Відео

thanks! I don't have that info in my notes exactly..but had to 2-step the lowers if I recall they were marred up in bad shape from car washes. A wool pad to cut, and I like a yellow Rupes foam pad to finish with a polish like Sonax Perfect Finish, or Rehab by P&S, or the Gold Standard polish from DIY Detail are my top 3. Rehab #1 for me I think currently.

Thanks for the info ! Sonax perfect finish is definitely one of my favorite finishing polishes with a yellow or white rupes foam pads !

not sure..Looks like revision was feb 2024, id have to go back and check when I purchase it but im leaning towards mine being V2.

welcome!!

thanks and Yay!!

agree!

Ill buy Beads when I empty my Wet Coat gallon...

thanks for watching!

Correct. But haven't seen this vehicle for a few months and wanted to see how it was resisting clogging. And told customer I would boost it to get some added protection here thru harsh winter months.

I agree. However, i do like me some Adams Slick & Slide(same as OG drying aid), which has no real longevity. Or C6 Mist, which doesn't really do much and doesn't stack. 😊

​@waxmanvids5015 Good point. 👍

thanks

thanks Kay!

not sure!

www.carsupplieswarehouse.com/products/autofiber-flat-out-microfiber-wash-pad?_pos=1&_sid=54a81e37b&_ss=r

thanks for watching! The drying towel is the Twisted Loop from Armour Detail Supply.

Hey Garrett I will say I give you credit for jumping right into the deep end with a formidable Coating! :) You ll be ok just keep your work area small and level it (buff) in 15-30 seconds max. Let me know how it goes!

@ sounds good thanks!

@ very welcome

@@waxmanvids5015 also I have messed around with 3Ds basic ceramics after doing headlight restorations just so kinda deal the headlight and that one is super easy to work with so we’ll see how this goes!

what's your fave? Mine is currently really prob diy details v2... but love the Hero name and easy to teach my customers...

@ ahhh man, my all time fav is Feynlab v3 and runner up is Ethos. I’m so biased with Hero, but man, Ethos cleaning power is tremendous. DIY is great, but cleaning power is not as great as I thought it was. But it cleans wash media very well. Feynlab. Ethos. And tbh, Detail Co Nemesis is legit. Don’t try Gyeon Eco wash, very weak and leaves my sponge dirty 😭😭😭 oh and Absolute is ehhhhh. Those are the two I don’t recommend.

@ gotcha I didn't like Absolute really too much at all.

thanks!

Fiirst I remove and wring out wash media..then dump bucket out into front grass! ;) No harmful ingredients...

@@waxmanvids5015 If you can re-use the solution, would you? By changing to multiple to mf towels, only dipping clean towels back into solution, the solution is clean & re-use on next washing?

@ I know that technique you are talking about, but I don't prefer it myself...too many towels and added wet laundry to the bag.. especially this time of year I don't do enough vehicles to make it worth it...

yeah, I think I'm going to make a UA-cam video on my little Worx Hydroshot power sprayer for my customers that do not have a garage water supply. They can just pull water from a 5 gallon bucket filled with warm water....

thanks KCK!

great product

Dark Fury does work and is very dilutable & cost less!

hi Owen, thank you and thank you for watching! The bucket I got from harbor freight with one of their high-quality lids. And the dolly it attaches to I think I bought at Walmart for around 15 bucks.. I will post the link below for the gloves 100% Waterproof Gloves for Men... www.amazon.com/dp/B0B73YVJ1H?ref=ppx_pop_mob_ap_share

thanks Mike!

Good to know. I did find quicker wipe off worked much better. Weird how the pillars were, but maybe need to work even quicker on those. They claim "its the everything" Coating.

@ it’s almost like they’re more porous and they need a wet application and they flash quick. I had to pay special attention to some gloss black 2025 Tundra fender trim even with Hyperclean Uno, the one year which is also a sweating type coating.

good idea!

Omgosh wow. Thank you. I think they went to aggressive of a formula on this Stout...

@ I yelled at my screen when I saw you do the entire hood haha

@@jbalinski hahahaha love it!

Depending on the tree, Sap can be a real bitch to remove. That is why it's great to have a good layer of wax, sealant or Coating to keep contaminants from sticking so much too. Thanks for watching!

thanks! Not sure if Ill keep using it. The fact that I can't apply new coating to reactivate and fix a high spot is frustrating but at least it seems like it's a very durable product..

Try a little 2000 or 3000 grit wetsanding..than yes cut with a wool pad. On a rotary it's amazing but do only in short time intervals and don't let the paint get too hot.

you can try...they're so cheap I just order extra and pitch em. I tried spraying solvent thru one to save it and it still clogged badly. Lmk how it goes!

hmmmm In my test it is holding up very well still against Mohs Evo by Gyeon after 10 months in...Im really now sure about the DIY Coatings personally, but I do like their other products alot.

prob not..but maybe in the future

absolutely agree

gotcha I didn't see the Pro version..but at least I think the hose might be the same and hopefully it holds up over time. Fingers crossed like it alot so far.

It’s the same hose the pro version just had the fittings you can replace easily if the hose tears in the field. Considered field serviceable!

@robpeluso2852 gotcha!

I haven't heard that myself...

yep used it again it wipes off incredibly well with rinseless wash too!

@waxmanvids5015 I'll definitely be trying it when it warms up. Other than GSP. Have any other favorites? I also like Phoenix EOD polishes.

I agree I did a piano black pillar with a 50-50 euro fiber pad and had to follow with a foam yellow rupes..

yes ..never heard from customer of any issue after. You used Pro Quartz from ADS?

i'm not sure if the connection looks the same I would imagine so I'm not familiar with that unit

100% Waterproof Gloves for Men... www.amazon.com/dp/B0B73YVJ1H?ref=ppx_pop_mob_ap_share

Thank you!!!

You bet

yeah, the one that I sprayed in the demo is my wheel/tire specific unit and I have that hose probably about a foot shorter than the stock one… But my second one for the vehicle body is normal length.

Cutting the ends off first was my first thought then you did it 😅

yep definitely extra time to "play in the garage" this time of year...detailing requests have slowed down dramatically. Plus I still like to tinker with ideas outside of my full time job in the evenings after work...

oo nice lmk how it goes. I was able to shorten this hose but wasnt easy..

I just ordered the Flexzilla hose that looks like it's going to be so much better!!!

@waxmanvids5015 Heck yeah. I'd love to see your video on that too.

gotcha I would definitely use it if I had a wash bucket for the wheels and tires but I think I will just rinse them off after each use between wheels with the pressure washer ...thank you for watching!