Відео

Thanks for watching and the comment much appreciated

Thanks for watching and the comment, appreciate it.

Many things determine value, mostly location. Condition, options, hours, what it needs, local demand etc. one location a machine can bring 500 and another 5,000.

Yes the 600 series had the option, a toe brush mower are available for all models as well as all with 3 point which had option of rear finish. Thanks mower.

That's a great idea for moving it around. Thanks for the tip!

Not sure what you are asking about for the belt?

In the video we explained the possible causes and symptoms etc. Not sure what you are asking? Thanks

@@caseingersolltractorsnortheast I meant what’s the actual problem with the smoking coming out from the valve after it’s repaired? Just head gasket?

Have to pull the front cover off and remove intake, some equipment means you have to pull the engine. Could also be a valve or push rod issue as well as possible ignigtion issue. Thanks for watching and the comment .

@@caseingersolltractorsnortheast your welcome it was running good I think the guy never took the old gas out of the tank I checked it and it stunk really bad

These are Good Years but are no longer available. They are 9.5. Thanks

A must and you are welcome, thanks for watching and the comment!

Appreciate that! Thanks for the comment.

Ya they can need some reinforcement lol. Try 2 bars makes it much better. Thanks for watching and the comment. Merry Christmas

You are welcome glad to help. We have lots of new and used parts at caseingersolltractors.com thanks for watching and the comment. Merry Christmas

Yes it is the same procedure and no need to be nervous just make sure the tractor is level and you are good to go!

Agree they are the easiest for sure! Thanks for watching and the comment!!

@@tylerhoertsch1240 hi no you should have no issues at all, we run diesel or racing oil and Schaeffer's is great stuff, 15 40, 20 50, 5 50, 15 50, 5 40 all are fine. Thanks for watching and the comments

Is there much of a reliability difference between the case and the ingersoll when they bought them out? Like having the filter making a big difference? Anyone ever install an aftermarket filter system on the case?

@@tylerhoertsch1240 No they are basically the same machine not much change over the years, yes people ad filters to them. But they do fine without but filters are a added benefit. Thanks

Thank you for the kind words and watching! Enjoy your new tire changer!

Thanks and congrats on your 646 you will love it. Let us know if we can ever help and we stock many many parts and ship 6 days a week all over North America at caseingersolltractors.com Thanks for watching and the comment!

Hi Yes replace the bearings. We have videos on how to rebuild deck. And parts available at Caseingersolltractors.com You can email or call if you need help or chat on website. Thanks

Will I need to rebuild the deck if it has been sitting in a barn for 20 years

Most of the pulleys are rusted right through

Glad it was helpful! We will have some carb Video s for Nikki And Zenith Marvel DD And VD carbs in the future. Thanks for watching and the comment.

The grease fittings are on the axle itself above the pin on all models... Thanks for watching.

Hi they are changed the same way, you use this heavy duty linkage for the lift as well or we have the stock linkage at caseingersolltractors.com too

Thanks, you can spray, we use brush on. Correct belt makes bigg difference as does our upgraded 19 tooth sprocket as well at caseingersolltractors.com thanks for the comment

It ran before... Ran after... Pleanty videos of them running. Video was a how to, did not need to add length of the video if running before was not a major issue. Thanks for watching.

Hi Right at caseingersolltractors.com thanks

Hi right at caseingersolltractors.com thanks

Glad you found it to and thank you for supporting us by getting your parts from us. Yes, if not replacing the hubs you don't even have to remove them. But in the videos we try to show as much as we can and many possible scenarios even if current situation in video actually requires them or not. But yes just bolting on pre assembled hubs it's easiest. Thanks again!

Ideas are great help. Do you have one on brake/ parking brake for the 446 tractor? I couldn’t find one.

*videos

@@CathNcamo2 Its one of the many on the to do list lol, tie, time time. Thanks!

Sorry but you don't know the facts lol.... There is 750 lbs in the weight box as stated, plus the box and 3 point so there's around 925 there total... The tired have around 8 gallons each of liquid in each so roughly another 150 there. The reinforced bucket and teeth was probably another added 75 or more. The webbed and gusset rear over standard rear with backhoe axles roughly another 75 lbs. So roughly 1250 added lbs so like I said around 3000 lbs with operator actually I would say over by a good amount...... Thanks for watching and the opportunity to get in detail again and educate about the weight of this machine.

You are welcome thanks for watching and the comment!

@@CathNcamo2 we plan on making one, we have the parts available on our website and if we can help reach out. Thanks

@@CathNcamo2 that's awesome, great machines and memories. Thanks for the comment.

@@CathNcamo2 yes and they need to be space and adjusted correctly to the flywheel. Thanks for the comment.

Thank you and thanks for watching and the comment! Glad to help!

Thank You!!

Glad you enjoyed it! Yes many options and capabilities. Thanks for watching and the comment.

Thanks so much for the kind compliment, we try but forget and learn every day lol. Thanks for watching and commenting!

Hi only a few minutes. Happens pretty fast. There is a link to the product in the description. Thanks for watching.

Thanks I'm in Chicago and thinking about mobile detailing in the winter vs opening a shop

@@djwashx just figure a way to anchor it as the wind will catch it. Best of luck!

Glad it helped. Thanks for watching and taking the time to comment.

@@jimquick1249 hi I would say 70 90 or 80 90 or synthetic versions. I can look for a manual. There might be something on line. Thanks for watching and the comment.

Hi I think the early 1980's Thanks for watching and the question!

Glad to help man keep at it. We stock many parts let us know if we can help Caseingersolltractors.com

Yes tires can be miserable lol... Sorry to hear of your troubles. Thanks for the kind words! We are located in CT. I say go for the David Brown dont know until you try! Best of luck, thanks for watching and the comment be sure to subscribe!

You are most welcome thanks for watching and glad to help. Let us know if you need parts or anything.

@@daveheilig8416 glad to help! Thanks for watching and the comment and support!

@daveheilig8416 you are welcome and thank you!

@djmtexas hi for what model engine. Its in the video for a couple models. Thanks

@@caseingersolltractorsnortheast it’s actually a Onan generator. Onan 4.0 bf-3cr/16000b

@@djmtexas Sorry do not know of the top of my head there should be manuals on line.

Heat and air hammer. Can try pumping grease. But will catch fire. Sounds like you need a bigger air hammer. What model tractor?

@@caseingersolltractorsnortheast yeah I pumped some grease in there hoping to free some things up, but it’s a 4016 I believe, and yeah the air hammer I have is a 4inch 2,800 bpm. Maybe I need to try and find a bigger barreled or less bpm.

​@lukefields97 ya the LONG BARREL Cheif From Harbor freight is great for price. Let me know how you make out. Thanks for watching and comment.

@@caseingersolltractorsnortheast man that’s the exact one I got! It doesn’t even really budge, so I guess I need to try and melt that spindle and axle down. And yeah man you’re welcome, I love the videos!

@@lukefields97 ​@lukefields97 get full flow air connects think they are xalled milton "v" style. Big enough compressor? And thanks