Відео

Haan woh replace kar diye .. because they had insurance.

Aap andslite ke website pe check kar sakte hain.

Right... but our farm is far from city to be able to buy one from the shop and did not want to wait till I buy one. That's why had to do what was on hand. Thanks for viewing and suggesting.

Yes sir absolutely right

Good performance. But we have water shortage in the Borewell.

Thanks a ton boss for appreciating.

Most welcome 😊

It's great to hear that I could help you fix your problem.

Thanks

He he. Thank you for watching the video. Glad that my video was of some help. Please let us know when it is fixed and what are the ratings of the fuses.

hi

Hello ma'am

🤣😁😂

Nahin sir. Aaj tak chal raha hai 2 saal ho gaye. Aap har roz inverter pe water pump chaalaana chahte hain Kya?

@@gizmobrain 8 din baad

@@gizmobrain company ki taraf se motor chalane se warranty nhi milti he aisa suna he... This is right or wrong information

Nahin waisa koi limitation nahin hai. Also company doesn't verify which source of electricity you are using. Motor ka coil jal jaye toh woh baat alag. Power source se koi problem nahin hota. Over voltage se hota hai.

@@gizmobrain ok... Thank you so much🙏

You can ask for slotted GI channel for solar panel mounting in the shop. Even you can show this video to them if they don't understand the name of the item. I remember it is 2 inch channel. J hook bolts are used beneath the sheet to clamp with 2 inch square pipe below the asbestos sheet.

Thank you for your appreciation. Are you planning to install solar panels?

Thanks a lot

Thank you sir ji. Aap ko pasand aaya. Kya aap RO ka kaam karte hain?

Kya karna chahiye bataiyega

Battery condition check with authorised service center Check self starter carbon brush. Injector check Fuel pump and oil filter check

I don't think you can get it in the market or online. You can try shops that make custom hoses for pneumatic systems or hydraulic repair shops. All the best!!

Microtek 800 EB. 800VA. 12 volt input. Square wave inverter.

Thanks a lot for your appreciation

Angul

Aur aap?

@@gizmobrain keonjhar

Waaree solar panel bhala kama karuchi ta ?

Very nicely working

Taj Meter shop sange katha huantu. If they can receive by bus. Else you can travel by train or bus.

Mono perc 545 watts. Waaree make Around 17k INR

They charged 1300 rupees to repair the meter.

Nice that you liked the video.

Ghar bannta hai

Could be a battery problem. Did you check the 4th plug as well? Regarding your battery doubt, please visit the dealer of your battery manufatcurer. They will check your battery condition. By the way, how old is your battery?

Bhai eita Krishna hotel, Chandanpur, Odisha. Hotel ra kitchen. Roshei ghara nuhen. Taanka hotel. Taanka ichha. Ame ta customer.

True. But 1 bag normal cement is RS 300 whereas white cement is 1200 (4 times costly). That's why I used white cement for top layer only.

As far as I remember, it came around 900 rupees. Not very sure though. It was long ago.

Haan bhai lag jayegi

It is a local brand. It would have costed me around 25 INR. I have another similar tester from Stanley. That one costed around 80 Rupees in local market. But that has a wide tip. That creates issues while opening narrow screws in sockets or switches. I prefer using the local ones. Thanks for watching.

Only blue colour tint if you want bright white. Mix water only. Nothing else required.

No sir you don't need anything to make it shiny. You just need to rub in the white cement solution with a trowel very carefully and repeatedly to make it smooth and shiny. But be careful, wet feet and white cement are a very slippery combination.

Noted. That's a helpful suggestion. Will try to find time to add English subtitles. Life's too hectic these days

What exactly is burning?

@@gizmobrain under the parts of self starter motor I have even changes new itself but it always getting destroyed under two days or three days after changing the damage one

Check over current coming to the coil. Do you have any video of that?

@@gizmobrain no sir I don’t have but iam really fed up I have already change 3 time one time I have put new self but facing same problem

Are you getting it serviced at authorised service center?

Thanks a lot buddy.

Side mein jo do points hain. 2 Pins on the side of the charger body is negative / earthing. The point at the tip of the charger is Positive terminal.

Please check while purchasing the mouse. I bought it with Unifying receiver. In case the mouse comes with the unifying receiver, you will see the logo on the blister pack. So I prefer buying from Amazon since we can return easily and can ask questions. Also other reviews will help us understand the contents of the box. Then we can take better and informed decisions about buying the product.

So nice of you

Kis cheez ka price chahiye batiaye. Pataa hoga toh bataa denge. Thanks for commenting.

