Відео

Hesalit

Thank you for watching. It's not acrylic. It's mineral glass.

no

Sorry for the late reply. I got it from a Japanese auction site. It seems to be sold on the internet at AliExpress and other places.

Gracias por su comentario. Este modelo tiene una caja 2 mm más pequeña que el SBTR.

@@LEOLEOROCKWatch por lo que tengo entendido, el sbtr017 trae el 8t63, hay mucha diferencia con el 6t63? Gracias por responder y por subir el video!

No hay diferencia en la operatividad. Si hay diferencia es en la precisión. 8t63. Diferencia media mensual ±15 segundos (cuando se lleva en la muñeca a temperaturas entre 5°C y 35°C). 6t63. Diferencia media mensual ± 20 segundos (cuando se lleva en la muñeca a temperaturas entre 5°C y 35°C).

@@LEOLEOROCKWatch gracias!!!

Thanks for watching.

Lug to lug is approximately 48 mm.

Thanks for watching. I have a number of Swatch watches that stopped working too. This is still the only way to get a professional to fix them, as it is difficult to take out the internals by myself, but it is certainly hard to find a place that can fix them.

Sorry for the late reply. I don't have a video right now, but you use the in-dial at 9 o'clock to correct the time difference. I think you would adjust it according to the time difference between your area and Tokyo (-20 hours to +4 hours). To operate, first press the small button (A button) at the 8 o'clock position for 4 seconds and release it. When the second hand stops, you are in the time zone setting mode, so use the A button at 8 o'clock and the B button at 10 o'clock to set the time difference. You can now set the time zone, but I believe this movement will not function to receive radio waves if you set the time zone to a region other than Tokyo. Unfortunately, I do not know about those sold overseas.

@@LEOLEOROCKWatch no problem, I found out my watch didn’t work with radio wave control in US

Este modelo lo he visto desde 2008 aproximadamente. No sé en qué año salió a la venta, pero creo que se fabricó hasta 2016 aproximadamente. Sentimos que no sea exacto.

Usually it runs as soon as I replace it with a new battery. If you replace the battery in the correct position, there is no need to put it in the light and wait for it to recharge. I have done a number of battery replacements of this type and they start working the moment they are replaced. I think there is a small protrusion, is it in the correct contact position? I suggest you check again.

@LEOLEOROCKWatch thanks for the quick response. Just opened it up again and tried a brand new rechargeable battery and still nothing. Checked position and all contacts are proper. Went outside and put it direct sunlight for a few minutes and died as soon as I walked inside. BTW, I did the proper reset, so I've done all possible from what I've read. Any other suggestions?

@@mex3000cf I see. I had one watch that did not work even after replacing the battery. Since it did not work even after replacing it with a battery that works in other watches, this must be considered a malfunction that cannot be dealt with by an individual, since the cause is not a battery problem. I think the only way is to request the manufacturer to repair it. We have to get an estimate and consider whether we should repair the watch.

Thank you for your comments. Does resetting the stopwatch cause the hands to shift? How many watches do you have in the entire series? 8T63 is a Japanese movement. VK63 is a Hong Kong made movement. I do not see such symptoms in any of the watches I own. Unfortunately, if the symptoms are severe, I suggest you contact the manufacturer.

I have tried some in watch shop and the employee said it's all the same, u can check on ur video 2:21 ~ 2:40 and try ur stopwatch, then tell me the results thank you, I'm just wanna know why and how to fix it. Maybe I'm wrong, well...just try it and focus on the minute hand(point to the wrong hand by mistake earlier).

@@PH-vj8gp Sorry. I watched the video part you mentioned, is the minute hand off when the stopwatch is reset? I can't tell.... Is it the in-dial at 9 o'clock? Or is it the regular minute hand? In any case, I cannot fix the symptom you are describing. I think you will have to contact Seiko directly. If you are dissatisfied with my video, then so be it.

@@LEOLEOROCKWatch the regular one, the long big one minute hand.

Thanks for your reply. While the stopwatch is measuring, the small seconds hand at 6 o'clock ticks the normal time. Naturally, the minute hand also advances with time, so it is unlikely that resetting the stopwatch caused the hand to shift. In the video, the stopwatch is reset in a few seconds, but is it off each time? I don't think so. The video has been viewed 10,000 times, but this is the first time I have heard such a comment, so I cannot say for sure. I think the best thing to do is to consult with the store or manufacturer where you purchased the product to resolve the issue. I apologize for not being able to help you.

It is a cheap Japanese watch. It depends on your taste. I made a video on my channel because it uses SEIKO mechanical quartz movement. Any problem?

Thank you for your question. Unfortunately, it was not the right size and could not be incorporated.

@@LEOLEOROCKWatch Did you have to replace it with a part that fit, or did you not use any chapter ring completely?

@@FalonKenobii I just did it as an attempt and did not go so far as to search for parts. So I do not know if I have a chapter ring that will fit.

Thank you for your comment. I think it is possible to change only the dial. However, if the panda color you are imagining is vintage 6236, both the case and bezel have different shapes, so you will need to get a different one.

