Відео

I am not in favor of 2 ohm loads nor the bridge option (not possible on 2 ohms either!). Max 2.6 ohms (3 x 8 ohms parallel max). If you want more sound, or more SPS/Db's, then multiple speakers and multiple amplifiers for the space or music style that is needed.

1 op 18,4 aantoonbaar haha 😂 😂

I recommend keeping the amplifier original and opting for a good X-over or system controller such as the Martin Audio MX-4 or 2 and adjusting the settings correctly.

​@@JohnvL I'm using a soundweb BSS BLU-100 which is better in my opinion. And the software is great (audio architect)

@@Francoisl76 I love analoge stuff, lol 😆 😆

She’s 70! Leave that woman alone! Can you move like that? A little tired! 😒😒

Still on the top, good woman, good star, nice person

napiszę tak nie znasz to nie opisuj, nie masz pojęcia kto co przeszedł w swoim życiu, z czym się zmierzał, z czym cały czas musi walczyć, kogo ma u swojego boku, komuś oddajesz serce, zawodzi Ciebie mężczyzna oraz otoczenie, ciągle walczysz o prawdę, jesteś szlachetnym, ktoś przekłamuje rzeczywisty obraz mnie, wszystko wokół to plotki oraz umniejszanie mojej osobie

strong person, love life, optimism forever, coco heart, nice, very warm

mooi man, helaas gemist

You are absolutely right. But 9 years ago I had a camera that records bad sound. I now have a Panasonic that registers perfect sound. The vid format was also lower then than now with my current camera. Also now have fiber optic internet connection.

First think safe! The power supply is very high ⚡ powerful around 140 amp's!!! Then if the capacitors are absolutely discharge with like a normal bulb lamp (230v/40w or so). Check or replace the capacitors on the main out module. There are four of them 2 x 22µF 160v and 2 x 220µF 80v. The two 220µF i replace a 100v one. Then all of a good brand and 105°. If you lucky then problem gone. Warning its 2 side print!, i replace to cut the old capacitors short and use old wire and connect the new one's. Also mark + and - like a red and green colored marker. And take pictures before you start. If you not are familiar with electronic, DO NOT OPEN AMP! Seek a good repair man.

@@JohnvLthanks for quick replay, well I 've been servicing on amp for over 40 years but I just ask you a trick before to open the chassis cause I do not have any service manual and a little bit hurry to solve this problem......in case the caps you said are not the problem .....what else look or test?

@@ppaolosan Then advice to change the A and B module (do not bend the wires, and cover de open power supply connectors for safety. Usa a variac to start at low voltage) If the problem goes to the other channel then its the Pre-amp /output stage. If the problem stay at same channel the the problem its at the display board or output relais. Be carefull of the wires and never in a hurry! But i dont understand, one channel is in protection mode and have (lower output ) sound?

@@JohnvL John can you please detailed explain me what is the circuit function of those caps you hint me to replace on it? And why they would be able to maintain on the clip leds on all the time during sounding operation?

@@JohnvL well Both channel sounds, one of the two sounds weaker aprox 70% less and the both clip red leds stay on all the time ....the others leds are Off....that's it

what help?

made USA! Trust me! And some parts from Japan, also Quality parts. But careful at fake part from some chinese companies. Use original replacements parts and check it by original documents, and if you not shure, testing! If shop also selling dresses, skipp it!

You know electronics?

Try replacement cap's C48 C47 (220µF/80v) to 220µF/100v and the two caps 22µF/ 160v (from good brand and use 105° (degrees)) shown in this vid at 4 and 9 sec (pause) ua-cam.com/video/FSkNf5Yl8-Y/v-deo.html