- 3
- 130 768
Nikola Svilar
Приєднався 4 сер 2014
Microtech Jagdkommando
You can find this 3D model and renders here: grabcad.com/library/microtech-jagdkommando-2
Переглядів: 27 702
Відео
CSWP Segment 3 Sample Exam 1 HD
Переглядів 43 тис.9 років тому
This video shows what you need to know to pass CSWP assembly segment exam, and some tips for faster modelling You can find another video of CSWP segment 3 here: ua-cam.com/video/qsNYn8LJ7RY/v-deo.html You can find PDF document and existing parts here: grabcad.com/questions/cswp-segment-3-assemblies-preparation You can also find existing parts here: grabcad.com/questions/how-to-prepare-for-solid...
CSWP Segment 3 Sample Exam HD
Переглядів 60 тис.9 років тому
This video shows what you need to know to pass CSWP assembly segment exam, and some tips for faster modelling You can find another video of CSWP segment 3 here: ua-cam.com/video/ZW2gu2LWp5k/v-deo.html You can find PDF document and existing parts here: grabcad.com/questions/cswp-segment-3-assemblies-preparation
I passed the exam. thank you
You works well. I'm a new subscriptor!😜
Поросят резать пойдёт
great video thanks for sharing
Greatest tutorial series for SW I've come across. Nice job 👍
I spent one hour to find a mistake in my model from question 1 relative to the wrong value Z for the Center of mass in question 2. Now you telling me that PDF is wrong. Wondering why like that if that is the official sample? Anyhow, tomorrow is my test day so wish me a bit of luck. Thanks
Did you pass?
@@shahedmarleen8757 Yes, Long time back
@@DR.BELJAN Glad to know that. I will be taking mine tomorrow. Any suggestions? About the new format?
@@shahedmarleen8757 I'm not sure about new format as I pass test 3 years ago. Good luck
@@DR.BELJAN Thank you for your quick response. Appreciate it.
Thank You !!!
Thank you again for another assembly segment. Answer for 5th qn differ by 0.01 for me. Thats all. I am consuming much time, about 1 hr to complete this segment, while you just finish off in 40 mins with explanation to the procedures. I think you might have completed your assembly segment for exam in less than 30 mins. Well i have to practise more atleast to break your 40min record😄😄
Thank you. This is the most effective tutorial for cswp assembly section.
Thank you for the feedback! I am glad you liked it
Thankyou for the explanation, component part, and the pdf document :) Here's all the answer from the video, so you don't need to find it one by one on the video. 1. 562.80 grams 2. X=5.00 ; Y=9.76 ; Z=-86.96 mm 3. 54.47 grams 4. 94.24 grams 5. X=5.02 ; Y=15.80 ; Z=-86.82 mm 6. 35.79 deg ree 7. X=4.11 ; Y=30.20 ; Z=-98.36 mm 8. X=4.30 ; Y=35.07 ; Z=-98.07 mm 9. Arm_slot-1 ; Arm-1 ; Housing-1 ; Pivot-1 10. X=13.00 ; Y=37.66 ; Z=-105.66 mm
Thank you very much for the documentation. Currently, I´m preparing for the CSWP, but it´s not easy to find samples about part of ensambles.
I am glad this helped. Good luck with the exam!
***I passed the CSWP with 100% on all 3 segments using these study flashcards*** ua-cam.com/video/zJXQxtx5e4s/v-deo.html
***I passed the CSWP with 100% on all 3 segments using these study flashcards*** ua-cam.com/video/zJXQxtx5e4s/v-deo.html
11.20 fram e det du söker.
Thank you...
Amazing tutorial I must say!! Thanks for your help. Easiest one to completely understand new things I was trying.
Thank you for the great video! I have struggled to find practice material for these exams. I just took mine and passed. I wanted to leave a comment for the people who are preparing to take this exam. I will say I think my exam was more difficult as it had 14 questions with 80 min; however, the exam format might have changed in 5 years. Try to study all of the advanced and mechanical mates (I had a question where i had to use a gear mate and a path mate). Also, my exam did not have any modeling like his practice tests do.
Congratulations for passing the exam. Thank you for posting about your experience, I hope it will help other people who are preparing for the exam
Thank you for the info! cheers mate!
I agree
Unsure how to do the distance mate at 18:25
you need to make a reference point or axis on the center hole of the arm. You can also just select "view temporary axes" under the show/hide feature and use that axes.
Dear sir, can you do me a favor? i have done exactly every step that you did, but i can't get the angle while collision like you-35,79 degrees (23:57 in video). At first i got 35,82 degrees, another time i got 35,87 degrees. Please tell me how to fix that and is there a limit of tolerance with the measurement angle in the cswp test?
I used SW2014 Premium in this video, and you are probably using newer version, so I guess it can be a reason for slightely different results due to some calculation differences in software. It is strange that you get two different results, try to slow down mouse pointer before collision to give software enough time to calculate everything. So try to find unique answer for your model. Differences between your(35.82) and mine, don't sound too big for me, but I really have no idea what are tolerances in the cswp test
Hi Huy. I also get that sometimes. I figured most of the times it is unit decimal error. make sure it it set to 2 decimal points. aslo if u r using 32 bit version of solidworks instead of 64 bit, u will get slightly different values.
Great video. I just have one question, the 8mm offset that is 6x6 is 3mm from the top of the leg and not centered in the drawing. (If it is centered it will be 2mm from the top of the leg.) Is this a mistake in the drawing too? Thanks again!
Thanks for your feedback! Not sure if I completely understand your question but the 6×6 segment is 2mm from the top of leg(and 3mm from the center of leg) and is centered, so I done that exactly the same as it is shown in pdf, I consider that as correct
great video Nikola! Do you maybe have a video for segment 2 ?