Thank you for your comment. Sorry, I guess your question is whether the dial color is matte? If so, then it is matte. If I did not understand your question, could you please comment again?

Ma786sai dua I have one more question. I plan to buy a Seiko Monster. There is a 2020 blue coral reef Ltd edition 3rd Generation Monster for 1750 US dollars. And a 1st Gen black Monster 2012 for 750 US dollars. Is it worth buying the Blue Coral Reef Monster?

@@cyrussataravalla6731 Thank you for your question. I personally think the 1st Generation is better, depending on design and other preferences. Even considering that it is a limited edition, I think US$1750 is a bit expensive. Caliber are both the same 6R15, so there is no difference in accuracy. If it is in good condition, I would be more attracted to the 1st Generation for US$750.

Thanks for the comment. I think so too. I think it was made to look like one.

Yes

Thanks for your comments. The date calendar on this watch has been black since I bought it.

Thank you for your comment. This watch is old and I think the only way to find a used one is to look for one online. In Japan, you can find them on auction sites.

Sir meron ako relo a.G spalding bros normal ba d umiiko ung sec.kamay nya..for philipines pls anser me

Thanks for pointing this out. It was my mistake to make the video in this state.

Yes, it is. There is no difficult problem, just replace the movement.

Thanks for watching too. I hope you find this brief video useful.

Thank you for watching and commenting. Sorry. This watch is not for sale.

@@LEOLEOROCKWatch thanks for responding. Can you tell me what the small seconds sleep function is?

The stopwatch on this watch is 1/1 second, so the movement is the same as the small seconds. Therefore, the small seconds can be put to sleep. This is not a particularly useful feature.

@@LEOLEOROCKWatch thank you very much and I’ve subscribed to your channel as a small token of appreciation. Im currently looking to purchase this watch on eBay and can not find any info online regarding a miyota’s “sleeping seconds” function on any of its chrono’s, although it may not be advertised because it’s somewhat useless. I assume you mean that you can enable the small running seconds to cease running altogether. If you don’t mind instructing, how do you enable the sleeping seconds?

Thank you for subscribing to my channel. I checked and the small seconds can be stopped even under normal use. In other words, it seems that only the small seconds is hacked and the watch itself is ticking normally. Maybe the purpose is to reduce battery drain.

Thanks for your comment. In case you are interested, please refer to the size of the parts in the description section. What is not listed is the length of the belt, which is about 21 cm unadjusted. If I am missing any information, please let me know.

How i buy some parts, which store or place to buy?

@@angkuyamo4160 I bought them from a Japanese online auction, but you may be able to find them on AliExpress or other places.

Thanks for you information

Thanks for the comment. Alba has quite a lovely watch.

Рад, что вы прокомментировали и посмотрели. Спасибо.

Thanks for your comments, I will try to get back to you. The new screw-in crown fits without any problems. It was a much better fit than I had imagined.

@@LEOLEOROCKWatch it truly looks fantastic. Only missing minute markets

@@legendarymoji That's right. That unfortunately didn't fit the case.

Sorry for the late reply. I bought it on an online auction in Japan.

It is a no-name item, so I don't know the model number, etc. You can find it on Amazon, etc.

Desculpem, desculpem, não sei. Tentei procurar, mas não sei. Cintos Seiko genuínos desta cor não estão disponíveis no mercado. Parece haver cintos compatíveis disponíveis. São muito semelhantes.

This model has a brushed back.

Thank you. This case may indeed be a Pagani case. There is no engraving on the back cover, so that might be the only difference. the SBTR dial fits easily. I think it is actually better than it looks in the picture.

The length of the belt is approximately 21 cm.

Thanks for your comment. Yes, I agree. As you say, they are very similar.

The luminescence is bright green on the index bar and hour and minute hands. It is beautiful. Sorry I can't show you.

No, I just tried to imitate what people were selling.

Unfortunately, no. It is ordinary crystal glass.

Thank you for your comment. The belt of this watch will not fit because the lug width is different from that of "Fugu". Fugu's belt is a flush-fit type, so a special belt would be preferable, but they are not readily available in the market. It is better to contact Citizen directly.

Yes, it is. It's an old watch, but it's a bit unusual, so I made a video of it. Thanks for the comment.

I'm sorry for the late reply. I bought it on Yahoo Auctions in Japan, and there may be some on eBay and other sites.

Thank you for your comment. I like the looks of this model. It is my favorite model too. It is nice to see it being used for a long time.

@@LEOLEOROCKWatch You're Welcome😊👍

Thank you for your comment. I got the case and bracelet from an auction on Yahoo Japan. The crystal is the one that came with the case. There are no-logo watches of this type for sale for about US＄60, so it may be less costly to use them. They are probably made in China, so you may be able to find them on eBay, etc.

Thanks for your comments. It is a nice watch, I agree. This was my first Citizen mechanical watch. What surprised me is that the winding feeling of the mainspring is very smooth compared to SEIKO and other watches. Citizen is known for its Eco-Drive, and that impression has certainly changed. As you said, I am looking forward to the innovation of quartz watches, but for Japanese people who still yearn for mechanical watches, it is also nice to have a good quality mechanical watch at a reasonable price.