- 105
- 62 962
Thor Rasmussen
Denmark
Приєднався 15 жов 2011
TT01 RWD Test
TT01 3d Printed drifting test (first time driving a RWD drifter).
This is a car build with the kit that @zeusgarage4368 made, i am very pleased with the results and the performance on this kit. Do go check out he's wild channel! Everyone with a 3d printer and a TT01 should do this, seriously.
I substituted the parts i didnt have with 3d printed stuff i made in fusion, so theres alot of play in this car but it still performs amazing.
I didnt have the correct pinion for the car either so i got a file and printed one, im amazed it has taken all this punishment. I drove for 40 minutes filming this on 3 cells.
All the parts are printed in PETG.
This is a car build with the kit that @zeusgarage4368 made, i am very pleased with the results and the performance on this kit. Do go check out he's wild channel! Everyone with a 3d printer and a TT01 should do this, seriously.
I substituted the parts i didnt have with 3d printed stuff i made in fusion, so theres alot of play in this car but it still performs amazing.
I didnt have the correct pinion for the car either so i got a file and printed one, im amazed it has taken all this punishment. I drove for 40 minutes filming this on 3 cells.
All the parts are printed in PETG.
Переглядів: 514
Відео
Synthesizers and a 4Runner
Переглядів 784 місяці тому
Finally fixed the 4runner, it did not like the drive in the snow, see my previous video :D But decided to take it out for a bit of footage before i break it again. Its had some updates since last, terraflex shackles, different leaf set up, 35 kg servo and a hobbywing fusion 1800.
Pajero trip to Skelhøje
Переглядів 5825 місяців тому
Went out with the silverbacks crawl and trail club to the Skelhøje mountainbike trails, allways good fun.
Chill crawling saturday.
Переглядів 1747 місяців тому
Met up with a buddy at the Silverbacks testing grounds, did a bit of driving and showing off the area, was good fun.
NATO cruiser - another chill trail video
Переглядів 1,1 тис.8 місяців тому
Another chill trail video from yours truly, i really enjoy making these. New Truck! Another trailfinder 2, this one has a 2 speed and is a LWB. Hopefully in the future i can get some friends along with me for a recordings sesh Music is some royalty free synth stuff.
Chill snow Trail - RC4WD 1/10 Toyota '85 4Runner
Переглядів 23410 місяців тому
Took advantage of the snow that came down on Denmark! Trucks still pretty stock besides the wheels alot of rubbing going on. Music from #Uppbeat (free for Creators!): uppbeat.io/t/oliver-massa/voyager License code: QRVXHGVCTXPXHZ5W
TRX4 Bronco - Recon in Gjern Bakker
Переглядів 623 роки тому
Went for a tiny recon run in a nature area close to me called Gjern Bakker.
Hello from pcb discord! Looks so fun, don't have that type of stuff where I am. It's all very fine sand and looser dirt
Good
Nice one dude😉🫠👌👍
How much wider is it at the front? I recently installed wide angle steering arms on my TT01. Improved it but not as much as this. Nice. Good old chassis.
I'll have to measure it, i made a whole recording when i got back home from this trip but i couldnt stand my voice on recording. But ill explain what i did here instead. Cars a free chassis that was handed to me from a friend lol, it was used as a spareparts chassis so there was some stuff missing. For a while ive been watching videos on 3d printing rwd conversions for tt01's hoping id find something that would fit my TRF. This is a 3d printed kit from Zeus Garage, you can find him here on youtube, very detailed build videos. He has some specifications that i set up the car with, and i used other 3d printed parts to substitute what he used i didnt have :D, so its not a pretty home made set up with alot of 3d printed parts. Im amazed it drives that well tbh, but thats not on the author of the parts more down to my substitutes. It has alot of play in the steering :) This car is on a 3d printed pinion gear, and it survived 40 minutes with a 3 cell.
