- 15
- 275 840
Edgar_DIY
Приєднався 28 кві 2014
Simple DIY Fixes/Projects Anyone Can Do. Save Money & Enjoy!
AC Avalanche Ultimate R-1234yf Review & How to Refill AC System 2019 Ford Fusion
Leak started at the beginning of last year 2024. I refilled the system twice with other AC refrigerants but no stop seal and the cold AC air would only last a day or less and it was about $100 too fill each time. I was quoted $500-600 for the leak and refill.
After using this product and relying on the AC for the weekend, the AC stayed cold! Re-checked the psi and it was at an ideal amount and didn't go down.
I believe that this product has helped fix my leak and I would definitely recommend it!
I hope this helps 🙏🏻
After using this product and relying on the AC for the weekend, the AC stayed cold! Re-checked the psi and it was at an ideal amount and didn't go down.
I believe that this product has helped fix my leak and I would definitely recommend it!
I hope this helps 🙏🏻
Переглядів: 13
Відео
Replace Engine Air Filter 2013-2020 Ford Fusion 2.0 Ecoboost (non Hybrid/ Energi models)
Переглядів 36День тому
This video is for only full gas models. Hybrid and Energi models have their engine air filter located above the engine. I was super happy with the performance of the current engine air filter but I couldn't pass up the killer deal for an authentic K&N engine air filter from Advance Auto Parts. Link to similar but non K&N Engine Air Filter amzn.to/4j3CSNW Link to authentic K&N Engine Air Filter ...
Replace Ignition Coil on 2013-2020 Ford Fusion (P0302 fault code/misfire)
Переглядів 70День тому
Issue: Engine code P0302 cylinder 2 misfire. Symptoms: 1.) Harsh startup and RPM would fluctuate between 1-3k no matter if the engine was hot or cold. 2.) Running rich and strong gas smell 3.) Horrible MPG FIX: I would recommend to start here first. I changed the spark plugs on all 4 cylinders with oem Motorcraft plugs and erased the code; Still a harsh startup and idle and code reappeared shor...
How to replace 2013-2020 Ford Fusion license plate light 194/T10/168
Переглядів 67Місяць тому
This is a simple video done on my Ford Fusion but a lot of newer model vehicles use very similar housings and the process is the same. I used a flathead screwdriver but feel free to use a pry tool. I like to use the LASFIT T10 wedge bulbs because they last a long time, great customer service, and they have a great look at night. Link to these LASFIT T10 wedge bulbs amzn.to/4gKldJd I hope this v...
2013-2020 Ford Fusion Shift System Fault FIX
Переглядів 362Місяць тому
My car wouldn't shift into any gear. This is the same procedure for 2013-2020 Ford Fusions. Thankfully, my car is a 2019 Ford Fusion 2.0 Ecoboost so the access is easier than other engine models that are tucked under the air box and hoses. Part #'s: KV6Z7K340A - Transmission Shifter Bushing There are a few part #'s and colors depending on the year Ford made the bushing (White, Orange, and Yello...
Infiniti G35 Front Fender Panel Removal
Переглядів 32 тис.5 років тому
Tools you will need: - Ratchet (can also use a wrench) - 10 mm socket - 12 mm socket - 4 mm Allen Key - 10 mm wrench - Phillips head screw driver - Flat head screw driver (optional) *You will have to loosen or remove a portion of your bumper and side skirt*
2004 Infiniti G35 Tail Light Removal
Переглядів 3365 років тому
Tools you will need are - 8 mm deep socket - Flat head screw driver You will need the flat head screw driver to remove the push retainer pins that hold the trunk liner in place. I personally recommend disconnecting the negative battery terminal whenever you deal with any electrical component on a vehicle.
2004 Infiniti G35 Headlight Removal
Переглядів 3,3 тис.5 років тому
Removing my Infiniti G35 Coupe headlights. You will need: - Ratchet - 10 mm socket - Socket adapter * 4 mm Allen key (possibly) * Flat head screw driver/Phillips screw driver (possibly) I personally recommend disconnecting the negative battery terminal whenever you deal with any electrical component on a vehicle.