Thank you. I haven't made video for segment 2 because you can find some good tutorials for free on internet for that segment. Back then in 2014 you really couldn't find complete tutorial just for segment 3 and thats why I decided to make these tutorials
One of the best SW video i have ever seen in the past 10 years!! Kudos to you!!
Thank you very much, I am really happy to hear that.
Most effective video I have ever seen. Thanks a lot, Bro.
I am really glad you liked the video. Thanks for your support!
Thank you. Was very hepful
Glad to hear that! All the best!
17:43
It is fantastic but sold out. The ad is pointless. Don't you think?
I noticed when you made the base it does not look exactly like the drawing when viewing from the top plane. I could be wrong but i believe you're meant to cut a small surface out of the circle before you create the arms
nevermind i watched you correct the error
Muje ye chaiye
thank you so much, I learned many tips from your video
For the real exam, are we required to create assemblies or download the parts to make assemblies?
di mana ada di jual mau belli brapa harganya
Answers question1: 3444,87g question2: X=95.68 Y=12.77 Z=-30.00 question3: X=96.04 Y=29.24 Z=-30.00 question4: X=91.09 Y=29.87 Z=-30.00 question5: 11,85deg question6: 117,32g question7: 358,19g question8: X=79.20 Y=42.03 Z=-30.00 question9: Arm_Lower, Shock_Housing, Piston, Knuckle, Arm_Upper question10: X=76.98 Y=44.04 Z=-30.00 question11: X=104.28 Y=37.82 Z=-54.23
This was very helpful. I had nailed the first two segments, watching only this video (plus years of actual experience) I was able to get a 190/190 on the 3rd segment. Certified! ;-) Thanks!
Congratulations on the certification! :) I am really glad to hear that you liked the video
Hi TurbineJesse could you please send ur exam model or questions as it will be helpful for me to clear the cswp exam
hello Nikola....u are the best im am studying with your help and its going very well. I have a problem....i cant find the pdf file for this exam? I did find it for your first exam on grabcad but this exam no one posted. Can you help me? Best regards from Slovenia :)
I am glad my videos helped you. I haven't noticed that there is no pdf file for the video, so thank you for mentioning that. You can find pdf here: grabcad.com/questions/cswp-segment-3-assemblies-preparation . I also put this link in the description now. All the best! :)
Thank you very much... all the best to you too :)
I'm new guy in the world of solid works so... you are very good whit your tutorial sinceritly congetulations you got a new suscribe ....I'll keep track of all your stuff best regards man from cd juarez mexico
Roberto Nevarez Thank you very much, I'm glad to hear that. All the best!
Great video, very well explained. Thank you so much!!!
lovely A Thak you, I'm really glad you liked the video!
Most helpful exam prep I've found.. (Passed this segment with 100% immediately after watching these videos)
I am really glad to hear that! Thank you for sharing your opinion.
it was similar to theses?
Hi Nikola Thanks for doing a great video. I followed this via the GrabCAD link and the file "Base_B" in this video is different from the one supplied via GrabCAD? Am I missing something?
Hi Wayne, I am glad you liked the video.Yes, you are right. At the first glance it looks the same, so I have never noticed any difference. But, for some reason, dimensions in the file from GrabCad are incorrect, so you will have to model the part by yourself. On the other hand, If I remember correctly, already modeled, original parts that you just insert in assembly, are OK.
Can you send to me the file (pdf) .This is my emailKhalil.ibraheam313@gmail.com
Khalil.ibraheam313@gmail.com
Mate you are a Legend! Great Job
Thank you, I'm glad you like my video!
that sucks, you have to unscrew it to take the blade out.
i think its safer, alot of people dont know how to handle blades and stick them selfs, fatal at times.
Como eu faso para ter uma desta
melhora o português que você consegue
Faço 🤦🏻♀️
Instead of using the origin at the centre of the arm, you can also use the centre of mass! Cheers!
You are right, that's interesting idea. It's also possible to make one reference point and use it instead. Cheers!
I have question, how did you get the deg of the draft in the circle boss extrude? because on the drawing, it only mention '105.00deg', if follow this dimension, should use revolve? Other question, i follow your procedure, and checked very dimension are match, but the mass at last was '3443.39' , different with yours, may u give suggestion, where was the wrong?
I was busy last days, I couldn't answer immediately, sorry. 1)Deg of the draft is simply a deviation of the edge from the vertical line, so i calculated 105 - 90 =15 deg. You can use revolve if you want, of course. The way i modeled this isn't the only way, it's just suggestion, or directive. 2)If you are sure about all dimensions, only two things come to my mind. Check if material properties are the same as mine. It is also possible that this mismatch appeared because you have different version of solidworks, so software calculated it differently.
Thanks so much!! i also watched your another video, love it. I am using education version 2015, i have understood what your mean.
Thanks for your great tutorial,just wanna to point out the correct value for the arm is 87.50 mm and its already updated in the PDF
SOMEBODY HAVE THE ANSWER FOR THE EXMANS SEGMENT #2... OR THE VIDEO.. I DO NOT FOUND IT. I WILL TAKE THE EXAM THE NEXT FRIDAY.
excellent video can i gain access to parts to practice
+K K Kenny Thank you very much, you can find parts and pdf with questions here: grabcad.com/questions/how-to-prepare-for-solidworks-cswp-certification-exam
at 18 minutes you can also use the mechanical mates "slot mate" and have it free in slot. its better than point on plane becouse that can move out of the slot.
+0sjors0 Yes, you are right. Thanks for sharing your ideas :)
Ako može kontakt? Moja adresa je 3dsolidmodell@gmail.com. Hteo bi par stvari da pitam. Hvala
Ako može kontakt? Moja adresa je 3dsolidmodell@gmail.com. Hteo bi par stvari da pitam. Hvala