Відео

Good review young man! I have had mahindra 1526 1626 and Branson 2515 all great tractors in different ways i only have 4 acres i run finish mower bush hog box blade do odds n ends for neighbours. Just bought a ck3520se shuttle shift two weeks ago only have 18 hrs on it but dearly love it it's a totally different machine than the others which is 10 more hp which made a big difference. Hope ya'lls tractor does you well. Thanks for sharing be safe have fun

Nope.

I had the whole set up for Aluminum and after 3-4 years I got rid of it because when you tell the customer the cost to weld Aluminum mobile they would freak out. It seemed to attract cheap customers. It was always be can you weld my bike or my cheap trailer….

i blew the same o-ring but replaced it myself as I didn't have time to take it back to the dealership. I now have 221 hours and mine still runs perfect. If I could do it all over again I would get the manual gear as the hydraulics is loud, it wines terrible, and lacks power.

Lincoln knocked it out of the park with mpx. Crazy quite and the inverter power generation makes for smoother welding then traditional power generation.

The only holding back is the dealership almost 2 hours away. Kubota and Deere are in my town.

I guess I’m confused. I can get a kioti ck2620 or a Kubota lx2610 for the exact same price. But the Kubota has a mid PTO allowing for a belly mower in the future. Also comes with floor mat, and other stuff that are an upcharge for kioti. I cannot seem to wrap my head around the hype

Never going to happen unfortunately for kioti!!! Kabuta deere own the market here in Canada warranty, parts, dealerships and turnarounds there is 81 kioti dealers over 200 kabuta and 300 in deere!! Don't be fooled. Just saying.

A friend of mine has a kioti and he says he wishes he bought a kubota instead, he says theses things are junk….

I have the new version in the cab model. 108 hours in four months. Had two hydraulic couplers leak (switched to two new ones) and that’s it. I researched for three years before purchasing. Kioti has a big following in my region of Canada.

The 4030c loader is rated by kioti at 1960 pounds at the pivot pin.

A good dealership is 90 % of owning any machine.

In this segment Kioti CK is destroying the Kubota standard L series. Kubota doesn’t offer a cab in this chassis size. You either have to go way down in size/weight to the LX series or way up in size/weight/price to the Grand L series.

found the same thing with the kubota dealers up here in canada, also they have gotten way too expensive since the scamdemic, good luck with the kioti

You should try to point your exhaust away from your back window. It could cause it to shatter from exhaust heat.

Is this AC/DC??

A set of Oxy-Acetylene bottles would rate higher than an aluminum spool gun. Next, your Tig torch isn’t a “Tig welder”! Your Lincoln is a Tig welder as well as a generator and SMAW welding machine. I would say that having a Tig torch would rate at number or 2 depending on the type of welding you do. However, in order to run your Tig torch, you not only need consumables, you also need 100% argon, and if your job is more than 15 feet from your work, you will need a gas line equally as long as your cables, and a remote for your welder. Next on the list would come your mig welder, which will also need mix gas, or maybe 100% CO2. I would choose C25 myself. C15 in a pinch. Unless you’re using gasless flux, which in my opinion is garbage. Thats 4 bottles, which we haven’t seen or heard about. What is equally as important to your welder, is the ability to process material. Without that capability, you may as well leave your welder at home? A saw is ok but not capable of everything, especially in the field. Oxy-acetylene is great, not only for the ability to process material, but for the ability to pre-heat anything bigger than 1”, less than that depending on ambient temp. Propane is better, but that makes 5 bottles for everything you’re carrying. If the area you are working in is covered in snow, or well below freezing, you will need to clear of and melt snow and ice. You have a lot of nice gear, but you definitely need a lot more stuff to make all that work for you. Edit to my comment! I almost forgot, that machine is capable of quite a bit. So a gouger is a must. Carbon arc gouging will save you valuable time and money. In order to operate that you will also need to be hauling around a compressor. Fit up and install a welding skid, customize it however you want, but keep in mind everything you need to operate your mobile shop. Leaving room, and making accessible spaces for all your bottles.

Dude, your connectors are called “dinse” connectors. Tweco is an ESAB brand. You won’t land a Lincoln sponsorship if you keep shouting out ESAB.

Thanks for the vid. I am in NH and recently picked up a CK3520. I was planning on the 2620 (for the same reason, no DPF), but after considering and hearing about how solid the DPF technology is from Kioti for regen, I bumped it up. 7 years 0%, cannot beat the deal, it's a great time to buy a tractor. I was originally planning on Kubota, as I had a little B7510 with a backhoe and was going to trade it in. I go the dealership, stand around like wallpaper because no sales rep wanted to look up from their monitor. I leave, go back a few weeks later and corner one of the reps, tell him what i'm looking for, he points to a used 35HP Kubota with like 600 hours on it for the same price tag as a new Kioti (with warranty for 6 years, unlimited hours), so I go to the Kioti dealer. I am now talking with the dealership Owner, he's giving me undivided attention, walks me around the yard, shows me attachments for moving snow, grading roads, etc. I had to stop him from talking and said, "sold". Only have about 20 hours on it so far, but it has been a beast. Does Kubota make the best gear? probably. Does it matter for me? not really. Kubota just doesn't need to sell any more I guess, just take orders from people because the brand sells itself. I looked at Mahindra also, but the Kioti seemed to be a better machine with better reputation for warranty service.