Headlight Bulb Replacement for Infiniti G35
Переглядів 24 тис.8 років тому
Replacing my 04' Infiniti G35 Headlight Bulb that went out. Bulbs retail around $50-$80/pair for OEM replacement. Bulb brightness I went with is 5k because it's Crystal Clear White Lighting that illuminates the road and signs better! Link to other video for Tail Lights Not Turning On: ua-cam.com/video/nQtA_TnMBwI/v-deo.html\ Link to purchase the Headlight Bulb Replacement (GTEPERFORMANCE) : www...
Oil change on Infiniti G35
Переглядів 6278 років тому
DIY Oil Change video of my 04' Infiniti G35. I do an oil change on my car every 3,000-3,500 miles. Process should be the same for 03-07 Infiniti/Nissan (not 100% certain for newer models)
Infiniti G35 Camshaft Sensor Bank A Location & Replacement
Переглядів 108 тис.9 років тому
2004 Infiniti G35 Camshaft Sensor Bank A location and replacement video. A little detailed video to show not only where the location is but how to replace the sensor. Real simple. It's said to take anywhere between 15-60 minutes depending on your experience. Hopefully this video helps! REQUIRED TOOLS: 10 mm wrench 10 mm Ratchet is optional but not necessary to take off first but shown in video,...
DIY: Re-clearing A Carbon Fiber Hood
Переглядів 6 тис.9 років тому
This video shows how I re-cleared my dried out seibon carbon fiber hood. The weather wasn't in my favor the whole time so when you do this make sure it's a decent sunny day (if you have that luxury I know some people may live in cloudy/rainy areas). If you have questions don't forget to leave them in the comment area and always remember to like and subscribe for more tips/diy projects.
Infiniti g35 tail lights won't turn on
Переглядів 100 тис.9 років тому
My 2004 Infiniti G35 tail lights won't turn on but my headlights, brake lights and signals work.
Thanks I crashed mine into my mom Cadillac Escalade😔
Is it a white ligh LED D2c,and does it come with Ballast,or The Ballast should be already there?
@gilbertosanchez7497 yes d2c white led bulb 5k or even 6k if you want a bit more white-blue tone. The ballast is on the car already. Just remove old bulb and insert the new bulb the same way the old one comes out.
Mines keep blowing out smh I tried with a 20 and still same.
Did you figured it out bro?
I'm having the same issue with my 06 m35 works when I brake but when I drive at night it don't turn on at all blinkers and everything work what you think it could be a fuse or electrical problem ?
Thank you for the video! Appreciate it!
Thx for ur help Edgar I was going to paid somebody to do that for me but i got it 👍
Still nothing for me
I'm having a problem with the opposite My tail lights won't shut off everything else works fine any suggestions I got an Infinity G37 2013. Don't want to get ripped off to take it somewhere could you please help have any suggestions
It could be the rubber pedal stopper. Have also heard it called the brake grommet. If it's deteriorated, then the brake lights stay on. Cost about $20 or less. Hopefully, this is your issue. If not, then it's more than likely an electrical issue that would need the eyes of an auto electrician or experienced auto mechanic. I hope this helps
So I replaced those fuses woyld there be ones in the interior I should replace to in the other 2 fuse boxes that can blow or is it idpm
If it doesn't work, then it's going to be idpm box. If the fuse blows as soon as you turn the lights on, then try 20a fuse. I resorted to size 20a since the 10a kept blowing, and it did the job. If you want to check to see if it's the ipdm or see where the problem is, take the car to an auto electrician, but they run about $80-$100/ hr. I wish I had more info on this for you but hopefully this helps
Thanks for this I need to go to a pick your part and pick up a panel
I switched out yhe Fuse and tail lights still dont work
I hope it's something simple and not the ipdm box. If your other lights work like the license plate light, then it might be that. Try a bigger fuse to start (20a) and go from there. Try disconnecting the battery for at least 10-15 minutes. Make sure the battery is good too and that it's not fluxing the power. Change the fuse to a bigger size like 20a (will not damage anything). Trouble shoot first then see about taking it a good place to diagnose the problem. Hope it works out for you
All my lights work on my Infiniti g35 other then the brake lights like even my back running lights
Why do i feel traumatized by what you did to that g it’s probably cuz i have one and am too scared to do that. If you could make videos on all the parts and how to do it easiest ill pay you i need to replace basically all body side parts pls
Thanks Man. Really helpful 👌
I can’t get the angled sensor connector off at all …any ideas or tips ? Thanks
The sensors are going to be hard to remove. When I first removed my sensors, they felt like they were glued on. It took some time (45-60 minutes if I recall) but wiggling gently and pulling out aggressively was the only way it came out for me. If you haven't already, remove the plastic covers that hold the weather stips underneath the wiper blades for a bit more clearance. It's just doing this until the sensor is off.
