Відео

I have one and love it. I have a bad back and need good lumbar support. This chair is perfect on my back. Had it for over a year with no problems. 2 things I would change though: recline further back for napping would be nice. And a one touch full recline and return to upright would be great instead of having to hold the button the whole time. Other than that I love mine. Thanks for the video.

I went with the Quadratec QRC Winch bumper on my Mojave. Bolted right up. I had to trim the skid plate slightly but that was gravy. Diode Dynamics fog lights will work with your bumper.

Thanks for the Video, May i know the Wheel Size & Offset?

Thanks a lot....I have the same symptoms on my 2013 jk....I will change the cranck sensor and hopefully it works....I been dealing with this problem for a long time and also the dealership has not been able to fixed it but they sure charge for their time waisted.

thank you. Now I am being one. I was on the fence.

Can you turn down the brightness on it? Since it won’t go off at night it would be Uber annoying if it had full brightness

Did your jeep smelled like gasoline too when having the issues?

Got one of these free of Facebook marketplace because the "electronic part doesn't work" and sure enough, the power brick had become loose and slid away, disconnecting the power cord. after securely connecting, everything work fine. Thanks for sharing your experiences and fix!

Was ur car jolting? I think this might be my problem as well I took may car to the dealer because my tire pressure light flashes and my car drives like it has a lose of power and I thought it might be my shark plugs becuase I bought my car used from someone however the sensors are brand new no check engine light and now my car keeps shutting off randomly if I’m dealing or driving slow. It never happens when I’m driving over 15 miles. 🥲

So when you started pressing your pedal to accelerate, it would bog down a little and then pick back up? That’s what mine does, but not always, which is confusing.

Wow no check engine light ima try that with mine I just thought I have a ticker it might be that too lol

Well kind sir, 3 years later I watched your short video and indeed it made my day. My '13 Town & Country has a new genuine Mopar CPS and it hasn't run this well in 18 months. Dealer couldn't figure it out - similar story to many commenters here. Many thanks for leveraging what you learned by showing us all what it takes.

can i get a android tablet and make the same thing?

Another jeep saved! Thank you bro it worked for me 🙏

Thanks for the video. Framed up two of these for my home renovation. Nice to see what it looks like all setup. Can't wait to get it all setup!

i wish you would show the issue ACTIVE before fixing it instead of just telling us "ok buy this ok fixed"

Can you provide a link for this please

You can use the DV8 Adapter brackets

I miss diagnosed a vw jetta and I changed the crank sensor and it gained more power too. From my experience i always thought the crank sensor ether works or doesn't now i became a believer. And it still doesn't make sense.

Random question. But are you able to have this also control apps I.e Spotify ? Ideally I’d love a solution for my cameras and music all in one.

Thanks for the review - just ordered!

What running boards are you using and are you happy with them? I’m thinking of going with the AMP Power XL

My wife’s 2013 isn’t doing that but it suddenly loses power steering and the gas pedal doesn’t work at all. You have to pullover and turn the jeep off and back on and it’s fine. You think changing the CPS will fix it? Or am I having a different issue? I’ve looked all over and have seen others with the same issue but no apparent fix.

Great video, bud! A couple of things: 1.) That hood looks amazing! 2.) Is that a bit of a valve cover gasket issue down there or is it early and my eyes are playing tricks on me? Anyway, thanks for posting!

Ok, I got this display and I'm trying to figure out if I could even use the flush mount. Are there any studs behind the the mount there, The display is super thick, I migh have to screw the Vesa Mount to the wall and call it good enough. Any pictures with the display removed would be great.

My Jeep started stalling when putting it in reverse after start up. The second start always took care of it. It happened the other day after driving a bit and going into reverse. I had to rev the rpms to keep it from stalling. It seemed to work it out and now good. Did you experience this?

Hoping this is my issue. Going to pop one in later today. Put the new one in and no immediate changes yet. Its slightly better but the issue is still there. Im hoping i just need to give it time. Ill see how it drives home from work tonight.

