Відео

No the one in the video could be Nylon CF or ASA CF. Don’t remember 😄 I don’t really print fuzzy skin. The CF in the filament does a good job hiding the layer lines

Yes 100%, I did speak to Omran about it but don’t think we will ever see one?! Yes they are. Busy making a new gantry to fit the motors with 30T pulleys 😄👍🏻

Thank you very much :-)

Very very cool! Love videos like that :-) Thanks!

Have a look at the other videos after this one. So even faster speed printes 👍🏻

Thanks. Im still working on the docs. So it will go online soon.

Thank you very much for your feedback! Are you in the US? Tasking so that I can look for something similar and update the BOM. Gut do it 😀👍🏻 I love remixing as I do it all the time. Have a look on the mammoth-3D GitHub all the CAD files are online 🤩

That's awesome!

Thank you very much!!

That is awesome! Do you use the Fish Filter? Or magic cleaning pads?

this is very scare, my cat is sad

@@grahamcracker659 Are you in the US? I will check with Eheim to see what the problem is, that it is so hard to find?

That's cool! I will never use CPAP without the muffler again :-) www.printables.com/model/935635-mammoth-3d-cpap-muffler-version-135

@@mammoth-3D thats for sure ! Dont wanna get deaf 😅 Just i would need a evem better muffler with more silencing (will try developp that then i guess) as its not in a seperate room.. Thank you for the awesome work you already did thats already a huge inprovement in noise

@@3DWolfEngineering Yes I understand. Well it's just the first step to show what can be done. The more people that work on it the better ;-)

Thank you very much :-)

That's awesome! Maybe you could upload a photo on www.printables.com/model/926983-mammoth-3d-cube/comments So I also get to see it ;-)

Moving the Z Belt to the outside is not new?? It's very new to me and I would say im the first to do so. Or did you see something like this before? Do you have a GitHub link? Thanks

Happy to hear you like it 🙂

I wish I had more time to make more Videos. But the CPAP Mammoth Muffler will be uploaded soon ;-)

Awesome!!! Thanks for your support!!

Thank you very much :-)

Thank you very much!!

Thank you very much!! Didn't think it would all change like this. But im very happy it did. ;-)

@@mammoth-3D 💯yeah thats awesome

@@3DWolfEngineering very awesome :-)

Yes I use water cooling for the steppers, hotted and 5160 Pro drivers

Hi, could you share info about the extruder, hotend and liquid cooling setups? Thanks!

If I would know what that means 🤣🤣🤣

We are still Pre Alpha version. So not ready to get mounted. We got some good feedback today about the motor mount. Hier is a new link: discord.gg/3wdFDvqv

@@mammoth-3Dthat works, thank you

@@measureonceprinttwice Awesome :-)

discord.gg/3wdFDvqv

Thanks buddy. Happy you like it 🙂

whahahaha Yes I did in this print. But it's not for the first layer. It is that the ASA doesn't bond with the PEI Sheet. What I learned over the years. Get a good PEI sheet and stick with on brand, so you know what it can do and what not. The right tool for the job. I tested klicky, BD-sensor, ..... but the best and always consistent is the Beacon probe, not the CN version.

Sorry never gave you feedback about the adhesive I use. Any water based glue stick will do the job. In the US you can find lots. But in Europe hard to find, so im using bamboo lab glue stick.

Thank you :-)

Thanks for the Info. Will look into it. I found this dangerklipper.io/Danger_Features.html any other good videos or web sites that I could look at? Or is there only the github?

@@mammoth-3D There's also the Armchair Heavy Industries (formerly Armchair Engineering) D**c*rd where lots of devs and users hang out and can help.

@@daliasprints9798 thank you very much for your feedback. Will check it out.

Look super power motors are awesome. That is what im running in my other videos. Kraken has twice the amount of Torque. So the toolhead doesn't always have to be super super light to get better acc. Speed I will have to test and see what I can get.

More torque means a lower top speed right? ​@@mammoth-3D

@@woutervossebeld4664 Yes that is right. But if you use 30T pulleys with the motors. You have more torque then a super power loo and more speed 🙂

Are you based in the EU? I only know one shop in the EU that has some in stock.

@@mammoth-3D I am not based in the EU unfortunately. Hopefully they will become more widely available soon!

@@MagTheFrag I spoke to D3vil Design and they told me you can look at this shops. Wattskraken.xyz PeeDee3D.com Meltbro.com D3vilDesign store @ Aliexpress

Whahahaha yes that is so true! You should see the table it’s standing on. Things start falling off from all the shaking :-) I should make a video of that one day.

Doesn't help that it's doing the Voron thing of leaving out 1/4 of the top frame that would have provided a lot more rigidity...

@@daliasprints9798 Maybe im just misunderstanding about the frame. But this is a 300x300 Voron 2.4

@@mammoth-3D I mean how Vorons don't have a full cube frame but leave out an edge at the top front. It detracts a lot from rigidity and AFAICT it's just a "form over function" thing.

