Відео

Great in-depth video. What's the advantage of the Flomatic 202 vs just a regulator beer keg tap? Is the output pressure too high for a beer tap?

They'res still another model style you forgot

I just one up for free hoping to get it running!

I have a question could you use a 20 inch surface cleaner with this machine

Love your channel. Good job!

Also anti scalp wheels are also optional. As well. I have a 2011-12 model. And have spent days tracking down a grass catcher bag kit. Finally I was able to get one.

The rear bars on the 2011 model you have are not the factory ones.

The exhaust covers are optional parts that come with the bagger kits.

I got about 4 years out of mine. Won’t start now. Replaced the wand, then the wand broke. Paid 1000 dollars back then. Takes about 5 minutes to get to full pressure. I wouldn’t buy another one.

I got a barn find a month ago sr143316kve that's the 1997 33 inch cut w/14 ho kohler for 350$ well maintained with records stapled inside the original manual.

mines a series 23 w/ a 12.5 Intek engine & 28in deck w/ the mulch cover. I love it. The B&S engine shows no signs of stopping despite being about 20yrs old. I dont eactly know what year my mower is..... does anyone know a sure-fire way to determine the year? I think it's an 05, but it could be anywhere in that range really. My dad bought a new 2019 model in 2020 and gave me this one. I've removed the reverse lockout and defeated the seat kill switch too. Took the water bottle holder off & installed the mulch kit. It's a great mower for a residential property. I just damn near overhauled it....and only spent about $60!!! What a treat.

In your first pictorial, you correctly point out that good carbonation is a COMBINATION of Cold Temperature, Pressure, and surface area. I wish you had gone on from there with your explanations.in relation to your system[s]. The one that most confuses, is that you have the incoming water at a small differential of the CO2 gas pressure. In your first picture, the 'pressure' referred to is the Highest Differential of the CO@ infusing gas, ABOVE whatever H2O pressure. Ideally up to 150 psi CO2 ( I use 56) over ambient (zero)a H20 pressure. That, along with COLD temperature (maintained until serving) and either agitation/or H2O "spray" provides surface area for the best infusion. Thanks.

Awesome mowers BRIGGS, SNAPPER, BUILD THEM AGAIN

I prefer a Honda go motor with a cat pump

I had a handlebar one with 11 horse Briggs on it ,now I have an 04 with 14.5 Briggs most comfortable ride ever!

The older snappers used to be almost 21/2 times longer than now,had to have 40 acres to turn them around ,they were rediculous!

Would love to see how you plumbed for the fireboard.

How to find who sells Snapper Rear Engine riding lawn mowers?

I'm a stihl user 100% I bought a brand new th 600 on my third tank of gas the pump went out,,,just 2 months out of warrenty,,,my dealer keeps making excuses, absolutely no dealer support,,,,,,gona just scrap it and go to northern tool and get on of there's,,,,Honda motor and Kat pump

Can I put a cold plate in a fridge

Thanks for taking the time to make this more detailed presentation!

This looks great!

Great job!

Great Video, Thanks. Instant Subscribe. 👍

Charging my old Snapper and getting off seat w/o it stopping and motor stops running.

How to get get off mower seat allowing me to get off to charge battery w/o it stopping?

I have a question, please. Mine is a fairly old model, I've looked on the back for ID but nothing. Anyway, someone had burned up the stater trying to fix an ignition issue and has the wiring a bit messed up, with missing wire and obviously wrong hook ups. But that has nothing to do with the question... I just like babbling. I'm starting with a jumper cable directly to the starter to check for spark, and will figure it all out from there. The problem is, though I'm in neutral the engine won't spin but about 3/4 of a turn by hand or under starter power. Iong story shorter, I know it's not locked up from internal engine damage. It feels like it's just not in neutral when turned by hand, but I have it in neutral. Also, important to say It was running until the owner had ignition issues. Is there some type of safety engine brake or other safety device on this thing? I can't push pedals or the clutch while trying to start it because I of course can't get to them from the back where I'm jumping the starter and I'm alone. Can someone offer a solution ? FWIW, it's old enough to have the all metal engine cowling, but other than that I've no data on it for reasons given. Thanks for any help.

You may be the only one who can answer this. Typically is the wheel width the same as as the deck width? Looking at a 25" deck model but widest width cannot exceed 29" to fit in my van and ramp. I would think when you cut close, you don't want cut width to be smaller than the outside of wheels.

Show how you connected the dispenser ???

I like that the mowers change very little,if it works leave it alone !!!!!!

I need a dispenser ? What do You recommend?

You don’t need the 2 tanks ?

Wow! You have soda water on tap. 🥱

💯💯🔥🔥🔥🔥🐐🐐

Just found the same pump, but only the pump, to buy. I have a small company that make homemade soda. Can I use it? how I should built to put the co2? alrerady have the equipment to fix de tho bottles

I have two 28-inch cut Snappers. One from 1984 and the second from 2007. The drive mechanism on my early mowers is the same as these mowers shown. Really simple to maintain and work on. Just hope I can keep my two going for few more years.

They need to start making these again

They actually brought them back, for a time right??? I have a newer one, bought it used but I believe it's a model RE110? It has a 11.5HP B&S, a 28" deck, rack and pinion steering, but it's missing the bars you can stand it up on the back end with. My local power equipment shop tells me you can actually buy the bars and add yourself.

Wonderful job, Mr. Grove. I love the channel so far. Keep up the good work.

Can't wait to see more of this project!

HI MR. GROVE 🔥🔥🔥🔥🔥🔥🔥🔥‼️‼️‼️‼️‼️‼️‼️

I'm still using one that has handlebars and the 11 horsepower Briggs motor...33 inch deck....and leaf and grass bagger....they should bring back the first generations of this mower...one of the best consumer lawn mowers ever built!!!

Right on! Looks good! What seal did you use for the lid? Do you also have that seal for the door?

Jim Jackson has a YT channel about snappers and he answers questions promptly.

Are you referring to the rings around the cable (like thick washers) that can be slid over or under the pedal?

If you haven't fixed the vibration issue, take a look at an industrial supplier, such as MSC, Grainger, Johnstone...; look for isolation mounts. They are some w/ studs from either end of a central rubber piece, or some w/ 2 or 3 holes in a mounting plate on the bttm, & a stud on the top. Common widget in industrial automation. Thanks for posting, I think you gave me the clue to why the McCann I have isn't working; need a H2O supply regulator. Incoming PSI too high. Plus, I've been wondering if I could hook up a 5 gallon soda keg inline to provide more volume, if needed. Looks like it's easy. I was stressing over all SS fittings for my hoses, etc. Then, I slapped my forehead as I looked at the brass pump & fittings. I bought SS, if they were readily available & not 10x's the $ of no lead brass, otherwise bought nylon or no lead brass. Plus, it's highly likely the inside passages of the CO2 regulator are brass, w/ nickel plating only on the outside, if at all. Just don't use unknown brass fittings, or anything that'll rust.

Just recently acquired a 1987 Snapper Hivac .not running. But with a little tlc its a great mower.

Thanks for the video. I'm still using the Snapper 307XS, which my dad purchased in 1968 (I was 10 years old then) for me to cut the lawn with. I am on about the 7th or 8th engine replacement so far. Just finished refreshing the differential, chaincase, boots, and did a general maintenance workover on it. I really like the simplicity of the design of the 307XS, as there are much less useless "safety" items on it. Common sense has now been supplanted by safety devices, as they just don't teach common sense anymore to the newer generations.

Dope ass mod 👌🏾👌🏾👌🏾

You can clearly see how inflation has affected quality and features what we get.