- 30
- 55 746
Timothy Roy
United States
Приєднався 30 тра 2011
TP-Link Omada EAP783 to Intel WiFi-7 BE200 Speedtest - MLO Enabled - Windows 11 Canary Build
This is a speed test between a TP-Link Omada EAP783 Access Point connected via 10Gig, by an Aurora R15 with an Intel Killer BE200 WiFi-7 Chip. Windows 11 24H2 Canary Build 26212.5000 was installed on the PC with the BE200 WiFi-7 chip. The PC is one room away from the AP through Drywall.
In the Omada WebGUI Interface I created a MLO SSID combining the 5GHz and 6GHz bands. All endpoints on the network are 10Gig. Internet Speeds I pay for are 2100 Up/Down which is the fastest I am able to get currently from my ISP. For the Open Speed Test Server "SpeedTest", that was over my 10G network to a 2nd PC running Windows 11 23H2 Retail.
0:00 - Setting up MLO SSID on Omada Controller
0:38 - EAP783 to PC's Intel WiFi 7 Speedtest One Room Away Using MLO
1:43 - PC's Intel WiFi-7 Connected to MLO SSID, OpenSpeedTest to 10G PC
2:36 - MLO SSID Win 11 Canary Properties showing Aggregate
In the Omada WebGUI Interface I created a MLO SSID combining the 5GHz and 6GHz bands. All endpoints on the network are 10Gig. Internet Speeds I pay for are 2100 Up/Down which is the fastest I am able to get currently from my ISP. For the Open Speed Test Server "SpeedTest", that was over my 10G network to a 2nd PC running Windows 11 23H2 Retail.
0:00 - Setting up MLO SSID on Omada Controller
0:38 - EAP783 to PC's Intel WiFi 7 Speedtest One Room Away Using MLO
1:43 - PC's Intel WiFi-7 Connected to MLO SSID, OpenSpeedTest to 10G PC
2:36 - MLO SSID Win 11 Canary Properties showing Aggregate
Переглядів: 1 495
Відео
TP-Link Omada EAP783 vs EAP690HD, EAP783 Unboxing, EAP783/SX3206HPP LAG Setup
Переглядів 4,9 тис.8 місяців тому
I just picked up a new EAP783 off Amazon for $500 and wanted to show it off since I haven't seen any other videos on it. In this video I show off my network setup. Run EAP690 HD WiFi 6e Speedtests to an iPhone 15 Pro Max and a Alienware R15 which both have WiFi 6e compatibility. Unbox the EAP783. Hook up and adopt the EAP783 to my network and update it's firmware. Then set up a LAG between the ...
Cameo by Todd Stashwick, Captain Shaw on Star Trek Picard Season 3!
Переглядів 938Рік тому
Todd Stashwick plays Captain Shaw on Star Trek Picard Season 3. He shares a neat behind the scenes story from set. I’m sure it was dream come true for a sci-fi fan like Mr Stashwick to join that cast and get to work on those sets.
Daniel Davis Cameo on Star Trek Picard Season 3
Переглядів 1,6 тис.Рік тому
With the show having started this week and the reviewers having access to the first six episodes I felt it was ok to post this again. I got this Cameo the day after the NY Comicon trailer dropped. I was asked to pull it down and I did out of respect but its close enough now that S3 started up!! Minor spoilers
Cameo by Elizabeth Dennehy, Cmdr Shelby on TNG's Best of Both Worlds
Переглядів 1,5 тис.2 роки тому
We saw Commander Shelby was promoted to Captain in Star Trek Lower Decks Season 2, but is there a chance she is returning to Star Trek Picard's Season 3? Will she get the chance to jab Riker one more time!!
Cameo from Paul Dooley, Star Trek DS9’s Enabran Tain!
Переглядів 4,9 тис.2 роки тому
Mr. Paul Dooley was kind enough to share a few of his memories from his time filming on Star Trek Deep Space Nine. His character “Enabran Tain” played so well off of Andrew Robinson’s character of “Garak”. I can’t believe he’s making Cameo’s at the age of 94!