​​@@daliasprints9798er. Not sure why this one doesn't. But mine definitely does. Heh. Pretty sure it's just out of frame

Thank you very much! I never looked into it. Vz has a fixed gantry and im using a floating gantry. What part do you like. Maybe I can make something new?!

@@mammoth-3D I didn't even register it as floaing gantry - I just thought "that's a really low z height" 😆 In general I'm interested in better ways for tensioning and double shear that fit my Vz330. I know they're working on a double shear design but dunno when that will be released.

@@MrJofArnold Yes I just love floating gantry 🙂 Do you have a link to the double shear that fit my Vz330? If never hear about it. Sorry

@@mammoth-3D They've mentioned it a couple of times in the discord that they are working on it, but no more info than that I'm afraid

@@MrJofArnold It could also just mean that they will put two pulleys on one shaft?! Hard to tell. I do the same. Just to safe space. We will see what will come out at the end. Yes the belt tensioning system I made was, I don't need to loosen motor mounts and I don't tension directly on the motor shaft! And that is how the mammoth gantry was made. :-)

Hello, I think you had a look at this link? www.amazon.de/Eheim-2617080-Filterpatronen-für-Pickup/dp/B0014FKK9G It's 100% not 10x10x10mm!!! If you go down on the link you will see Product Dimensions ‎6 x 12 x 8 cm; 30 g You can look for the CN version. But the Eheim is the one I use in my mufflers on all my printers.

for know :-) As the gantry is new and also to show that you could fit the vz toolhead on the printer. But it will only be a true mammoth if the mammoth toolhead is on it ;-)

whahaha the test was to print a fast bench and not to blow it of the bed 🙂

Yes 100%. Im printing @1000mm/s so will have to test a bis to get the right cap flow. ;-)

@mammoth-3D do you have a github with your designs? I love your cpap set up.

@@TheMostH8D github.com/Mammoth-3D/Mammoth-FDM-MODs?tab=readme-ov-file The new Gantry will be online soon, and the toolhead that is on the printer in this video is a VZBOT Toolhead. So just google it.

@mammoth-3D I wanted to do that gantry set up but decided to go with a vz extruder and lsd on an archetype toolhead with 9mm belts and awd. Your set up is super clean.

@@TheMostH8D that setup will work good as well. Just check that your gantry doesn't get super heavy with all the bearings for 9mm. I don't think we need 9mm belts. I tested this printer at 1000mm/s 50k acc no problem.

It's 100% the way to go. Easy to update if you need to.

Hey. It will go into the muffler. If you need more help. Mail me info@mammoth-3d.ch

Auf ein TAP toolhead würde ich kein beacon montieren. Aber es sollte auf die normalen Mammoth Toolheads passen. Ich bekomme die neuen beacon v2 jetzt bald. Dann werde ich die cad files updaten. Und bin dabei eine neue lede zu testen 😁👍🏼 facebook.com/groups/ratrig3dprintercommunity/permalink/1272197673587545/

github.com/Mammoth-3D/Mammoth-FDM-MODs/tree/main/Mammoth%20CPAP%20Muffler

Happy printing 😁👍🏼

I did not test big nozzles. But 0.5mm I get 35mm/2 no problem.

Yes I do. Will upload some soon.

No with the muffler it really not that loud!

github.com/Mammoth-3D/Mammoth-FDM-MODs/tree/main/Mammoth%20CPAP%20Muffler

I don't understand 🙂

Im very happy to hear you like it. 😁 Let me know how it’s going. All the CAD files are online. So you should be good to start. Im also thinking about a carbon filter in V2. So you don’t need a separate one. What do you think?

@@mammoth-3D I'd be thrilled to see a carbon filter in V2. Maybe it's possible to print a cylinder shaped double walled design to plug onto the inlet in the chamber.

@@stefanluckmann1842 will see what I can do. 👍🏼

Is that a stock panel? And cut to Voron spec’s? Sorry to hear that. Please give me more info.

I don’t use Can Bus or TAP, but that is what users are looking for. And yes it’s based off the VzBot. But to fit a Voron, as the VzBot Toolhead doesn’t really fit on the Vorons. If you are looking for a Voron Toolhead you can find it on my GitHub github.com/Mammoth-3D/Mammoth-FDM-MODs

All my work is published. But I would use the normal MGN9 or MGN12 version. The TAP version has to much vibration in it. github.com/Mammoth-3D/Mammoth-FDM-MODs

Im doing it as a Hobby and im not part of the Voron Team. So I can only work on it when I have time off from my job, family and other projects. But you can asked me anytime if you need help or support. And yes its on my todo list to finish it. Did you look at the CAD file? All the screws should be in the CAD file.

are your deisgn available for the public? Also the mammoth toolhead design@@mammoth-3D

@@user-gp2it1wu1k yes they are. 🙂 github.com/mammoth-3D/Mammoth-FDM-MODs/tree/main