Відео

hello, we did this to ours, but no its not starting, startermotor is not responding on the turn....

can you list the exact wire and tools needed and where to buy?

Help!!! My steering wheel unlocked, taking fuse 18 out does nothing

Sparking your terminals in that fashion to see if it’s switched on risks frying all your electronics. That hi-end charger had plenty of indicators on it to inform the user it’s charging. Also, unplug or switch off the charger before removing the crocodile clips. If using a jump start pack make sure it’s big enough for the 4.3 v8, many will not have sufficient power to crank such a big motor.

Fumbles about and doesn’t seem to know what he’s doing, just say’n.

I did the fuse & the harness & still doesn’t work. Mines stuck in the unlock position

what color ?

Did this fix it no longer locks but now won’t crank over what did I do wrong?

What gauge wire is needed? Can you share a link for the wire crimp parts?

And what to do when the middle bolt won’t come loose from the steering column and is stripped?

Thanks for the tip, it has work for my l322!! Its funny how its Always a suprise when it works😂

Thank you for your video .

For anyone trying this , solid blue wire at the steering column and the striped one by the light. Saw that no one answered the question and I had to trial and error to get it. Good luck.

Did what video by pro key turns started once now will not start yet key turns

Subscribe to you because you’ve got more fixes coming on your channel? When are they coming? After you watch someone else’s video and duplicate it. The truck has nothing on you? You mean has nothing on the persons video you copied. At least give the man credit seeing as how you did a horrible job explaining which blue wire… this way the people that need to bypass this doesn’t go chopping up the wrong wires and not sealing the first wire they bit into to prevent corrosion which is a huge issue with these vehicles due to all of the moisture in them. L322 has everything on you. This is the most amateur way to do this repair and a good way to make sure you’re completely stuck when the wire fails over time because you don’t have the tools on you to remove the cover. If you’re not going to do it the proper way and solder it, the at least, at bare minimum use heat shrink but connectors to ensure there’s no issues with the wiring in the future. I’m not hating by any means… customer comes to my shop for repair and I go in and I see something like this and ask him where they learn to do it and they tell me UA-cam I can’t help go look at the videos and see who is causing this madness… there is a reason why the original content creator recommended soldering the wires…. Because it’s the RIGHT way to do it. Like I said I wouldn’t have had an issue or me to comment at all. Had you not acted like you came up with an easier alternative… your excitement clearly showed that this was your first time doing this, and that you clearly memorise what wires the cover from the previous video or Splice into super perform hack job. The excitement displayed was the excitement of someone, not sure if it was going to work or not and to their disbelief. It worked. Let me know when you copy your next video so I can be sure to explain to you how you fuck that up too. Sure the people that get their car started are going to be happy and thank you but eventually when it fails and given enough time, it will fail. Then they’ll understand. There is a reason these type of connectors arent in vehicles from the factory. Or why no service manual ever will you see it recommended for you to do this.

Здравствуйте. Помогите пожалуйста!!!! В морозы машина стояла 10 дней, запустил её, она поработала 15 мин и заглохла. Причина была что подвисли клапана, из-за этого не было компрессии, подняли компрессию слив масло с двигателя -разогрели и залили, и по не многу масла в отверстия куда свечи вкручиваются залили, акб ставили с зарядным устроиством на "Пуск" и крутили, в итоге появилась компресия , клапана встали на место, машина заработала. Но это был последний день дома и мне нужно было уезжать в командировку на 30 день, как приехал, пропала искра. Ток(питание есть на катушки, а как начинаешь крутить стартером то пропадает. Ключь зажигания вставляется и крутиться и зажигания горит но стартер не крутит. Я стартер кручу замыкая реле стартера. Датчик коленвала новый поставил. Датчики распредвала из-за них искра не пропадает, из-за них плохо запускалась бы и временами глохла. АКБ новый. Свечи новые. Думал имобелазер но тогда наверное ключь бы вообще личинку зажигания не провооачивал что включает зажигание, а может защиту и дает что искру блокирует. Помогите пожалуйста, всю голову сломал, уже не знаю что делать. Сдался я. Рендж Ровер м62,4.4

Hi. Please help me out. I was doing on my wife car is 2006 hse. But if I lock the vehicle the interior light is on Please let me know what I was doing wrong?? Thanks

Thanks … was in the same state . And it helped me to start our toy Ferrari.

It works!!!!!

Do you cut the wire in the steering column or do you just splice in another wire to it?

Sweet baby Jesus! I have to try this

For almost 2 years, i have been messing with this problem .delarship couldn’t fix .now i watch 3 times your video times times, and i have a plan to try when sunrises .but it does make sense

Tried it but rover wouldn't start 😅

I think is cheaper to burn it and buy a Toyota Landcruiser.

I believe I'm having the same issue,i just bought one & it's not starting.the guy i bought it from is saying that everything comes on but it won't start.i took it to a repair man & he thinks the transmission has gone up because the truck won't lock into park.

I’m trying this hack. On the dome light, which is positive, the red wire, or the brown wire? At the steering column, I have 2 blue wires. One blue wire has a black stripe. Which blue wire do I tap into? Thank you for your time.

Will it work for my 2003 HSE ?

Yes but ohh

Bonjour , la lampe a deux fils un marron et lautre rouge stries bleu c'est le quel je dois choisir, cordialement

Do you happen to recall the gauge wire you used?! I think mine was alittle too big for the application.

Hello thank you for the video, can you tell me the color of the cable at the top and that of the cable at the bottom please

'Promo SM' 💋

Mr here are three blue wires, which one? Also on the other end where the light is which wire? Thanks

anyone tested with a bit newer l322 ? where ignition lock is next to steering wheel ? is it same procedure ? having same issue with key not turning, steering wheel is in unlocked position so i guess lock doesnt receive signal from steering column..

Hi Robert. Is it possible to message you regarding your car? I'm located in SoCal.

Hello someone please help me my column its not blocked but my car she not turn nothing, I put new baterry but nothing.

Hello my car already has a button on off attached to the fuse, if i take a wire from the light and join it with the button will it work?

Came across this video. Like the way you described and fixed it. So subscribed at once

all this could have been avoided with a 2ndStart Battery from LithiumMoto with wireless remote auto-jump starting feature.

Advise to people who need 9 min long instructions how to use torx screwdriver - leave it to professionals! The rest can start watching from 9:00

Does it work when the doors are shut

hey my over heated and now it won’t starts all i hear is the starter what should i do the bult is spinning

I tried this , everything looked good all lights on dash but no start now,nothing at all??

How did you solve the fan problem? I’m having the same issue with my 2014

Do you recall what gauge wire you used for this?

Great Video Bro!

You don’t tell us which wire has to be connecting on the steering column which color

Awesome video and presentation. Thanks for helping to keep us passionate L322 owners on the road

does this work with a 2008

We did the same process but the car doesn't want to turn the key