Cameo from Avaah Blackwell, Star Trek Discovery and Star Trek Strange New Worlds
Переглядів 2283 роки тому
Avaah has a huge variety of roles to her credit on the newer Star Trek shows. I reached out to ask her about her time on Strange New Worlds and Star Trek Discovery. I also wanted to know what it’s like to be under all the prosthetic makeup for long hours. What a dream it would be to work on the shows. I always love to hear from people that have had the chance to.
Cameo by Terry Farrell for my Daughter Molly
Переглядів 3193 роки тому
My daughter Molly and I had the privilege of meeting Terry Farrell at a Star Trek Convention in recent years and the two of them had a couple of memorable interactions. Recently I reached out to her on Cameo. I ask her if she'd be willing to give Molly some words of encouragement as Molly is about to enter her teen years. I think what she said was wonderful, heartfelt advice that could honestly...
Cameo by Evan Evagora for Reddit's /r/startrek
Переглядів 6 тис.3 роки тому
Evan take's a few moments to talk about Season 2 of Star Trek Picard. Love Evan's portrayal of Elnor on Star Trek Picard and can't want to see what's in store for him in Season 2!
Cameo for Star Trek SubReddit by Michelle Hurd (Raffi), Whoopi Goldberg confirmed!!!!
Переглядів 1,5 тис.3 роки тому
Michelle Hurd confirms Whoopi is Back!!!
Cameo from Bill Smitrovich, Who Guest Starred on DS9 Season 3's "Past Tense Parts I & II"
Переглядів 1753 роки тому
Bill played "Michael Webb" on the amazing episode "Past Tense" which was a two part episode in Season 3 of Star Trek Deep Space Nine. Episodes 11 and 12. He talks briefly on what he remembers from his time on the show.
Cameo from Tawny Newsome, “Ensign Mariner” on Star Trek Lower Decks, to Reddit
Переглядів 5 тис.3 роки тому
Tawny shares a little bit about how she came to join the Star Trek family, what her favorite Lower Decks Episode is, her favorite non Lower Decks Star Trek episode and what Mariner is up to in S2!
He's Back! Shoutout to Reddit by "Q" himself, Mr. John de Lancie!
Переглядів 2,1 тис.3 роки тому
Q is back and he's ready to harass everybody on Star Trek Picard, especially Jean Luc and Guinan! What a legend Mr. de Lancie is! And for the record, I obviously added the “Q” flash noise and scene from TNG, not Mr. de Lancie. Edit Changes from first post: Moved the “Q” flash noises around the scene I added from Star Trek- TNG Season 3 since it flows better.
He's Back! Shoutout to Reddit by "Q" himself, Mr. John de Lancie!
Переглядів 3,9 тис.3 роки тому
Q is back and he's ready to harass everybody on Star Trek Picard, especially Jean Luc and Guinan! What a legend Mr. de Lancie is! And for the record I obviously added the “Q” flash noise and scene from TNG, not Mr. de Lancie.