Honestly this your video is one of the few that really got me impressed since I have been watching videos on UA-cam and I really give it to you for doing a wonderful job.I have a Samsung range and I don't know why when I try to put on the extreme left valve the flame just flares up,so can this be caused by a defective knob or the only thing that the knobs does is just to put on and off the flame.I am thinking maybe it is the vale that is defective or the tube which I am trying to change after I must have crossed all the t's and dotted the i's.I am not really sure,so I will really appreciate getting your own opinion about this since you have done something related about this before.I can't expressway enough how much I like this RangeSafe knobs,asides the fact that it ensures safety,it also beautifies the stove,but one thing that I am not getting clearly is that there is a sticker at the back of the knob that makes it stick to the front panel of the stove,so if something has to be done on the stove that requires the knobs to be taken off how then will the knobs be removed considering the fact that the original knobs that comes with the range can be removed and replaced as the situation demands.I have ordered the deluxe model of the RangeSafe knobs,I can't afford not to have them.Thanks,looking forward to hearing from you hopeful that you can help.

Where did you buy the table that is between the chairs?

I had one of them go on my 2015 Rubicon on same engine. Scan tool told me which one to change. My symptom was traction lock light would come on over 75Mph, which would lock up rear brakes which Jeep simply overpowered. I had to turn off traction control from switch and when I stopped, smelled the bakes burning. It would also throw the check engine light. Once crankshaft sensor replaced.. all fixed. Occasionally I got EVAP check engine light on also, that has gone away also since changing this crank shaft sensor so maybe it was all related and threw codes being on same BUS network.

What winch bracket did you use Model # and brand ? DK

Software is stable as ever I see lol. Do I need a Connect to view cameras or can I mount an iPad to do the same thing?

These are nice,what is the brand name and where did you get them from.

Thanks for the information because my wife's jk is doing the same thing, on my way to O'Reilly now. Thank you

Thank you

Why get a mojave and chop it up? Makes no sense but okay!! Let me guess replace the shocks next??

Thanks for making this. Going to change mine today.

I'm try it. Because I'm thinking fuel pump engine but jeep cranks right up. Just when I'm driving 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

Have you noticed if theres any camera lag? I'd like to use this with the G4 Doorbell Pro, and need something to display pretty much in real time.

Absolutely crazy!! My girlfriends 2014 rubicon has been doing this, just going down the road and it suddenly loses power like it's starving for fuel then dies. Wait a few minutes and it starts right up like nothing happened and maybe 2-3 month later it happens again, no codes or any real sign of a problem. Very intermittent, definitely worth throw a cheap part at it and see if that will resolve the issues. Thank you for posting

Thanks for the video I just ordered it

I Have the exact same issue but its really bad on the highway. I can apply gas and it'll just hit miss hit miss hit miss hesitate, etc until it down shifts, then it still acts up some. Pisses me off cause It just started after warranty expired and the JK only has 24k miles. Love the Jeep but hate the MOPAR BS. I changed my Crans position sensor and it did nothing. SO PISSED.

Thank you for the video!!! My 2015 Jeep Wrangler unlimited at highway speeds lost power and had the RPMs go to 0 for a split second and would regain power and be fine for several days before doing it again. This happened four times to me. I was telling my dad about it at Christmas yesterday, he said, “it might be your crank sensor”. Well, thanks to my phone listening in on our conversation that night, I was scrolling down my UA-cam feed and found your video, 3rd video down. And thought what the hell, I’ll try it for $20. Today the jeep ran great, I picked up the sensor at O’Reilly’s, went to the gym. When I was leaving the gym, for the first time the Jeep starting running like shit and had no power. Misfiring and finally threw a code and what do you know it was the crank position sensor. I changed the sensor and cleared the code in the McDonald’s parking lot and the Jeep ran like new on the way home. Thank you again for taking the time to make the video!

unifi tv app = free

Can you talk to people and get notifications from the doorbell?

Love the steps. Where did you get them?

I did the side tables bought these today, if anybody knows where to find these side table let me know

Did it hesitate starting when it set over night cold mine does that then it’s fine , only when I start it turns over little longer when starting it power seems ok . Just when I start it .

Is it the same for a 3.6 with a manual transmission?

Hi there, I'm 6 ft tall. Will these fit me head to toe?