Hey guys. Thanks for noticing the video. What does I&C and EPC mean? Would be great info for our viewers.

@@gizmobrain - I&C = Installation & Commissioning. and EPC = Engineering, Procurement and Construction :-)

@@StatconEnergiaaPvtLtdNoida thanks a lot. Can we use lithium ion battery bank on this inverter? Do you know someone who can customise battery for this lead acid compatible inverter? I also heard from Statcon dealer that some parameters on this inverter can be configured by the manufacturer to support aftermarket lithium battery (lithium ion or LFP). Is that possible?

Did you try connecting the SSD to a laptop / PC / using an external SATA to USB converter to check if the SSD works fine? Does the DVR not detect the SSD in settings? Could need to format before it shows up in the storage. Just some pointers. Hope something helps.

I returned the memory for safety, I'll try with another SSD, maybe less expensive. And I will try to use a Sata/Usb cable... thanks a lot @@gizmobrain

Hey don't be so grumpy, I understand it is in your genes (Pun intended, no offence though). Let me explain. The overheating glass fuse heated up so much that it melted insides of the 2 halves of the connector holding the fuse inside. The melting caused both the halves got "Fused" together. Hence they were not coming apart even after unscrewing the screw from the tiny bolt. So, I had to pry open the 2 halves using the nose plier which broke the glass fuse. That's costs a cent so I did not care if it broke. Now if you see carefully, there is a scene where I show a closeup of the inner sides of both the halves. Now let me also explain why this happened. This one is a cheap Chinese made device. They did not care to provide a higher rated fuse / a better connector. I expect that you would know that thinner conductors when are subjected to high currents, heat up and melt, thus called Fuses. The current pulled by the load (motor) while inflating the tyre could not just flow without overheating and melting the connector. Hence I had to replace the connector with another one. That one was flimsy too. So I had to cut a connector from a good quality but defective car inverter (Belkin made) and patch it to this one. It saved my day. Hope it saves someone else's day. By the way. I loved the way your tone of the comment and your youtube handle are so nicely complimenting each other. Peace.

Another observation, inglish, sdounded, holing, faxt, ther, undrsand - Thanks for teaching me some new terms. Google translate. Beat that.

@@gizmobrain looking at the vid now I can see i'm wrong. Sorry I must have looked down when you showed the burnt insides. Once i seen the broken fuse i stopped bothering caring to be honest just figured some one posing another show somone how to not do something correcly vids and i'm surre you have come across them yourself. In this instance I am complewtely wrong. Thanks for letting me know. now go find somthing else to fix and stop wasting your time writting to assholes who dont watch the whole video and makes comments incorrectly. I gave you a thumbs up. this time.

@@grumpygenesworld it's all my pleasure. I just wanted to explain the video. Appreciate your efforts and time to watch the video. Means a lot to me as a content creator and problem solver. Now I think we need to fix your phone's autocorrect. It's spewing typos 😜

There are a lot of variables to decide the perfect ratio. Steps to do ************************************************************* - Use the same mug for measuring dry cement and water - Use 1:1:1 ratio of (1 mug cement : 1 mug water : 1 drop ujala blue / cement blue tint) - Make a batch of maybe 2 mugs cement, 2 mugs water, 2 drops tint - Mix thoroughly - Try it on a patch of the freshly made floor - Make sure it is not very thick - else it will crack when dried completely - Make sure it is not very thin - else it will show marks of the lower gray colored cement from below - After pouring the white cement mix, it should be levelled with very light hand using a trowel , move to another part of the room, repeat - Come back to the first part of the room and start rubbing with the trowel so that the water goes in, white cement rubs in to form a shiny hard surface. It is a time taking process, needs patience and skill to achieve. But is cost effective - Use the cement, water and pigment mixture within 1 hour else it will set hard, rendering it unusable. - If you feel that the mix is too thin / thick, use your own ratio to increase or decrease the ratio. But keep a note of it and use it always on that batch of fresh floor. - Ratio changes with cement quality, brand, fresh floor status, wetness, season of the year, dry or wet, and such other parameters. So trial and error will help you get the right ratio. Stick to the ratio that you find useful. **************************************************************** Caution : When dry, the floor tends to feel slippery if walking with wet feet. Hope this helps you. Good luck.

​@@gizmobrain🎉

No Idea. But will try to ask the owner if they are willing to let us know. I suppose it is their trade secret. Maybe search on youtube. There might be other videos for flyash brick making, who would have already given the ratio in their videos.

The meaning of TINT is a usually slight or pale coloration. Like we are using a bit of blue color to make the white look whiter. Like we use ujala in white clothes.