Cameo by Nana Visitor, "Major Kira" on Star Trek Deep Space Nine
Переглядів 1,1 тис.3 роки тому
Cameo by Nana Visitor, "Major Kira" on Star Trek Deep Space Nine
Cameo by Alan van Sprang, "Leland" on Star Trek Discovery
Переглядів 2343 роки тому
Cameo by Alan van Sprang, "Leland" on Star Trek Discovery
Cameo by Robert Duncan McNeill, "Tom Paris" on Star Trek Voyager
Переглядів 8123 роки тому
Cameo by Robert Duncan McNeill, "Tom Paris" on Star Trek Voyager
Cameo by Emily Coutts, "Detmer" on Star Trek Discovery - 1
Переглядів 8563 роки тому
Cameo by Emily Coutts, "Detmer" on Star Trek Discovery - 1
Cameo by Emily Coutts, "Detmer" on Star Trek Discovery - 2
Переглядів 2573 роки тому
Cameo by Emily Coutts, "Detmer" on Star Trek Discovery - 2
Cameo by Anthony Rapp, "Stamets" on Star Trek Discovery
Переглядів 663 роки тому
Cameo by Anthony Rapp, "Stamets" on Star Trek Discovery
Cameo by Doug Jones, "Saru" on Star Trek Discovery
Переглядів 1213 роки тому
Cameo by Doug Jones, "Saru" on Star Trek Discovery
Cameo by Mary Wiseman, "Tilly" on Star Trek Discovery
Переглядів 5603 роки тому
Cameo by Mary Wiseman, "Tilly" on Star Trek Discovery
A shoutout from Rachael Ancheril, "Cmdr Nhan" of Star Trek Discovery
Переглядів 1,6 тис.3 роки тому
A shoutout from Rachael Ancheril, "Cmdr Nhan" of Star Trek Discovery
A Very Merry Christmas to /r/StarTrek from Doug Jones, "Captain Saru"!!
Переглядів 2,9 тис.4 роки тому
A Very Merry Christmas to /r/StarTrek from Doug Jones, "Captain Saru"!!
A shout out to Reddit's /r/startrek by Wilson Cruz, "Dr Hugh Culber" of Star Trek Discovery
Переглядів 5474 роки тому
A shout out to Reddit's /r/startrek by Wilson Cruz, "Dr Hugh Culber" of Star Trek Discovery
A shout out to Reddit's /r/startrek by Ian Alexander. Ian plays "Gray" in S3 of Star Trek Discovery
Переглядів 1,3 тис.4 роки тому
A shout out to Reddit's /r/startrek by Ian Alexander. Ian plays "Gray" in S3 of Star Trek Discovery
A shout out to Reddit's /r/startrek by Daniel Davis, "Professor James Moriarty" on TNG
Переглядів 9 тис.4 роки тому
A shout out to Reddit's /r/startrek by Daniel Davis, "Professor James Moriarty" on TNG
96 years old as of this date, and still kicking. Such an inspiration.
The Algorithm sent this my way again. Howdy!
Nice. I noticed you had some extra ports on your ONT. What are they, as a matter of interest?
@@TheNorliss 1gig Ethernet for slower internet packages and an old school phone line connection
what did you buy this unit for? i thought it was priced around $300 previously but seems now its priced around $500 USD while the EAP773 is $189 USD
@@connormccaffrey $500 is what I paid. With the exception of a short window after it was initially released, which I missed, it’s been priced at $500.
She did return and became one of the highest ranking Starfleet admirals. 😂
Hi any update with mlo enabled devices
@@captshadab one of my other videos I tested MLO with windows 11 24h2 beta. I haven’t retested since windows 11 24h2 final came out. iPhone 16 didn’t come with 320mhz channel support so not true WiFi 7 so I didn’t bother to upgrade to test with that either. Sorry.
@ hi thanks for the reply. Am making a jump from ubiquiti u7pro max. They are amazing devices but they have a serious issue with iot devices on 2.4ghz. I have 50 plus devices iot on 2.4 and u7pro just throws them away randomly. Have you experienced any such issues on your iot devices. H mind asking how many 2.4 ghz iot devices you have and how is it handled
I am terribly disappointed by the throughput. I use iperf3 and did a test via asus be88u vs tplink eap 783 + sx3206hpp. wireless transmission to my phone just within the room. I got about 700mbps bidrection to my phone from asus but only 300-400mbps to my phone. I think eap783 is far from mature, i will not recommend it for now based on the cost.
@@peterlai9895 try matching the power and Channel settings I have in the video. I don’t recall if it’s this video or the other shorter one on my channel for MLO testing.
what is your internet speed accoriding to your ISP not the one from the Speedtest?