Do you still have the front side driver fender for sale
Hey are you still parting the car out?? I’m looking for the driver side front fender for the 2005 G35 coupe
how do you take the rear fenders off
cant
I changed the fuse on my 05 G but the next day they went out again? Do you think it’s the wire this time or what?
It very well could be. It could also be aftermarket lights that pull too much power (headlights, taillamps, license plate, etc.) I had replaced my headlights and had to start using a 20a fuse for the lights as the 10a would also burn out after a few days.
@@edgar_diyno problems since then? How long have you been running the higher fuse ...?
So I have a 2003 g35 and all the running lights work but when I hit the brakes I have no brake lights. The hazard lights work as well but I can't figure out why I have no brake lights
it didn’t work for me
Great video bro it’s hard to find videos that get straight to the point thanks for the help man
Was ripping my hair out trying to get my lights fixed. Thankyou for this video
Did your taillights work when you brake? Turns work like yours and tails are off but if i brake they’ll work, i want them on even when im outside the car
Best video I've seen for cars. Thanks a lot man. Really needed it.
thanks bro im bout to fix mine next week
Do the headlights need to be removed to take the fenders off?
They're in some way wedged together. The headlights do not need to be fully removed but you will have to loosen it from the fender or the corners may chip or scratch the lights.
Thank you!
You made this wat easier frfr
Nice vid! Do you know where the wiper relay fuse located on 08 G35?
License plate light not working
What about the back lights on the plate I need help
Do you still have parts bro????
For the side skirt did u just pull it off ?
My side skirts were not stock and by this point in the video, they were sold already. They should have a mix of clips and screws. Some when you open the doors and against the inside of the front and rear wheel well.
Still not working
You still got the engine ?
Getting the green clip out is a fucking pain holy shit
Bro big ass thank you!
Where did u sale your car parts at
eBay or Facebook market place or offer up
Thanks for the video man. You got straight to the point and was very informative. Unlike other videos I’ve seen. Thanks a lot man!! I gotta change mine either tonight or tomorrow forsure!
Thank uuu
Mine keeps blowing anyone know why ?
i need fenders 8702159587 n headlights
Of course I would be the only one this ain’t work for
lazy shit vid
❤
Supercharger for sale ?
Is it all gone
thanks, i crashed mine into a pole drifting
SAME!😋
Crashed into a parked car drifting 😭😭😭
I hit a gaurd rail😢😂
classic g moment 😅
I bought a car off someone who couldnt drive too
Hey do you by chance know how to change the bulb for the headlight strip?
Hey man please get back to me I just looked and my cover is missing for the box I’m checked the fuse and it’s toasted is there one for the low beams? My high beams work but not my low beams
From what I can see, the fuse for the low beam lights are in the same fuse box shown in the video. The fuse is the top right. Here is a link. Hope this helps. g35driver.com/forums/lighting/311058-headlight-fuse-location-help-please.html
Thanks I replaced the fuse it was blown but it didn’t fix my problem what else could cause my tail lights not to work when my headlights are on
Hey bro just bought a 2006 g35X sedan and I’m having that problem brake lights work so do turn signals and reverse lights I’m gonna check the fuse in the morning i have a question though my low beams won’t work but high beams will how could I fix that
Is that a turbo??
Pro charger