Відео

I agree completely! Case makes a damn fine, reasonably priced knife that was meant to be carried and used. If you dig them and want to collect them, cool, but that doesn’t make them what they aren’t. They’re mass produced, and in my opinion, just right for what they’re designed to be - an every man’s knife that gets the job done (while looking pretty slick at the same time).

Hey man how much would it cost for u to make some elk handle knife scales like this except for the v44x. I said elk because i figured the base of the antler would be big enough for u to cut the shape but what ever bone u think would work. I would perfer to have the dark spots left on like these ones. But yeah if u can do it, leave me some contact info or how ever you want to communicate. Thanks in advance and no problem if u cant make them.😊

What oil are you using to clean and flush?

I love Lons work, the blacktail is a great edc design

I have the Case large stockman and Sowbelly in crimson peach seed and they are nice quality no complaints. Case are more affordable than GEC which are nice, and I own a few Great eastern cutlery knives but I just cannot afford to buy them anymore even if I can get one when they drop on sale. So, I am with the Case knives now I can buy one without the hassle and high price of the GEC knives.

Nice looking knives. Funny, I use the same tooth picks to clean mine out as well. The Dawn soap works well when cleaning and restoring an old knife with a lot of gunk. It breaks residue up, making it easier to remove. Have a great day!

Nice trappers. I do basically the same thing with the addition of a few shots of air from my compressor. Do you have a video of you adjusting them?

🏴‍☠️

So I pick up a Sod Buster Jr, and only give it a quick check at the store. I get it home, and notice there are very light scratches all over the blade. The scratch marks go the same direction on each side. I then notice the brass liners have the same scratch patterns as the blade. Both of them... My best guess, is that before the bone covers were added. They somehow mashed the liners together on accident too tightly. Then pulled the blade out, while it was like that. Scratching the liners, and the blade in the process. They fixed it, then boxed that up and sold it. The one they had for a display piece at the store by the way, had zero friction to go along with the folding aspect. Case does make great knives, I got a couple that have zero flaws I can see. I just question what they are willing to let out of the factory at times. I don't even care that much about the scratches, but they should, y'know?

Sorry about the noise ... its the a/c

I bet that will work just fine.

Looks good.👍

I think you're missing the point! Case has been around well over 100 yrs.! And the quality of their knives has been superb! The fit and finish top notch! But in the last few years their quality control has slipped! I've seen vids and talked to people that have had issues with their Case knife! And that is a valid point, even if it's 1/2 of 1%! I personally have not had an issue with any of my purchases from Case! So maybe they need to up their quality control, so they will continue to be a great factory knife producer! That's my take on the issue! I still will buy Case knives as I have for the last 50 yrs.! 🤔👍

Have several case knives. Pretty good quality and they made in America!

Thanks Mighty, you and Doom are spot on with your observations. We done!

I just wish Case would put an actual POINT on their traditional folder blades..sometimes they are really rounded over....my only objection for the most part.

I agree 💯 and if it’s that bad you want to complain about it send it back they will fix it for you for free!

Case is still better than Rough Ryder and I have both. The quality issues with rough Ryder are more serious than slight gaps etc. instead you get blades that hit the liners dinging the edge and proud blades. Case might not have all of them straight down the middle with no gaps but they don’t ship unsafe knives. Remember you’re getting the best looking bone covers made on a fine quality knife for a very reasonable price for USA made. Want perfect USA made knives then pay three times as much.

Totally agree and you even changed my mind on somethings too. Thank you for helping me see the bigger picture. All great points and a much needed discussion in the community. Case has had some issues with quality control, but every company has that. If people are comparing old Case quality to new Case and saying they've gone down hill, that could be fair. However, I would say older knives were built better, in general, than ones made today. I know people compare Rough Ryder to Case and say Rough Ryder is better quality. From a quality control standpoint I've had the same amount of issues on my Rough Ryder knives as I've had on my Case knives. And Case uses better quality materials than Rough Ryder does. Rough Ryder are cheaper, but you get what you pay for. What does bother me about Case is they changed from using stamps to using etchings on the tangs. I'm worried about it possibly rubbing off over time. In the end, Case still makes great knives. They are not only collectible, but wonderful users as well. Sorry that was a bit of a rant. That gun fighter Bowie is awesome by the way! Great video and thanks for sharing! Just subscribed!

The point of Case Knives is everyone is capable of affording a nice quality, good looking, functioning tool that will last a long time with the colors, bone etch, and pattern of your choice. Affordable enough to be in every man’s pocket!

Not only have I been happy with the Case knives I’ve purchased over decades; I’ve been very satisfied with their customer service when I have had issues with a knife.

I believe that most of the people putting down Case are ones with boxes full of China copies of Case patterns. GEC Fanboys are another Case hater bunch. Price wise the difference is double for buying GEC because of low knife production numbers. Case makes premium knife short production runs the same as GEC and cost more to own. Their short premium knife runs often out shine GEC and cost less too. No one makes you buy Case knives, so why do these Case haters keep buying them? I want an answer to that question first. ⁉😆😅🤣

Stated it as it is! I'm with you brother; these Case knives are amazing for the price, and American-made.

Case knives has dropped quality and I understand why some people would be mad it’s a USA product so you expect quality

Real talk!!! New follower here...

Great points man!! 👍🏼 Just sub’d!

You can call me buddy, or heck even Brother! Thank you for the supportive video response!!! Big J showed me this video!! And I’m glad he did! Just subbed! You made great points!! Why can’t people just enjoy stuff? Thanks again!! I appreciate you! Definitely be seeing you around!

Great points here man!! I have 78 Case knives and all are acceptable for what i paid. Makes me wonder if they will ever use them to do anything constructive. I love a CS Blade and love the Patina so why does a 1/4 mm gap bother anyone?? And if it's dull just sharpen it, easy fix!! Thanks for this response, doomcrew is a great friend of mine, just subbed!!

Gorgeous blade!

Nice get. There probably aren't many like that floating around. I enjoyed the comparison as well. The Kabar blade combo is probably my favorite. Thanks for sharing.

Beautiful knives! I just subscribed!

Great video! Crazy that you pulled the same Kabar and then brought out that smoke show Case!! Thanks so much for joining in on the fun and tagging me, I subbed!!

WOW! The geometry on that knife looks like it would be good on everything. Utility, Woods, Office, Church ✝ Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲

Super sehr schön 👍👍

these knives are too beautiful to use at least I couldn't

Their customers claim they have waited for many years for their knives. It seems the company keeps accepting new orders without shipping or refunding existing ones.

Can't wait for them to make another run of these.

Looks badass! I'm still waiting on my GSO 10. I hope I like it.

Are those in CPM 3V or CPM Magnacut? I'm curious to get my hands on one of the Magnacut models.

How long ago did you order it? I ordered a 5/1 on 9/22 and am still waiting!

Gorgeous fixed blades.Would love a 6.5-6.75 inch blade version.

Very cool

I meant to say hex bits...lol and it does have a magnet to hold the bits in..

Don't feel bad. My 5.1 gave me a gash lol. I didn't think I'd like mine much until I held it. Now it's my favorite.

How long did it take to get your knives from time of order?

Glad to see some people are getting their orders...

Nice looking blade

What a sweet knife brother! I can't wait to test mine out soon!

Do you have to re-zero optic after changing the battery? That seems like it would be very tedious and a pain in the ass! You would think the battery would be on top of the device.

Nice vid my trucks red two ! Ordered some pods as well 💯💯💯🔥