank you so much for your positive feedback. Much appreciated
Thank you for sharing
Thanks for watching!
Did you have to pay import tax on it?
@@princeclucks5843 I paid taxes of Canada and Quebec, that's it
Sooo does this mean no more content embargo?
@@Nowen97 I am a consumer and confirmed with the right people. Embargo does not apply to me.
damn I'm already a bit jealous
Don't be. You'll get yours eventually. Thaks for the comment and happy printing
Thank you :)
You're welcome!
Thanks for doing a full video!
@@lornelorne5727 you welcome. Appreciate your input
Only 15 minutes in but really enjoying the video. You have a really easy demeanour whilst talking to the camera 👍
Very good in depth unboxing video. Really impressed with how well packaged it was. I must say though I always thought the 'free' rolls of filament were not full rolls.
Really do appreciate your feedback . Thanks for the compliment. :)
Glad you enjoyed it
OMG thanks for sharing with us, subscribed and wating for part two.
Will post one soon even though the trolls and negative people on here. Thanks for your positve feedback. Cheers
Thanks for yout time!
My pleasure! Much appreciated
Appreciate the video. Cant wait to see more!
More to come! Thank you
Thx a lot greetings from Austria/Europe
You welcome. Will be posting more soon. Subscribe to follow :)
To all viewers, I understand that some of you may not like my video and I appreciate and will not get mad of the bad comments, I unfortunately broke my Led ring light which is the reason for the brightness and wanted to simply get the video out there because I was asked by alot of people to do an unboxing and I tried my best and did not spend alot of time on editing so I did not fix the exposure. Please forgive me about that. I also had a video card failure during putting the video together so I did what I could with whatever I had to get it out there. I am not a professional reviewer like many trusted reviewers out there of whom I have alot of respect and admiration for. I simply put this video together to give an idea of the printer. Sorry if it upset some people. Cheers
The spool holder so you can use TPU, great video I got 40% US coming in November
I figured that much :)
You should have waited and not be the first one to make a review video. This was a waited of my time
It was not a review. I am sorry that you wasted your time. Although I appreciate your negative feedback, others did appreciated seeing it unboxed. Cheers
You`re just a troll! Start being more grateful, im sure you waste your time everyday, so thats not news for you!
Stupid comment. The video was exactly what it said it was - an unboxing video. Being unable to read you managed to waste your own time I would say.
It would be awesome to see the CFS on top of the K1 and K1 Max!
Will put in on top the K1 Max tomorrow just for giggles. It will be in the next video so keep an eye out
Still waiting on my printer. I was lucky enough to grab a 50% off unit. I agree that full spools would have been a nice bonus. Thanks for the video!
You'll get yours soon and you'll be impressed as well :)
They for sure from the start said half spools of filament. I can’t wait for mine to ship now. Good video.
Yes I may have missed that part about the spools but it sould have been nice to get full spools seeing that there was a delay along with the 10%.
Thabks for the video. More lighting would be a big help when trying to do an unboxing
My Led Lamp fell and broke just before the ideo but I did what I could with what I had :)
Good ol Q-bexk.
Yess good old Québec
Ty for upload waiting for part two
Hopefully I should get the table fixed tonight so I can do some more testing and record some more by tomorrow. Thanks for following. Subscribe for more updates
When is part 2 gonna be out?
Working on it now. Fixing the table lol
@michaelcharles2224 awesome! Thank you for the video great setup!
Pleasure. Thanks for following. Hopefully you subsribed :)
@@michaelcharles2224 i did :)
Does Creality own Govee?
Some people say they are affiliated but I don't know for sure. Sorry I can't give a concreet answer :(
@@jsmitty2333wf at the minimum they share a factory
the filament rolls were as advertised on the site 4x quarter rolls :)
I may have missed it then. My apologies. However with the delays that occured, they should have given everyone full spools. You don't agree?
@@michaelcharles2224 I suppose so, but they did offer 10% off for life which I'm cool with personally 🙏
They all seem to be the new plastic spools (probably with RFID tags), not the "old cardboard spools" that I think were mentioned.
@@dropbear9785 their advertising photos always showed plastic, but it does work with both
@@dropbear9785 The 4 that were sent are with the RFID tags and the free one was with the Cardboard. However, the white spool with RFID tag worked once at the first start up and now it's not detected in any slot that I put it in which sucks
Thanks for the video! Subscribed
You welcome. Please share for others to see :)
Dying rn seeing the early bird discount went to 50% off!!!!
Those VFAs are even worse than on the K1. Hooooly shit
Well the Table I have it on is not Solid which I will fix. The printer is new and no calibrations has been done whatsoever therefore it is a learning curve and I hide nothing whatsoever so it may be an issue or it just may be that it needs calibrations or..... We'll find out together!!! Stay tuned
What's the main selling point of the K2 over the K1?
Size and Multicolour Printing. 350X350X350. Also it's alot quieter and a little faster.
@@michaelcharles2224 thank you 🙏
Creality is shit, as simple as that. You creality team can't fool people
@@elude3808 well if that is how you feel then you're allowed your opinion. I am not affiliated in anyway with Creality. I am a consumer that rathers Creality products over other brands. Cheers
You say that the benchy came out all right, but it looks like the top of the blue part is weird on the right side. Those waves on the poop chute are a bit disappointing too. Fingers crossed, I'll get my hands on mine before XMass (Europe warehouse), but I really hope I made the right move selling one of my brand new X1Cs still in the box to fund the K2Plus... Not fully convinced yet.
@@emmanuelseyssens7379 the top of the blue does have a little waves but as long as I said, it's the first print ever. The machine is not calibrated in any which way either. Also the Table was moving because of one of the feet. I do not know the cause just yet but will figure it out
@@michaelcharles2224 Thanks for the feedback. I'll watch your content closelly as I'm dying waiting for my K2, which will come late november hopefully.
Meanwhile reviewers who have had the printer for longer and have had time to dial in settings for higher quality prints can't post anything until Nov 11th (Oct 25th for shorts). Hope to see more, and hope to see any troubleshooting and tinkering that may be required from you and everyone not under embargo currently.
@@stipuledfatcat yes it's unfortunate for the reviewers at the moment but I am also looking forward to seeing what they will have online. I am just doing test for now and then eventually I will start the calibrations.
Cant wait to receive mine....
@@3DDimensions you'll receive it soon enough and you will be happy
Did you change settings again after said on the creality logo or did you misclick? You said base white edge black and logo red. Came out with a black logo. 😅
I did put in the video, Correction lol. I changed it after and forgot to say it in the video lol.
@michaelcharles2224 looks better this way to me. Lol. Glad see them in people's hands. I got to still wait a few weeks. Mine isn't getting to me until Nov 15th
@@cliffgardner5717 Will be uploading the unboxing Videos soon
@michaelcharles2224 ill be watching for it. Lol. 👍🏻