Відео

Hi, Thank you for your great comment! there is more to come! so keep in touch

Hi, Thanks for your comment. I dont have problems with closing the suitcase. I think what you see is the hinge of the suitecase. It is sticking out a bit compared to the suitcase.

Hi! Thanks so much for your comment. I have all my devices connected to this printer, and if you're on the same Wi-Fi network as the printer, you can easily add it. You can do this by either: 1. Selecting "Add Printer" from the program you're trying to print from. 2. Going to your laptop's settings, choosing "Bluetooth and devices," and then selecting "Printers and scanners." There, you'll find an option to add a printer. Just make sure your printer is powered on and already connected to Wi-Fi. I hope this helps!

Hola, gracias por tu comentario. Siempre es bueno saber que a alguien le gusta el video. Cuando tienes un documento y quieres imprimirlo, tendrás la opción de imprimir por ambos lados. Si seleccionas esa opción, podrás imprimir por ambos lados con esta impresora. (google translate) Hi thanks for your comment. it's alway nice to hear someone likes the video. When you have a document and you go to print. You will have an option to print both sides. If you select that you can print on both sides with this printer

Hi, thanks for your feedback. The reason I don't speak in the video is so you can watch them at all time. So also when you don't want to or simply can't watch it with your sound on.

I hope the video was a bit helpfull

Hello, thank you for your comment. Unfortunately, it's a common issue with the X3 and S3 models. Fortunately, mine has been working properly for quite some time now. However, I've already had three of them break down. Now, when I start cycling, I press the turbo button and try not to apply pressure on the pedals.

Update: I contacted VanMoof to request a shifter replacement/repair. They said I can only get in touch with a “service partner” to resolve the issue, and unfortunate for me there is none in my country of residence. That’s the end of VanMoof support. I found a third party service provider located in Germany, who chargers about 100 euros to fix the eshifter. Sent it over today, hoping for the best.🤞

Hi, Thanks for leaving a comment. Good luck with your printer!

Hi Thanks for leaving a comment. As far as I can see Dreame says the following thing; "Only use Dreame Detergent and do not use normal cleaning solution as it will cause the water pipe to get clogged and prevent the water from dispensing" Of course, they want you to buy only their products, but besides that, if something breaks down, I think you might have an issue with your warranty.

Thank you for your comment! All the locks work independently.

Hallo, welche Anzeigen meinst du?

@@R-JayRockwellz.B. blinkende Ziffern, die kaum erkennbar sind. Nix ist intuitiv! Mein uralter HP psc 1315 ist da klar und deutlich neben den Leuchtdioden beschriftet und gibt keine Rätsel auf. Und, des tut mir für HP leid, aber die Entwickler sind in meinen Augen Idioten.

Hey! I got a size 10.5 myself. And I bought a size L ua-cam.com/video/JZIi54pH8dc/v-deo.html

Hi, Yeah mine als so makes a whooshing sound. Where I have mine I'm not that bothered by the sound but I can imagine if it's quiet in the room it can be pretty annoying.

Where did you get that fridge?

Hi, really? What's so horrible about it?

I think the base is quite simular. I hope to show you the s'cure line soon. So stay in touch!

Hi yeah, It can make a regular coffee/cafe crema and also an espresso

So far it's not a problem for me. Is it possible that you can solve it with the program you use to open your image?

Me resulta difícil decirlo. El asiento no es muy blando, pero es cómodo para sentarse. El tapizado es de piel sintética, por lo que tampoco es muy blando. (google translate)

Thank you for leaving a comment!

Hub likely

Hi, I'm sorry but I don't know what could be wrong. Maybe you can contact vanMoof again?

Hi, This error may occur when your bike cannot communicate properly with the E-shifter, or when the E-shifter cable is not properly connected. So if you are lucky it could be that the connector is loose or something

You're welcome! thank you for the nice comment!

Hi Thanks for your comment but what do you mean by "is roomba i7"?

Hi, to prevent your Karcher from breaking down, follow these maintenance tips: Regular cleaning, Proper Storage, Use the Right Detergent, Proper Operation Follow the manufacturer's instructions for operating the pressure washer, including water pressure settings and nozzle selection. And my last one broke because it was frozen. So Winterizing is also important. If you live in a cold climate, properly winterize the pressure washer to prevent freezing and damage to the pump and other components. Unfortunately they can always break down. If it happens let's hope you still have some waranty

It's amazing right? My wife is really pleased with it!

Is it the last model?

@@elifsenel1153 yes it is

Thank you for the feedback. I will keep it in mind in my next videos.

There is a button at the back but the if it is not working unplugging the power for a moment always works!

Mein System findet das nicht

Hi tHank you for your question. The cleaning solution will be added into the clean water tank automatically while working. So you can fill the entire detergent compartment

Hi, thanks for leaving a question in the comment. the blue light will appear when you will do the following steps: - Press the AuquaClean button for 3 sec. until the start light will start to pulse. - Than press the start/stop button to start the activation process. wait until the process is done and the bleu light will appear. You can see it from 5:27 until 5:53 in the movie

Thanks for the nice comment. Unfortunately I had to change mine 2 times. But I have to say the last one is allready working for almost 2 years

This was my 3rd ! Vanmoof swapped the first one (well Decathlon) then had a local bike shop do thw seccond. I have high hopes for the 3rd one !

Hi Thank you for leaving a comment at the video. I'm sorry but I totally missed it. For the Nest Thermostat gen 3 you have a google Nest Stand. If I'm correct the thermostat is getting power of a USB cable and will be connected with the heatlink true Wifi.

You're welcome! I really appreciate your nice comment. You have the option to put a detergent or a cleaning solution into the water tank. For a list of approved products by iRobot, you can take a look at the following link: homesupport.irobot.com/s/article/roomba-combo-cleanser I hope this is helpfull to you.

Thank you for your kind words! We really appreciate your positive feedback. Within the Roomba app's map, you have the option to avoiding certain areas. you can make a "no-mopping zone" for areas such as carpeted. The vacuum cleaner will then avoid these areas during its mopping cycle.

where do you have you enter this password?

You're welcome! And thank you for the comment! Nice comments is what keeps us going!

In the Netherlands you have fixjevanmoof.nl/ or www.e-bike-parts.com/nl/vanmoof-onderdelen/ or moofmender.com/ or www.replacedirect.nl/category/1876639-169964/vanmoof-elektrische-fiets-elektrische-fiets-ac-adapters.html#brand I don't know if they also ship international.

Is that a good thing? Personally I don't mind the sound of vacuuming but cleaning the dirt resevoir at the base station is quite loud.

Thank you! It's always nice to get a good comment!

Thank you so much! Your support means the world to us!

Hey there! Just measured my foot and it's 27.5 cm. I went for a boot size of 28.5 cm, which translates to 10.5 US, 9.5 UK, and 43.5 EUR. My regular shoe size is also 43.5

Thanks for your nice comment! 🙏

I'm a 100% sure but I think its compatible with all types of systems

@@R-JayRockwell great, thanks!

Were you able to solve it?

No, it's now telling me that the printer can't be found. I will just call the helpline

That's not nice. I hope helpdesk can help you.

Do you have to reset the wireless if you decide to turn it off after use

I had it too. You have to use a gental force.

@@R-JayRockwell yeah. I figured out that it’s real easy with a screwdriver bc it’s got that leverage and it doesn’t damage anything

Thank you for the nice comment!

Nice! Hope he will like it!