Відео

Thanks for the advice! I am still messing around with the audio and such to try find a good middle ground. and on some time adjusted shots, I'm still not fully certain what is a good way to adjust the audio so it isn't so distorted. I'll keep looking into it :)

Glad it helped you! I would highly recommend going about it one piece at a time. When I first started I just cut everything out first and BOY was that a mistake. The minis this time are also push fit, if you find they don't fit as well as you like, most seem to recommend cutting out the push fit part and use glue to bond it together for a better fit.

You will probably have to look into local areas around you to avoid any shipping fees. For this specific bow I bought it from Merlin Archery www.merlinarchery.co.uk (I have also tried www.alternativess.com and they were pretty good) Hope that helps! (Probably good to mention that I was charged customs fees for both sites though, so that might be something to keep in mind)

Hi! I use a Sony A7 III and a Zoom H4n Pro recorder. The lens itself is a SONY FE PZ 16-35mm and for the mic I am recording directly from the devices mic itself. Hope that helps!

@@unsealreveal749 it might I hope to start streaming some day and so I've begun to ask what people use thank you for responding!!

This was the Green Samsung S23

Glad you found it satisfying :)

Definitely!

Thanks for commenting! It is a very nice riser, some cost cuttings vs the Gillo GT but also comes with a slightly lower price tag :)

I am keeping an eye out for the same one now. I was so close to buying the one you got lol. The red in you video looks amazing.

Hi, the price of the riser and the limb together was about $360 USD after customs and fees it was closer to $450

Thank you for watching!

Glad you liked the sounds :)

Glad you liked the sounds! :)

Glad you found that therapeutic :)

:) Chaos is my friend

Glad you liked the sounds from the video :)

Noted! Thanks for the comment, I'll definitely keep that in mind on my next short!

Glad you liked it!

Will definitely include that Tag going forward!

Interesting question, so the riser I have is a 17" riser combined with Limbs which would result in a 62" bow. The original string I bought from Merlin Archery were the Bearpaw traditional dacron string for a 62" bow and that worked ok. The issue I had with this string was that it required a LOT of twists to get to the proper bracing height. Untwisted the Bearpaw string sits at around 151 cm tip to tip. I later bought an Ameyxgs archery string from aliexpress that is 149cm length. I found this was a lot better for me because it didn't require as many twists (but at the same time it might not be enough twists but if you go for a higher brace height it should work well) I think the sweet spot would be around 150cm length. Some manufactures go by the bows AMO length. Hope that helps!

@@unsealreveal749 Thank you so much for your answer, it helped me a lot... It is generally recommended, about 1/2 to 3/4 twists per inch.

Hi, did you mean the magnetization? I used the original Gorilla Glue (yellow) and a mix of 5mm diameter by 2mm thick magnets and 3mm X 2mm magnets. The larger magnets were used for the larger arms and the smaller magnets were used for the lighter arms. (I would suggest even larger magnets since the wings are very heavy, and for the glue I would suggest a super glue that doesn't expand like the Gorilla Glue Blue, I was having a lot of issues because of the expanding glue). I used a drill bit that had the same diameter to drill out the holes to fit the magnet into (go nice and slow so you don't end up making the holes too deep.) Hopefully that helps :)

You're Right! Actually I thought it just came with it because it makes sense to weigh the bottom down, but it doesn't actually say on the list of products that it's provided. The riser is very nice, solidly built, and very nice looking.

Thanks! So far, just a random assortment of items, still messing around to see what works best visually and audio wise :)

Thanks! Actually the newer models (or push fit) are pretty nice and I completely agree, this model looks amazing!

Glad you enjoyed it !

It's an amazingly simple and quick game, actually perfect pick up and teach a small group to pass a bit of time :)

haha, thanks for checking up on me once in a while! As for the leviathan box, I just couldn't resist ;).

I want to get the leviathan box so much, but i want to finish painting my minis...And i have a lot of minis. Cant wait to get it tho and thanks for showing me whats inside!

That's just how easy they go together ;)

@@unsealreveal749is it magnetized? Or something

Some are if you choose to take the time to magnetize it, but this one is just glued together. This was just "movie magic" ;)

@@unsealreveal749 totally movie magic

@@unsealreveal749 denial irrelevant

Thanks!

Will do ! :)

Almost too many to count :)

Glad you liked it!

Glad you liked it :)

Glad you enjoyed it :)

Hello, this is a badminton racquet made by Victor Sports (victorsport.com). The racquet is a Victor Thruster F Enhanced.

if you will paint them i would LOVE to see them!

I want to paint them, but I've seen too many images of nicely painted models with nice plasma glow. So it's really stretching out the process :P

The first time i painted them the plasma coils were so bad but slowly i evolved

Hello, you would have to reach out to your own local badminton store or one that ships to your location. An example is Yumo.ca

@@unsealreveal749 Original bat not available in my area. I want the original bat. How to get?

Hmm, I'm not too sure then, sometimes what you can do is have it shipped in from another seller from outside of your country. Or if you have forums where people come together and discuss badminton, sometimes there are parts of the forum where there might be people selling/buying badminton racquets. Hope you the best of luck in finding it!

Haha, thanks! They were a joy to build. The largest issue I had was the stand they went on because it was such a small connection. But then again that might be because I am using Tamiya Extra Thin Cement rather than the normal glue.

They are actually really nice, the last few that I've built from the Omnissiah's Talon box were a little more fragile, but these guys are nicely posed and sturdy.

and im not sarcastic

Hahahah, thanks! It's a hand warmer, pretty useful especially because it splits apart and each can actually be used like a backup battery. I use it to charge my camera battery sometimes :)

@@unsealreveal749 lol

ill give you a tip:if you want more subscribers post on youtube shorts its a good start to a channel

Honestly, no idea how to do shorts yet, but I'll take a look into it :) Thanks for the advice

Thanks! I just only recently got into Warhammer and it was actually hard trying to decide between the infiltrators and the ruststalkers. These models were definitely dynamically posed out of the box which was very nice.

@@unsealreveal749 The infiltrators are cool but if you dont want to play warhammer i think some cooler models are the reivers. Im waiting for some models and i will tell you about which models i enjoyed building:D

Definitely want to try playing some Warhammer in the future, the idea of building an army that fits your play style seems like a lot of fun, just need to eventually reel in my friends into trying it :)

@@unsealreveal749 im having a really hard time finding someone that likes to play warhammer because my friends dont really like it

Ya, board games are pretty easy to get into but warhammer requires time to paint your models (to make them stand out) then there is the complex part of all the rules from what it seems. If i'm going to hook any of my friends it it will probably have to be very low point games ;)

They came out very detailed, it's my first time ordering from Etsy and I'm glad they came out as detailed as they were given the size.

Hi, I'm actually not too sure myself, I think most likely they started using the clear cap and handle to show off the free core technology used in the handle of the Thruster F Enhanced.

Thruster F enhanced has several versions. This is one of the earliest versions made in China(clear top+clear bottom). The earliest version that's made in Taiwan has a blue bottom cap.

Thanks for subscribing and commenting! I haven't considered painting videos for now since it doesn't fully match the theme/style of the videos, but I will see if there are ways to includes those videos in the future :).

@@unsealreveal749 what are you planning to unbox in the next video?Im courios also while you were building tech priest manipulus i was also building him too:D

@@blob642 I'm actually not too sure yet, I'm trying to mix it up, so it might not be Warhammer yet. Whatever I get my hands on I guess. The Tech Priest was a fun build, pieces went together very nicely, though some pieces definitely felt "fragile" especially the back spikes.

Glad you liked the video!