Відео

amazing comprehensive guide

Total time to charge those lipos ?

What weirdo uses uart 2 for gps, is it just to make things more difficult or something? lol isn't uart 2 like auto default setup for your actual controller link? Just not sure I have seen something that usually didn't just have a uart plug for uart 2 4 pin to go directly to an elrs. I guess there are all those odd flight controllers the airplane guys like to use like pixhawk or orange cube weird stuff. Just curious because like most modern style fpv flight controllers usually default to uart 2 for control link, did yours have a different uart default or.....I dunno if their is an or even, that's why it confuses me so so much. Hey can you help me btw with my gps, when I'm setting it up on the bench connected to betaflight with no battery connected, it can see the gps but won't connect to any satellites betaflight won't even give me a yellow light at the top for the gps. Just kidding, seriously on my first build it took me 4 days of flashing, reflashing, and rechecking my wiring, only to figure out the gps basically will never fully work without a battery connected, so as much as I joke about it, if I would have seen this before I did my first build would have saved me a massive headache and days of stress. I built a long range 10 inch for my first build, I was/am really really dumb......

9:51 even in 2024? Or would you suggest something better like phoenix 2 or ratel 2 etc

After looking at all lipo chargers in my budget, i decided for this one mainly because the internal resistance readings hoping they are acurate, I was going to get the ovoninc 300 because of the clean interface but declined because it doesn't measure IR ,even though that's what they claim in amazon ad. Or it does it??

Bro this video was so helpful thanks so muchhhhhh

Hi how about continuity check using Analog multimeter? I already set the dial into continuity mode (X1) There is a value on it but no beeping when I contact to Battery Pad (V and Ground) Is it okay? What should I check next?

Does your kickstand on the meter flop around? Mine doesn't stay in place when i try to collapse it down.

Thanks, crystal clear explaination 🎉

Yes I need audio

my solder iron was too thick. I cant install the gps

Can you fly analog audio with digital video

Thanks for cutting to the chase. Too many people go into too fluff. Beeping didn’t bother me either. And you were right it can he shut off.

Is this googles still god in 2024 ?

If your motors are getting hot then it's your tune, not the motors. Test out some Five33 Champion Edition motors if you want the best motor out there in my opinion. Fast, light, and efficient. Trust me, you can thank me later.

uhhh, ummm,uhhhhh, uhhh....

what if my googles have a type c cable?

I love that you made this video but the “ums” and “aaahs” are killing me😂

betaflight 4.4.2 barometer reading like shit😅...look like economy graphic😂😂📈📉📈..... i nav is ok..but rate feel like turtle..slowly... now im not using gps ..just release if we fly away...buy new one

HE CONNECTED TO TX2!

Ext. Discharge is not "Extended Discharge." It is "External Discharge" where you connect a battery to the charger's input and discharge to a load such as large resistors connected to the outputs. I think details like this are important to get right when talking about something that can be dangerous such as charging/discharging LiPo batteries.

As I understand, it's better to plug in the XT60 first, then the balance connector. That way if there's any initial rush of current, it's traveling through the larger wires rather than through the smaller ones.

For me the capacicator beebs ones but even after beebing it shows numbers but they arent the base numbers

"AAAAA" is all I could hear :(

This is the info I needed. Thanks for posting this ... 3 years ago now lol.

Can this change LiFeP04?

Wow, words, words, words, so little information. So much time to get to the point.

Thanks bro, i am absolute beginner, i wonder can we connect cam wire directly to transmitter, totally bypassing main controller😃

Nice video dude <3 , but i have to ask can these flight controller be powered directly without purchasing its ESC? Becuase i wish to use other ESC that i had lying around and to spend extra for an ESC which i already have seems stupid.

thanks man

My one came last night I've had a play with it and it is awesome I think I've picked the right charger

1800kv aint shit

Hey, can you juice up batteries using a car charger?

Still worth it in 2024?

How much are the hd3?

You are clearly knowledgeable but this vid could have been less than 5 min. It took 11:04 to get to the menu to see how to actually charge. :(

the wireless phone charging function isn't any good, loses connection after two minutes with no reason for it to lose connection, found this with other wireless chargers in the past too, most are shite

Can this lift a sony fx 3 please?

Bro who edits ur videos ?? If u then where did you learn this cool editing plz tell

I have the foxeer m10q gps and it has a 6pin plug and wire harness. Will i have to solder the gps mate to the gos rsther than using the wire harness?

Hi, If I do lose my drone and flip the return to home switch, when it comes back into range i and i can visually see it, can I toggle off the return to home and take control while it is still in the air?

worthless video

Newbe trying to figure out googles. Best video out there. Thank you for explaining this!

New to RC hobby and need a great charger that will be able to charge my 3s, 4s, and 6s lipo batteries....i am torn between this and GensAce Imars Dual Channel AC200W/DC300W Balance Charger Black? help me choose people

Thank so much for the video, it’s very helpful, especially for a newbie like me into the doc world. I bought this product recently to change GEPRC Storm 6S 1300mAh 120C Lipo Battery, I bought few of these batteries and now looking to educate myself how to use it accordingly. Do you have what settings I should use to change GEPRC Storm 6S 1300mAh 120C Lipo Batteries. Thank you in advance for your advice

Mannn not to hate or anything,u really need to change the background cuz ur autofocus is sooo all over the place 😅

May i know is charger port is mixed port for 2s to 6s balance plugs can be attached directly or with extra breakout board?

Are those two grey bars on the top of the screen the antenna that is being used by the goggles? if so, how do I get that on my osd???

Does it have FULL Amp charge power when charging whit 240Volt? most chargers want DC 24V for full charging power

Came here trying to figure out why my quad was bugging super hard and you answered my question at 4:33 so thanks! CAPACITORS BY THE MOTOR!