Відео

Thanks for watching! I ordered straight from lwrc

Thanks for watching! Yeah I’m still going to use them. It happens.

Thanks for watching! I’ll definitely do that. Sometime I get in the zone and forget the little things 😂

Thanks for watching. Could be a weak point for the mag release.

I love that idea. I’m due soon for one. Definitely going to test it out. Sandwich bag is a bit tough. Thank you!

@@stanleymoybien works wonders mate and made the oil change only tolerable haha No worries man, hope the mighty chaser is going strong 💪

Thank you for watching!

Thank you for watching! I ended up not using it. It has a different orientation for the velcro and what not so it didn't work with my belt setup. Frag pouch is still good though.

@@stanleymoybien ohw that's really strange, I thought it was a common thing having the inner belt with loop and the belt itself with hook, in my case it should be fine as the pouch in the front has loop and in the back hook right?

Thanks for watching! are all of fft’s products over priced?

@@stanleymoybien hell yes!!!!!!!

What's an other option?

Thanks for watching. I figured it’s a marketing thing they do lol

Thanks for watching. I’m not sure that design looks different. I’d check with fft before purchasing the part.

I have upgraded my Panzer M4 and so far all upgrades fit perfect , and in fact am putting this GG&G upgrade on mine today . The Mesa stock & Trucky foregrip , Upgraded Taran lift gate & 25% lower power buffer spring , and upgraded trigger parts all fit perfect , so will this I`m sure but if not I`ll put another reply in saying so . If you upgrade to 7 shell mag tube , get one specifically for the M4 Turkish clone , theres a thread difference on the end cap . Hope this helped

Thanks for watching. At the moment no. My old job didn’t require a qd tube/ clip. Do you have any recs?

@@stanleymoybien none at the moment but I’d love to find a way to make it happen. I have the AXL micro harness for my AVS and that micro harness no longer has the QD tubes setup. Not sure how to finesse it. May require a tailor

Thank you for watching. I did loop it through all of the webbing just so it’s as secure as possible. Definitely a pain but I feel comfortable knowing it’s fully secure. Not sure how secure it could be with the Spc vs jpc.

Thank you for watching. Appreciate the additional tip. Hope your install was as easy as mine.

@@stanleymoybien it was super easy ty. I broke my stock mag release trying to get it out to reuse it. Had to buy a new extended mag release for the ACE Macro frame.

Thanks for watching. I’m not sure. Might of missed that in the package

Thanks for watching! They do come with the valve stem. They’re in a box at the bottom

@@stanleymoybien That’s awesome. I wasn’t sure if they did or not.

Thanks for watching! It was pretty simple for me. I broke the gun in and I did this after.

Thanks for watching! I am able to use the same mags

Thanks for watching! I agree. I got into contact with mackin industries and they said GT is the correct color code for Grace silver. I was hoping it’d be more like sunlight silver or brushed aluminum look

@@stanleymoybien That's so weird. From all of the pictures I have seen of grace silver, it seems to be the more aluminum look.

@@truth8326 Yeah kind of butthurt. I was looking for the brushed aluminum look. Might just send them off to get polished or something

Thank you for watching! During pollen season I use it to clean off the cars and occasionally the deck when leaves accumulate. Glad you’re able to share it with your wife!

Thanks for watching!

Thanks for watching! I did not. Apologies if the video is blurry. But it’s a few inches lateral of the ac compressor and about 2-3 behind. You should see a small cap with an “L” on it.

Thanks for watching!

@@stanleymoybien I got one also best decision I made.

Thanks for watching! Me too. I expected something more like brushed aluminum/ brighter finish. I just emailed mackin industries. I hope I can get a clear answer from them. I couldn’t figure out how to use the rays Japan contact form.

Thanks for watching! Yes you can adjust it for left vs right handed shooters if I’m interpreting your question correctly

@@stanleymoybien what I mean is, normal kywi pouches you can take out the insert and turn it up side down. If I would by a lefty pouch of the 70 or 40, can I turn the insert upside down and have a righty pouch?

Thanks for watching! It was stand alone from esstac

Thanks for watching! I'm a size 30

Thanks for watching! Interesting, when I pushed it out, i just put the allen key into the hole and I was able to wiggle it out.

I tried prying it off with a blade while pushing the hole with a alen wrench and it came out easy.

Thanks for watching! It’s for the pair

Thanks for watching! Not sure how big your chest is. If I were you, I'd measure from right between your collarbone to your belly button. Your plate should cover that much on the front. On the back it should cover from your t1 - L1/L2.

Thank you for watching! Looking to clean up and reorganize the house. Hopefully can have a workbench soon!

Thank you for watching. You're so welcome.

Thanks for watching! 1014 is a mouthful compared to m4. Can always clarify for different use cases since they’re both very different tools

Thanks for watching. Yes it’s swapped to 1jz gte

Thank you for watching!

Thanks for watching! It’s a 2.0

Thanks for watching! Someone sounds a little thick 😂. All jokes aside these pants very are form fitting. I get what you mean. But I’ve always had issues with being a little thick and not have utiles of the pockets as a result. I hate sizing up bc then the waist is almost too big.

thanks for watching! Unfortunately the old exhaust is already sold

Thanks for watching! Not a dumb question. It came off. I’m not sure what to call it

Thanks for watching! Thankful that I work in the industry so I get a better price point than gp. Just wanted to show that it can be done with common-ish tools

thank you for watching! I love it!

Thanks for watching! I almost got a job there. Unfortunately the commute was too much for me. Still a great company though

@@stanleymoybien good channel btw

Thank you. It means a lot

Thanks for watching! Just small nuances

Thanks for watching! Hope I was able to help. Feel free to message me if you need clarification

thanks for watching! I do not. Make sure its pushed in all the way. Its a bit difficult to get leverage since its a tight space.

Thanks for watching! They're really good regular gummy bears

​@stanleymoybien Hopefully ill be able to ordef them before they go out of stock next time 😊 Thanks for the review

Thanks for watching! Put in a whole Box of 00 buck and she’s still strong and way better than the small og round button 😂

I’ll be replacing the OEM button this weekend along with a few other components from FFT to be in compliance with 922R. But I break down all my guns to get a better understanding and have spare parts that I think I’ll need. Thanks for the content🤘🏼

Glad I was able to help out!

Thanks for watching! Yeah I figured its a joke. Hopefully we can get cbd infused versions in the future, that would be cool.

Thanks for watching! Yes well aware, I put it in at the end of the video lol