- 59
- 6 460
Home Studio Improvement
Приєднався 24 вер 2008
Behringer TD3 Shenanigans
The Behringer TD-3 and TD-3-MO bass line analog synthesizer. Despised by some for being difficult to program; embraced by others as a box full of analog squelch and "happy mistakes."
Based on the infamous Roland TB-303, which had been originally designed in 1981 for guitarists to practice with by the legendary Tadao Kikumoto, mastermind of the TR-808, and TR-909.
The TB-303 was later snagged up from pawn shops at a discount by techno musicians, eventually becoming a staple of acid house music at the same time that the unit was discontinued by Roland. Over time, the market rate for used units went through the roof, fetching many times its original price and becoming unaffordable.
During the 2000's Propellerheads Software released an unofficial emulator known as "ReBirth," which combined two TB-303, a TR-808, TR-909, and delay and distortion in a single window. It became very popular, but was discontinued due to IP claim infringement from Roland, much to the dismay of many home studio musicians.
This left a huge hole to fill, as Roland was clearly out of touch with music trends, having abandoned several of Kikumoto's children which had become hugely influential in several genres of music. Eventually a DIY movement rose up to create hardware replicas of the units, and even expand on the idea by modding the kits.
From that spirit comes Behringer's TD-3-MO, which stands for "Modded Out."
Based on the infamous Roland TB-303, which had been originally designed in 1981 for guitarists to practice with by the legendary Tadao Kikumoto, mastermind of the TR-808, and TR-909.
The TB-303 was later snagged up from pawn shops at a discount by techno musicians, eventually becoming a staple of acid house music at the same time that the unit was discontinued by Roland. Over time, the market rate for used units went through the roof, fetching many times its original price and becoming unaffordable.
During the 2000's Propellerheads Software released an unofficial emulator known as "ReBirth," which combined two TB-303, a TR-808, TR-909, and delay and distortion in a single window. It became very popular, but was discontinued due to IP claim infringement from Roland, much to the dismay of many home studio musicians.
This left a huge hole to fill, as Roland was clearly out of touch with music trends, having abandoned several of Kikumoto's children which had become hugely influential in several genres of music. Eventually a DIY movement rose up to create hardware replicas of the units, and even expand on the idea by modding the kits.
From that spirit comes Behringer's TD-3-MO, which stands for "Modded Out."
Переглядів: 33
Відео
Tutorial: One-finger chords using Cantabile VST Host / Live DAW
Переглядів 10121 годину тому
This video shows you how to set up a Cantabile Song template to do one-finger chords using MIDI transpose across 4 duplicated virtual embedded racks. Here, I'm using Arturia's Ensoniq SQ80 VST emulation as the instrument and Alesis VI25 as the keyboard controller, however any keyboard controller with any VST or midi out mapping to hardware keyboard should work.
Used Rev2 unpacking/unboxing and first play
Переглядів 23Місяць тому
Used Sequential Prophet Rev2 16-voice unpack/unbox and first play
HSI Cooks: Scrambled omelette with fresh pico de gallo and freshly baked tortillas.
Переглядів 28Місяць тому
Made Mexican breakfast. Scrambled omelette with fresh pico de gallo and freshly baked tortillas.
Patio Chairs Unboxing & Assembly Nuu Garden DB134-02
Переглядів 11Місяць тому
Unboxing and assembly of Nuu Garden Black Iron Outdoor patio chairs DB134-02.
Novation Summit Factory Trumpet Patch
Переглядів 1152 місяці тому
Improvising some sultry jazz trumpet using the Novation Summit Factory Trumpet Patch
How to program a bass line or melody on a TD-3 / TB-303 FOR DUMMIES
Переглядів 422 місяці тому
How to program a bass line or melody on a Behringer TD-3 or Roland TB-303
Unboxing: Behringer TD-3 Analog Bass Line Synthesizer with 16-Step Sequencer
Переглядів 452 місяці тому
Unboxing: Behringer TD-3 Analog Bass Line Synthesizer with 16-Step Sequencer
Unboxing the ZWO AM3 Telescope Mount
Переглядів 2925 місяців тому
Unboxing & assembly: ZWO AM3 New Wave Harmonic portable telescope mount with ZWO TC40 tripod. Weight Capacity (lb.) 17.63 lb. w/out counterweight, 28.66 lb. w/ counterweight.
Unwrapping the Florentine Codex
Переглядів 126 місяців тому
This morning's secular quiet time: Unwrapping the Florentine Codex
Point Vicente Lighthouse Time Lapse
Переглядів 126 місяців тому
Point Vicente Lighthouse, Rancho Palos Verdes, California. Lighthouse timelapse only. Saturday, April 27, 2024.
Point Vicente Lighthouse time lapse. Lighthouse, rocky shore, birds, sailboat.
Переглядів 46 місяців тому
Point Vicente Lighthouse, Rancho Palos Verdes, California, yesterday morning, Saturday, April 27, 2024. Video timelapse (2min 30sec). Lighthouse, rocky shore, birds, sailboat.
DJI Ronin RS3 Pro Issue - Doesn't lock when turning off or go into position when turning on
Переглядів 2,1 тис.7 місяців тому
DJI RS3 Pro Issue - Doesn't lock when turning off or go into position when turning on after a couple of cycles after a hard reset. This has been an issue since I've got it. Downgraded firmware and re-updated to latest, it did not fix issue. Also done everything else, including calibration, reset settings. It's balanced and charged. It also drains battery when off. Battery does not fully charge ...
