Відео

this was really helpful, thank you!

I put grommets in all my paper Halloween and Christmas decorations so they won’t tear.

Are crimping tools same for end connectors and butt connectors used for splice

mine still slips regardless of how tight that adjuster is

" how to crimp without a crimping tool " Strips it off with a tool nobody has😂

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Thank you so much. Mine came with no instructions

mine still slips

We bought the exact same kit and it did not come with instructions. We were completely lost until we found your video and it explained everything perfectly. Thank you!

Nice video. What's use of romex cables?

This is a really good video. Thanks for taking the time to make this.

Thanks for the video however you leave out stuff like how hard it is to actually use this standing up with material that's gotta go much deeper for the button to get to while not often on a table it's very difficult to get these square enough to where when you press them that they don't get crooked and pop off on the 1st snap so there's some getting used to it for sure I'm using it to try to put some snaps on my Bimini on my boat without taking the Bimini off its frame is very difficult standing up in the air outside definitely not the same as doing it for practice on a box....

But you only put one piece in there what do I do with the second piece?!?!?! They both had the big whole thing but where did you put the big hole things!!?? This is useless

This is awesome! Thanks.

Lol thanks for nothing! Lol

what u skipped?

You can do that with regular needle nose pliers, some of these hoses are fused together with the inlets

This video is much easier than the instructions that came with my pliers

They're not heavy enough to pound nails very well, but in a pinch...

What tools did you use for soldering?

This is the most underrated video on crimping butt connectors. It's on point and has multiple video examples of the crimping process. Thanks.

Nice video.... but please lose the gloves. Thank you.

Just what I was looking for

Is each plier for only a certain size of grommet?

If u use 23 AWG like utp how to adjust bite force it is clock wise or counter clockwise?

Bro that's a generous helping of solder. I'd call it a day once the strand is properly covered.

Helpful

Very good video

Pliers...umm NO!! The correct description is Dykes Side Wire Cutter..the term Dykes came from linemen who shortened the description of the tool into a jargon of sort (D)iagonal (C)utter(S).. and No.. Not Plier cutter.. Diagonal Pliers.Yes, that's acceptable..why are they angled.. it's for small tight areas and angled incase your cut needs to be straight and fingers need the best grip possible.. honestly.. this girl gets half the proper description incorrect.. she's a real Helen Keller this girl 😂😂😂😂😂😂😂😂

Hiw to buy this tool?

What rating would you give to the Kaiweets vs Klein 11061 bro?

Mua. Cái này ở đâu a

A Friggin' Music Video? How about doing An Instructional Video with DIALOG?

A Music Video? I wanted an Instructional Video...:(

Can you use any size snap with this tool?

So after you crimp the wire then what application is it used for other than sticking in a receiver to dog down.

ஹாய் ஹவ் ஆர் யூ? தமிழ்நாடு ப்ளீஸ் கால் மீ பிங்க் ப்ளேயர் ஒன்

Hi

Didn't you mean to label the VCELINK as flush cutters instead of side cutters? (ua-cam.com/video/YKu9RW3hjZA/v-deo.htmlsi=5h6KDOZp8fTVEXyz&t=20)

Helped me and I saved $50 on the specific tool. you can do this job with a $10 crimping and stripping tool...

You stripped the outer and the inner insulation together on the 2 x18awg Romex cable. I want to strip off just the outer, and keep the inter two insulated, up to 10mm in length.

I carry a small selection of wires with crimps either end - 1 with male crimps 1 with female crimps 1 with male and female crimps. This allows me to bypass switches when I’m fault finding. DISCLAIMER I never, never leave them in place. Switches are there for a reason, namely safety. This is purely part of a process of elimination to find a problem.

How to order?

Thank you, that was a very clear and instructional video.

Thanks for the demo of both tools. This was very helpful.

I guess you cut the straggler strand off?

প্রাইস?

Tool name sir??

I'll stick to Klein. China already gets most of my money.

I've been using Knife Pivot Lube for my linesman pliers. I use the ultra light. Nice to have the precise tip to place the oil. Not inexpensive.