- 11
- 149 782
Gina Talisic
Приєднався 12 чер 2015
Mercruiser 4.3 with internal crack
What a shame as she ran very good......and that's why I always check the compression and oil after running it for awhile just to be sure everything is good on the inside too. This engine did have cracked manifolds but no cracks on the outside of the block. Sometimes I'm lucky, sometimes not.
Переглядів: 85 098
Відео
Volvo Penta AQ131A Red Cover Marine Engine
Переглядів 8 тис.5 років тому
Great running engine completely gone thru but NOT rebuilt....it didn't need to be as it has great compression and no upper or lower engine noise.
Volvo Penta AQ125A Red Cover Marine Engine
Переглядів 19 тис.5 років тому
Volvo 4 cylinder engine that was cleaned up and repainted. Everything has been checked and has a new impeller distributor points. Compression was around 165 psi on all.
Volvo Penta 4.3 Marine Engine AQ205A
Переглядів 10 тис.5 років тому
This is a 1990 4.3 Volvo Penta engine with the 4 barrel carb. #1 cylinder was reading about 150 psi so oil was added during testing which brought the cylinder up to 170. The rings on cylinder 1 are sticking and normal running may free this up. Over all it's a great running engine with new plugs and impeller and no lower end motor noise.
Volvo Penta AQ230B Red Cover Engine
Переглядів 4,2 тис.6 років тому
Good running marine engine with all cylinders at 170. Will replace all VP 4 cylinder engines pre SX.
Volvo Penta AQ125A Engine
Переглядів 13 тис.6 років тому
Compression is 175 on all 4 cylinders.....has new points, spark plugs, and impeller. The oil was also changed.
Running 2000 Honda Civic with front end damage
Переглядів 1596 років тому
2000 Honda Civic that also runs and drives, has 158702 miles. Was in an accident where the front bumper went under a truck bumper which took out the front core support with radiator and condenser, the hood and head lights. And each front fender has the corners bent. Great working automatic transmission and good running engine. Text or call with parts you want. 414-852-567three
Volvo Penta AQ120B Red Cover Marine Engine
Переглядів 1,7 тис.6 років тому
Great running and looks almost brand new. New plugs, impeller and copper cooling tube seals.
Pomeranian Chihuahua mix VS tiger striped cat
Переглядів 5218 років тому
Mynx the cat out weighs Sky the Pomeranian Chihuahua by about 4 pounds and it's always a good battle when they play fight. Sky is now 1 and a half years old and Mynx is about 6 months.
Pomeranian Chihuahua mix with German Shepherd puppy
Переглядів 2,4 тис.9 років тому
This is Sky, my Pomeranian Chihuahua mix. The another puppy is Max, an 8 week old german shepherd.
Pomeranian Chihuahua mix 8 weeks old
Переглядів 6 тис.9 років тому
This is Sky, a Pomeranian Chihuahua mix. When I first got him his eyes were not perfectly straight, but as he got older there now fine.
would a 230 motor fit in a boat that has a 120 volvo penta thanks Rob
How did you make that ignition! Im trying to get one of the engines started without using the boats ignition
I’m having issues with mine. Wish I could get in touch with you for advice
That sounds amazing. What do you gap your plugs out and what’s your firing order? Mine seems to be missing.
Dang that started right up lol
I know the major cause of cracked blocks is abuse and neglect by the owners , but I can't help but wonder . Do you see more Mercruisers with cracked blocks or Volvo Pentas with cracked blocks ?
How du you winterice that?
Ive seen guy cut v channels then JB weld them and have good results.
Working on one for a customer and his was cracked in the valley same as this one. Found a new block and got it all rebuilt. Fixing to put it in the boat after i get everything assembled
Can anybody tell me why my relleller smokes like black and white smoke thanks
Thats sad. I rebuild my 6.2 and I know how much work is in such an engine. Greetings from germany
That's some pretty bad lighting dude lol
Is it for sale
Just like the Ford 351 Clevelands, cracking in the valley due to freezing.
Can’t see what you’re looking at. Poorly shot video. Out of focus, shaky, no lighting. Shame as explanation quite good.
You swell all of your parts yet?
How much u selling this engine
Here in Northern Europe block cracks are a way of life through freezing , running on raw water. GM, wether MC or Volvo , V6 or V8 they take no prisoners and often don't show until hot. Many a 'new owner' have found that to their cost.
Nice tutorial man , where I can find parts for this motor ?, thanks.
Seal it and run it
Can you tell me the order of the cables to the distributor helmet?
1,6,5,4,3,2
Wanna sell it.
I also took it out today for the second time and I can't get it to go full throttle. Could the spark plugs make it do that?
I have the same problem with mine
I just put some New NGK Spark plugs into my Volvo Penta Aq125A 110 Engine and I was told to Gap them at 40. Would you be able to confirm if that's even Right!? I seen on Google 2.5-2.8 so I'm not sure anymore. What are your spark plugs gapped at
He's so cute! I just picked up my pomchi yesterday, you might want to tape up his ears so they'll stand up. He's adorable though
Were can I find a simple wiring diagram to test start and run like this?
Is this engine sold
Hi guy, i have a 4.3 L mercuiser engine too, but I dont what is the past number of elbow and menifold, would you let me know . Much appreciated.
Hey I'm looking for a block of this size and this model withc is a1997 any Idea we're can I get a used one my badge is not to open for a new one if you know about bone or someone has one please get with me for all thank you
How do you change the power steering belt?
odds are there is a crack in the bottom of the intake too where the coolant flows below the carb, usually don't have one without the other
Which heat exchanger is that? Considering upgrading my own 120B H/E as it's the original smaller one.
I have the b230 engine volvo penta in my glastron, i have antifreeze coming out of my exhaust hole on the back does this mean my heat exchange is bad?
do you still have any 4cly engine ? i have a blown volvo engine in my 1995 campion explorer 188
I would have thought this motor to be a roller motor was surprised to see it as a flat lifter
Beautiful looking engine!! Wish mine was this clean! Sounds great too.
Is this for sale 🤔
What do u call the slightly domed cap on the left side of the engine that is above the copper pipe? I need one
A cap . I don't know either .
camera is shacking more then motor itself
😁😁😁😁😁😁😁
Is this for sale?
Omg i love your doggie,were can i get one ,love his white paws...my sister doggie just past away
Can you take a picture of the wiring harness. Connections to coil distributor resistor starter and alternator please. Znebel@hotmail.com
need at least a light
Please tell me where can i buy parts to fix up mine????
That's beautiful.... sounds great
I just built a new 4.3 L MerCruiser what oil should I use since it’s brand new
You built an engine but you don’t know what kind of oil it requires. Somehow I don’t think it’s going to matter much.
Pozdrav Zamolio bi te da mi se javis na moj email. Hvala puno. antekolenda@hotmail.com
Wow, in focus once, terrible video.
Hi Gina.Can you please contact me on my email please. I need timing belt for my engine.I need to re build my aq125A .Email is antekolenda@hotmail.com Thank you.
Hi Gina. Can you please discribe conection to macine on stand please. Ignision coil and starter. Please thank you.