@@longtieuphuc2883 I pay for 2gig fiber up and down. I don’t know if Fidium/consolidated communications has their own speed test. But that speedtest server for consolidated in the speed test app is hosted on their server.
Fun character to watch in Star Trek and nice to see that she’s enjoying her life😊
Hi, I have just installed a intel be200 WIFI 7 card into my intel laptop. I have connected to my Asus gt-be98 6GHZ & MLO network and the max speeds i have seen 1ft from router & 20ft roughly are rubbish 1.4gb down & 2gb upload. I have installed the latest driver for the card and also set my router to 320MHZ. I just feel really disappointed with the speeds. I am on 2.3gb symmetrical connection.
@@shaun9601 ya I seems WiFi 7 product sellers all around have advertised using pristine lab settings and not real world settings.
@@TimothyRoy yeah its totally disappointing.
Werent u in the military.
Can the 2nd ethernet port be used to connect other LAN devices if the LAG is not utilised?
@@koustuvkanungo9873 I believe it can be used for down stream access points. Unsure if it can be used otherwise
You did a good job on sarge from cars
Just bought into Omada with my house running 670s, is ceiling mounting ideal or is having then on a table as you have them fine?
@@j0shuaj Ceiling mount makes sense if you have access to run the cable or have a pro do it. In my case I have an Ethernet wall jack behind the access point and switch shown so just placing it right there made sense for my small House.
Unifi is my go to but impressed on the tp link equipment just no 2FA and overheating issues from bad power management keeps me away from omada
@@fleeseeks Omada has 2FA. Can’t speak to power management.
you should run an openspeed test or iperf server locally. also you forgot to do a speediest to the old 690e with the wifi7 card. 10 bucks it performs the same via the "online" version of speed test
Can the second 10g port be used as a POE pass-on or only as a LAG?
@@Someguy21341 pass through to other Access points yes, POE I am not sure. I think only the main port on it is POE.
Dude Thank you for the video. I have no clue how you figured this out since i have found ZERO documentation on setting up LAG. I have all the same hardware and I got loop back issues because i did not know about enabling the truck. Yea ti would be nice if there was a conformation that we actually are getting 20GIG connection to the switch. I will never use that much bandwidth so i might see if i can just connect the second Ethernet to a different switch for redundancy... Neverless thank you. I
@@bradmesserle999 You’re welcome. I’m happy new people have found the video recently and found it helpful!
Oh, here we go... A video about the MLO! Nice.
Amazing video! Thank you! Hopefully MLO can be tested soon.
@@thomazd in another video I posted on my channel I tested MLO with the Windows 11 24H2 beta.
@@TimothyRoy Great, just checked!
Thanks for the video, a lot of useful info
This is awesome. I believe if you used Active LACP instead of Static LAG you might have seen the 20Gbps (with the knowledge that you would still only ever get 10gb per link) that should let you have two full speed streams to the rest of the network.
Thank you! It fails to connect and starts rebooting ports all over the network with that setting set. The EAP side can’t handle those settings. I confirmed with TP-Link support that I set it up correctly given the EAPs limitations.
@@TimothyRoy when using LACP, one side needs to be passive, the other side active.
@@bober1019 in this case, that breaks the connection. I confirmed with support I have it set right. Manual confirms
@TimothyRoy I had a quick look at tplink community forums and seems LACP is either not working or not supported... apparently there is no mention of which standard it acctualy is capable of. plus the fact that they call bonding "trunk" tells me this might be a half-baked product/firmware. I have a 690e which i switched from a unifi 6 enterprise, and I am much happier but TP-LINK aps seem to have very little to no firmware updates past the 6 to 12 month post initial release. I am sort of planning to purchase a 783 but might wait to see if this gets resolved... and to be honest, I have 0 wifi 7 devices and usually 1st gen devices and drivers usualy suck when a new standard comes out. but please, if you have time, try doing local speed tests from a server capable of 10gbps and try that wifi7 card again...( iperf3 or openspeedtest from a docker instance using host network, no natting) thanks
@@bober1019 check my channel. I have a video where I do that with win11 24h2 canary build installed. Definitely faster even from a room away through drywall. Rivals my 2.5GB Ethernet connection.