I have the same version only it's a 260. Worst welder I have ever owned something with it all the time. Ran for month then no power sent it back to Lincoln got it back they never touched it sent back again ran for 2 months and the control knob switch failed. Waited 4 months for the part back going again. Now 4 months later quits welding after 15 mins still have 115 though. So I have had it with this one going back to a 225 without that screen setting garbage. I have 150 hrs on it.

Do you have a website for the type of work you do?

I currently have a miller big blue 300 pro. a 400 amp welder and for me it’s been a god send. I studied that welder for a bit and that is a great multi process welder. Enjoy yourself make your business grow and keep advancing! God bless you and yours!

I dont understand the title of this video that only provides one person’s anecdotal evidence and not market statistics. That makes this clickbait.

When you are welding in the field what kind of gas are you using with your wire feeder active 8x? and you don't get any porosity when welding outside with it?

good job. learning about tractors myself.

I think the Kioti gives you alot more for your money than the Kubota, also they stand behind their tractor more than Kubota. It's built better, much better ergonomics, and better price.

Where are the spark plugs? I’ve been trying to change them on the welder at work and can’t find them.

I’ll save you all some time, the answer is no

I have a CK4010Hyd and had the same o ring issue. My dealership recognized it immediately and fixed it. I think that is is a common problem.

I've been comparing a few different models and for me it comes down to the Kubota L4600 and Kioti DK5810. So far the kioti does have a bigger lift capacity on the loader, more powerful 58hp turbo diesel engine vs 46hp aspirated engine but the Kubota does have a higher output PTO. And the Kioti is around $2000 cheaper. Il still torn but am leaning toward the Kioti purely for value for $$$$..... any suggestions are welcome.....

Sorry bud I see it’s a Kioti I have a Kioti 3520se with shuttle shift gear drive. I love it so far!

What kind of tractor do you have. Is that a Kubota or Kioti?

4 years using for structural steel welding that 330 MPX, non EFI, I’ve got one of the first machines. No problems at all. Using 10w30 Castrol oil, all Wix filters expect the air filter ( could not find it in Wix). Don’t use Kohler please.

The dealership where i bought my kioti is selling them faster then they can put them together

Great video. I have a 07 Kioti CK25 with a manual transmission. Even though I have an older Kioti, I think the layout is well throughout. I mainly use mine for mowing.

Kioti best tractor for the price from Canada🇨🇦

I got a CK 2610 just like yours. With R 14s. Love it 👍👍

Can the American flag fly high looks a little low -Nice Welder!

appreciate your videos. I've enrolled in a welding course at my local vocational school with hopes of working in the industry, I'd be interested in seeing a video about the different jobs you do or are available to welders in general.

I did not buy the kioti. They were not much cheaper than the the kubota and offered no financing incentives when i was ready to buy. I did notice used ones always have a new hydraulic pump and there is no line forming to buy used ones, whereas Kubota and John Deere used tractors seem to be a myth as you sure can't find one. Any off brand is going have service and resale issues. Didn't buy the Mahindra because of Mistubishi motors. Buy one, you'll see first time you need a part. I recommend sticking with the major players.

Well as a retired Cat&Cummims knuckle buster I was a question when GM introduced diesels to the mainstream public. My reply was the happy home owner isn't ready! Because the average JOE doesn't know or understand PMs!!! ( PREVENTIVE MAINTENANCE ) As for the little tractor market there all coming from across the pond. What I see is the tractor market is doing what the auto industry is doing. Whisles & Bells sell!!! EXAMPLE PICKUPS TRUCKS TODAY THEY ARE FOUR DOOR SHORT BED LUXURY!!! As far as Kubota being better !?!?!? They all build LEMONS!!!

I have a 2021 Kioti CK 2610, and it has been flawless. I have had 0 issues with this tractor, and I have around 280 hours on it. I have used it in home maintenance, agriculture, and everything in between. It’s just been a great little tractor.

I thought Mahindra was an affordable reliable machine, So check on availability of parts for Kioti, like Mahindra if you need a new part or parts you’ll have a lawn ornament for a few months if not a year

i wish they made a ck2620se rops shuttle shift....

how much are the chinese circuit boards going to cost when they burn out and will you be able to get them?

I dont have a dedicated mig welder in my shop currently. Im trying to decide between a miller 12vs suitcase or a miller passport plus which is the 211? I believe inside of a suitcase type housing to be more durable. I dont do much mig welding yet but Im getting info on some up coming jobs that a wirefeed would help tremendously

When I started researching to buy a tractor, all things pointed to Kioti. I was sure that’s what we would end up buying. All that changed when I actually went to dealers to look at the tractors. Kioti’s craftsmanship was clearly inferior to Kubota. I was absolutely shocked when the quote I got from Kioti was only about $800 less then I got from Kubota. $800 more was well worth going with the Kubota. I couldn’t be happier with my choice

Nope

I dont know if they are any better both have good and not so good points. But I know I can find Kubota parts a lot easyer than Kioti's

I have a Bobcat 2540 (cab 40 HP)(Made by Kioti) I have 120 hours in 6 months. No problems with Tractor. Dealer installed a sat. Radio and it didn't fit in factory brackets , so they jerryrigged it. Service and sales at Indy Bobcat was super. They drove 70 miles to me to pick it up and fix radio problem, they delivered it back to me in 24 hours. Excellent.