@@Yurisminator-RC Good you saved it. Free is always nice 👍🏻 I watched the Zeuschannel too. Amazed how people can design these parts. My steeringarms are printed too. Wanted to see how far that got me. Locked rear differential and RWD. I am an absolute noob when it comes to drifting lol. Decided to keep it as it is now. Put some slicks on it so my daughter kan enjoy jumping it in the skatepark. Got a used HSP chassis. Going to tinker with that. You can mod that thing low budget with a few pieces of plastic. Starting there. Just for fun. The Tamiya was in the attic a long time. Enjoy it mate.
The steering response of my TT01 is very emotional! Very sensitive, no gradual turn
I use a bigger wheel on my radio, it gives me more steering input, this car is also converted to RWD with some 3d printed parts :)
So viele und schöne Autos in einem langen Video - kann nicht besser sein. 👍👍👍
Thank you :D i hope to do alot more in the future :D Maybe a bit more scenematic :) because of all the cars and me also driving the black pajero i didnt have too much time to film very well.
Hvor købt du den henne champ..?
Tamico i tyskerland ;)
Fantastic looking truck, and video! Can I ask for the info on wheels and tires?
Rims are boom racing Kraits and the tires are also boom racing but max grapplers, I'm using them here while my 4runner isn't driving 😊 it didn't like the snow alot 🙄😂
I'm always up to the Jeep action video🍿📺 Good looking car and nice action video👌👍👍👍😊😊😊
Really nice performing pickup! The forest looks super cozy. Seems like a perfect day! Cheers!
Beautiful 4runner! Nice run! New sub here👊
Thank you 🎉🎉 😁
My dad bought an 1985 4Runner new in late 1984, I miss that truck, it was a great truck... Where did you get this RC model?
I got it from a webstore in German, but it's a fairly common truck 😁 Rc4wd is the maker and the model is a trailfinder 2 4runner version, there's a couple of different kits 👍
nice video😍😍😍
Thank you 🙏
It's a toy bro 😅😅
Men don't stop being boys, the toys just get more expensive 😂
Send link skin sir?
This is a really great tutorial thank you man
link car? pls!
Very nice👍
links car plz
car link?
Spiller du stadig assetto Corsa ? ;)
Maler nok mest i dag, men jeps!
@@Yurisminator-RC maler ? Er det bilerne du maler ?
track?
Kicevo, paid free roam version, has a cool little section in the middle
the file of template don´t working,could upload again,thanks
how do u do the colour cause u dont have the pre made color you have as i am doing different car?
Is that car for assetto
Link to your Facebook group plz
please update link!
thank you you are amazing.
Super cool Thor . Har du nogle Helmet/suit/templet til assetto corsa?
how to find this on a car that i downloaded??? are u danish?
very nice skin. Are these paid livery ? Or do you release them public ? Thanks
I mostly just do them for my self or for friends.
Great tutorial man, thank you :D
sticker link not working, fix it please
Need a new link for the stickers please. Link don't work
The sticker link dont work anymore, can you make a new link
Dope ure drone shoots in VHS format
Haha yeh that drone is awesome :D
asmr hand rubbing
Noriyarō that Aussie dude who lives in jpn hahah cool tutorial by the way. 👍👍
That s13 from DTP mod?
pixelsamas kamikaze works
Thank!
The master of liveries
Legend
skin looks really good!
Hey, can you please send me the .obj file? would appreciate it a lot!
j Gurtner the video is quite old and that obj file is gone.
damn was hoping you still had it
What is ure steam bro. Would love to slide with u. Im kadir from discord
I'm having some issues with getting skins into assetto, would you be able to help?
James Egan hey buddy, what's the problem?
Thor Rasmussen is there something I can message you on, it'd be easier
James Egan try facebook I'm Thor Porup Rasmussen
I really like ure content. Ive seen that u have liked my video tnx bro
+rep nıce texture :)
How do i skin the window?
Wizard it depends on the car and you need the window template I'd suggest you check out the street heroes cars they include window templates it's basically the same
Love Big Poppa in the background!
Mate are you using Winamp? That is awesome