What is the Hitchcock Effect?
Переглядів 307 місяців тому
What is the Hitchcock Effect? An explanation, example, and howto on this camera movement. (92 Seconds). #filmyoutube #cinema #hitchcock #cameramovements #filmmakingcommunity
Cinematic Storytelling: Camera Movements: Dolly Shot
Переглядів 87 місяців тому
First video in my series on cinematic storytelling. In this video, we talk about the dolly/tracking camera movement.
Unboxing: Roland k25m keyboard dock for Roland boutique line
Переглядів 3008 місяців тому
Unboxing: Roland k25m keyboard dock for Roland boutique line
Automating the zoom on Sony mirrorless camera A7R with DJI RS3 Pro
Переглядів 128 місяців тому
Automating the zoom on Sony mirrorless camera A7R with DJI RS3 Pro
Ten minutes of a patio and fountain w/ damaged film fx.
Переглядів 108 місяців тому
Ten minutes of a patio and fountain w/ damaged film fx.
This video is a game changer for camera gearheads
Переглядів 98 місяців тому
This video is a game changer for camera gearheads
Troubleshooting Sigma Zoom on Canon M6 Mark II
Переглядів 1098 місяців тому
Troubleshooting Sigma Zoom on Canon M6 Mark II
Unboxings: Hoya Solar Filter and Astrodymium Ring System for Rokinon/Samyang 135mm F2
Переглядів 598 місяців тому
Unboxings: Hoya Solar Filter and Astrodymium Ring System for Rokinon/Samyang 135mm F2
Rain & Windshield Wipers - Nature Preserve and Interpretive Center. No talking.
Переглядів 338 місяців тому
Rain & Windshield Wipers - Nature Preserve and Interpretive Center. No talking.
My camera gear: DJI RS3 Pro, LiDAR RF, Sony A7R IV, Canon M6, Sigma & Samyang lenses
Переглядів 948 місяців тому
My camera gear: DJI RS3 Pro, LiDAR RF, Sony A7R IV, Canon M6, Sigma & Samyang lenses
Bolsa Chica Ecological Preserve sunrise timelapse, 32x. Huntington Beach, CA. (1 min)
Переглядів 189 місяців тому
Bolsa Chica Ecological Preserve sunrise timelapse, 32x. Huntington Beach, CA. (1 min)
Pneumatic CAN CRUSHER unboxing, assembly, and first test (Radio Edit) 6.5min
Переглядів 1,1 тис.9 місяців тому
Pneumatic CAN CRUSHER unboxing, assembly, and first test (Radio Edit) 6.5min
Pneumatic CAN CRUSHER unboxing, assembly, and first test (Extended Director's Cut)
Переглядів 4679 місяців тому
Pneumatic CAN CRUSHER unboxing, assembly, and first test (Extended Director's Cut)
Something I realized later is that you can actually remove the plate on the TC-40 with the quick release, which would make it easier to attach to the AM3 mount.
Do u know what specific type of material was used for the casing?
Excelent set ❤ I also have good music for you here on UA-cam 💪
even with a pick I can't connect the 16 pins cable correctly, maybe that is why I can play some notes and some notes don't play?
Look at the pins carefully and make sure they are all aligned
Heavy
Same issue 😒
bravo
thanks!
@@home-studio-improvement <3 no, thank you! i need to download this so i can keep hearing it! do you have any official recordings?
@@XenonOrion Not at the moment, maybe after I have everything in my studio set up properly, I'll put something together
@@home-studio-improvement I'm sure many would love to hear it! So cool to hear a synthster that can actually play the keys! Not just a knob twiddler (like me). Reminds me of the great Oscar Peterson.
Update: I had to send it in to DJI Support at repair.dji.com to get it repaired and they repaired it at no cost since it was still under warranty.
same issue here!
HOW I CAN SOLVE IT
And I want it not to lock 😂
This needs to say 22mm not 20m it doesn’t come right up in search because of it.
same problem here! exactly the same. one motor is malfunction and is always keeping the battery grip on trying to calibrate even if it s turned off
I have same issue, i will send it to dji, but i have a job to do with it so i found out when you tilt it with hand to folded position when loose, it will reset itself and work for a while
Iam facing the same issue its torchering
I have a Tamron EF 24-70 f/2.8 lens. My M6II has no problems using the Viltrox adapter or the viltrox speedbooster. I like the 17mm f/2 effect with the speedbooster.
Update: this turned out to be an issue with the camera. On my other M6, it works just fine.
ThanX for this!!......Jus wondering.....will the keyboard connected together....fit in that Big Box?.....So I won't hav to disconnect it....mayb break the wire.
Yes, it should fit. Just remove the empty box that's in the space where the keyboard goes.
Great points, so tired of the camera hype
I think you have the same problem that I have with my adapter, you need first put on the adapter after turn on the camera and after put on the lens
Will try that! However, for now the lens is on my Sony rig.
That sucks!
Might have to get one of these
What is the difference between the cable with the BOX and the regular cable? Why does it need that huge box dangling off the cable? Does anyone know? I’ve gotten it to work without that box cable.. ?
Good question. My *guess* is that it's to regulate the voltage, but I'm not sure.
Yo- Wow~great uploading- =)
This is a work in progress.