Відео

Speedsportz Racing Park in New Caney, TX

@ very nice I’m trying to find a track suitable for my Ducati hyperstrada 939 is there a certain criteria only that’s allowed for bikes ?

@@TwistedRidess any car track near you will be fine. That bike is too big for kart tracks like this one

@ gotcha thank you boss 🤙🏼

Frame is an AxisFlying Manta 6

I put about 30-35 hours on the motor over the 2024 season, still running great. Athena high compression top end with leaded race gas and a Smart carb makes a big difference in power and keeping the motor running right.

Only when I heard the caliper scraping against the rim. I thought it was my chain or something at first which is why I was looking around in the video. I have a new fork tube coming and brake parts, will definitely safety wire everything before next season

@@alexchulzhanov looking at the failed aluminum om the fork top mount point,it looks like the lower bolt cam loose and the undpper bolt asomhad lossened but not fully come out. The bolt shank then smashed throughthe auminum. Was that what you had left, just the top bolt in the caliper bracket? Not sure if you just stuck the bolt back in for the static photo you are using for the video thumbnail or not… in either case condolences on the failure.

Appreciate it man! We gotta get another day in sometime soon!

Never mind 3rd might be a lot but I’d say on the straights maybe🤣

Dry weight is 660g with the 8" pitch props and spinners. AUW is just the additional weight of the battery, I think the Tattu R-Line 1800mAh weighs around 290g so 950g total. It's on the heavier side with all the printed aero parts.

@ wow that’s so heavy How fast did you end up clocking it at?

No, files ain’t public

3 screws each, M3x12. I just had two in there temporarily to hold the motors in place while I cut and soldered the motor wires.

@ ahh ok Nice build tho

I ordered a complete set of prints but asked Brain3D to print them in ABS/ASA. The lower shell/battery bay is an overly tight fit so I need to make the clips a little looser but already the quad feels much more durable. I’ll make an update video eventually. 3D scanning in my opinion won’t really give good results because Brain3D also prints with very thick layer lines and sparse on the support material so the prints aren’t the best quality they can be. I sent an email to Chris with some of my feedback so hopefully he sees it and hears the concerns. I mentioned that this quad will get expensive very quickly having to buy reprints all the time, especially with brittle PETG.

@ completely agree. It’s too easy to break it, even when not even in flight.

rightttt

Mhm

Yeah, these are doesn't make sense, planes are way better for this :) Nevertheless, great review

Hello my friend from the past.

I have some bad news for you in about 5 years

Hello Marty McFly😂😂

@@Stevegoguen I thought about going with 8S, but all of my chargers and such only work with 6S, same with the Blitz F7 stack. Wasn’t too interested in the investment needed with 8S. My recommendation would be to use the (relatively) shallower pitch props (6 inch instead of 8 inch) so it puts less constant load on the motors. The 8 inch pitch props I used definitely give it that extra top speed but even cruising around it draws a lot of current from the battery.

Dron for one fly? 2 failure's...but is fast.... 💪

Do you think bardwell really “crashed” and “destroyed” it on his first flight… someone with soooooo much betaflight experience hmmmmm… plausible deniability maybe??? LoL

Just saying buying a second shell for $60 and smashing it wouldn’t sound crazy right

@@HOSS3822 maybe some line of sight flights to get betaflight settings all set and then install new shell 😁🤯😉 nothing crazy about it. All a learning experience 😁

@@SoThrowedd first Sunday of each month is moto only day. $75 to ride from noon to close, bring your own gear (full leather suit, usual track stuff). I am a member so I’m out there pretty often. Every other day the track time is split between karts and bikes unless there is an event on the calendar. Come out and join us!