Awesome. Tp-link router has bunch of ports but only one sfp+ support 10 gigs, others 1g, that sucks. As user u' have to buy switch and other stuff
The TP-Link ER8411 Router has 2 SFP+ 10 gig ports.
you are right, but one is mainly for the WAN, the other is for the LAN and the other ethernet ports are not used. i just not count wan port.
Thanks man. DATA, this is a REAL review, abrazo!
Thanks for watching!
I tried this Windows version, but I still can’t connect to the MLO. How do you determine that it is still in the MLO state? You should be able to see it on the router’s WEB interface.
When you edit the SSID it should show the MLO checkbox still marked. Other than that and the OS showing aggregate on the SSID I don’t know how to confirm otherwise.
Which be200 driver version did you use?
@@it1106 I had to check the video to be sure but looks like I used v23.20.1.1
Thanks for taking the time to make this comparison! Any idea how the EAP 773 compares with the 783 in terms of performance?
I don’t but honestly given the speeds I got from the EAP783 were nowhere near even the advertised speeds for the EAP773 they are probably the same. Hopefully drivers and tweaks for windows 11 will increase what MLO connections can do for WiFi 7. Hopefully iPhone 16 or 17 has MLO so I can test that this fall.
Thanks for taking the time to make this video. Was very helpful.
I am glad you enjoyed it! Thank you for watching it.
Such a delightful woman for a character who plays a "need for high authority" type character. If only Shelby survived.
THE VOICE OF SARGE FROM CARS!!!!!!!!!!!!!!!!!!!!!!❤
Why he doesn't voice sarge in cars on the road
He was born in 1928. Looking good!
I have seen this episode, Moriarty is the best bit of this episode. Daniel Davis is just a superb actor...
Great Scott! You're talking to Molly, Jadzia.
Whizzer from Alf. I loved the show as a kid. If you know the gentleman, please convay my best wishes to him.
Man, this is awesome.
Outstanding performance. Everyone loves a well spoken and civilized antagonist. Nice cameo in Picard.
Sarge
I wish they could have invited Brian Blessed as Johnathan Small into the episodes as competing combatants vs Geordi and Data. Truly a privilege nonetheless
Ahh, he's so cute as a Romulan, too cute :D tihi
Apparently she does, she returned briefly in Picard season 3 ep 9
Yeah, but... Lol.
I think we can all agree that what we want to know is... does he have his steak with, or without, yamok sauce?
Yes, you made an impression! Superb acting, excellent representation of an iconic character - there can be only one Moriarty, Daniel Davis! Glad to see him again on Picard.
This is so cool
Now I got this video recommendation, a little late of course and he is amazing as Shaw, and I just love this dude, seems he is a trekkie 😃🖖
Isn't he just the loveliest guy. Thanks for posting this. Just wonderful.
Watching the episode, it’s a HUGE spoiler now that we know what Daniel Davis said
Wish they use David more in Season 3 Picard
I loved this character and his portrayal was perfect. It was like roy batty wanting to live while also being able to empathize with him. He had admiration and respect for the crew and was excited about the idea of traveling the stars as all of us were. But he was still a foil for picard without being an actual villain. Wish we could've gotten more episodes with him, especially after voyagers progress with holograms.
He’s in an upcoming season 3 episode of Star Trek Picard!
@@TimothyRoy that's wonderful news! I just wish that show wasn't so bleak and cynical. I don't think Gene would have approved.
@@grog3514 Season3 is what s1 and 2 should have been in my opinion.
I notice he's got trek items behind him, so I am going to guess he's one of us!
One of us! One of us! One of us! :D
Thanks for sharing this. He seems like a really cool guy.
I wish Moriarty came back to live free away from the Holodeck