- 313
- 792 656
The Universal Grip Company
United States
Приєднався 5 чер 2015
www.universalgripco.com
The Universal Grip Company is the leading distributor of grips and fixtures for universal testing machines in the USA. UGC is also the official distributor of Galdabini's line of electro-mechanical Quasar Universal Testing Machines and Impact Testers. This equipment is used to perform ASTM and ISO standardized mechanical testing on a large variety of materials including plastics and metals.
The Universal Grip Company is the leading distributor of grips and fixtures for universal testing machines in the USA. UGC is also the official distributor of Galdabini's line of electro-mechanical Quasar Universal Testing Machines and Impact Testers. This equipment is used to perform ASTM and ISO standardized mechanical testing on a large variety of materials including plastics and metals.
How to Setup Adapters on the Mark 10 Machine
Quick video on the initial setup of the Mark-10 machine to use with Universal Grip Fixtures.
The adapters use a 5/16"-18 threaded connection which terminated in a male clevis stud 5/8" OD with a 5/16" locking pin. These adapters will unlock our full line of grips and fixtures to use with the Mark-10 tensile tester.
For more information on our tensile testers, please visit:
www.universalgripco.com/tensile-testers
The adapters use a 5/16"-18 threaded connection which terminated in a male clevis stud 5/8" OD with a 5/16" locking pin. These adapters will unlock our full line of grips and fixtures to use with the Mark-10 tensile tester.
For more information on our tensile testers, please visit:
www.universalgripco.com/tensile-testers
Переглядів: 22
Відео
100kN Capstan Grips Tensile Testing Carbon Fiber Strapping
Переглядів 2221 день тому
The 100kN Wrap Grips are perfect for testing any type of strapping or webbing material. These grips can attach onto any universal testing machine. For more information on our grips and fixtures. please visit us at www.universalgripco.com
10kN Wrap Grips Tensile Testing Strips of Carbon Fiber
Переглядів 3421 день тому
The 10kN Wrap Grips are a great option for testing cords, ropes and straps. The grips are open on one side which allows for easier sample loading. These fixtures can attach onto any Universal Testing Machine with adapters. If you have questions on these tensile testing grips or any others, please visit us at: www.universalgripco.com
How to Sharpen ASTM & ISO Cutting Dies with the Die Sharpener
Переглядів 10028 днів тому
The Die Sharpening Tool from Universal Grip is the ideal solution for sharpening ASTM & ISO cutting dies. First, disassemble the die, and then simply run the tool over the cutting edge of the die to hone it and create a razor sharp edge. If you have any questions about our cutting dies or presses for cutting ASTM & ISO samples, please visit our page here: www.universalgripco.com/astm-cutting-dies
Fastener Pull-Out Strength Fixture for Testing the Tensile Strength of Fasteners & Screws
Переглядів 42Місяць тому
This Pull-Out Fixture for testing fasteners is capable of testing the sample in two direction. The fixture can be adjusted 90 degrees to test in either the vertical or horizontal direction. The sample is mounted underneath the restraining plate and screwed down with the 4 speed screws. There is a pin and locking mechanism underneath to adjust and slide the fixture from 0 to 90 degrees. The fixt...
ASTM D412 Tensile Test on High Elongation Samples
Переглядів 632 місяці тому
🌟 We're thrilled to showcase the Galdabini Universal Testing Machine performing the ASTM D412 test on a rubber sample! 🌟 What is ASTM D412? This essential test method evaluates the tensile properties of vulcanized rubber and thermoplastic elastomers. It measures critical factors like: - Tensile strength - Elongation at break - Modulus of elasticity Rubber and elastomer products are designed to ...
How to Use an Arbor Press for ASTM & ISO Sample Cutting - Tensile Testing
Переглядів 1123 місяці тому
This video shows how to properly set up the Press & Die combo from Universal Grip. This setup is used to perfectly cut ASTM and ISO style tensile testing samples. Get repeatable results with consistent cuts each time. For more information about our Dies & Presses, please visit us at: www.universalgripco.com/astm-cutting-dies
How to Replace Jaw Inserts of Wedge Grips for Tensile Testing
Переглядів 1963 місяці тому
This video shows how to replace the jaws on our 20kN and 50kN Wedge Grips used for tensile testing. The Jaws interact with the sample and will wear down over time. The spline gear inside the grip is also a wear part. This walkthrough shows how to repair and replace all of the wear parts and also which type of grease to use for proper lubrication of the tensile grips. For questions or production...
Hydraulic Grips with Adjustable Jaws
Переглядів 1475 місяців тому
Introducing Our Advanced Hydraulic Grips with Adjustable Jaws for Precise Tensile Testing Our state-of-the-art hydraulic grips are designed to deliver unmatched precision and reliability in tensile testing applications. Featuring adjustable jaws, these grips allow for left and right adjustments to accommodate offsets in the sample, making them an ideal choice for lap-shear testing and other com...
ASTM C393 Bend Fixture - Full Hardware Guide
Переглядів 2456 місяців тому
Complete equipment setup to run the ASTM C393 Flexure Test using a Universal Testing Machine & 4 point Bend Fixture. The rubber pads, available in either 25mm or 30mm wide by 100mm long are shown on the supports. The supports are able to articulate and adjust in both directions. Customizations to this fixture are available, for instance, this fixture is 700mm long on the base and 400mm long on ...
5kN Symmetrical Dual Roller Grip for Tensile Testing Plastics, Rubber, and Wires
Переглядів 1506 місяців тому
The 5kN Symmetrical Dual Roller Grip is a type of self-tightening grip. Its a perfect choice for samples that tend to thin out during the test. The opening is extra wide and can take samples 0-15mm. The symmetrical nature of the design also allows for equal loading on both sides. This is a solid grip choice for tricky and tough to hold samples. Attaches to any Universal Testing Machine. For mor...
Video Extensometer Unboxing !!
Переглядів 846 місяців тому
Unboxing video for Universal Grip's Video Extensometer System. This all-in-one system can be used as a standalone device or integrated with any Universal Testing Machine. Measure strain rate in real time and record it directly to a PC. Fully integrate the system with the tensile tester and use the data to feed back to the machine for complete closed-loop control. Works with most major brands of...
Small Pneumatic Grips for Tensile Testing
Переглядів 1236 місяців тому
Small Pneumatic Grips for Tensile Testing
Full Overview - Grips & Fixtures for Universal Testing Machines & Tensile Testers
Переглядів 1506 місяців тому
Full Overview - Grips & Fixtures for Universal Testing Machines & Tensile Testers
Universal Testing Machine for Steel Tensile Testing
Переглядів 1187 місяців тому
Universal Testing Machine for Steel Tensile Testing
Video Extensometers for Universal Testing Machines - Full Hardware Overview
Переглядів 3,3 тис.11 місяців тому
Video Extensometers for Universal Testing Machines - Full Hardware Overview
Accessories for Universal Testing Machines (I/O, Extensometers, Grips, and Load Cells)
Переглядів 14211 місяців тому
Accessories for Universal Testing Machines (I/O, Extensometers, Grips, and Load Cells)
Lipstick Shear Force Testing Fixture - Cantilever Method
Переглядів 373Рік тому
Lipstick Shear Force Testing Fixture - Cantilever Method
Quick Change Die Tool for Cutting Metal ASTM & ISO dogbone Tensile Specimens
Переглядів 73Рік тому
Quick Change Die Tool for Cutting Metal ASTM & ISO dogbone Tensile Specimens
300kN Press & Die for Cutting 0 5mm Steel Sheet & Aluminum ASTM Samples
Переглядів 204Рік тому
300kN Press & Die for Cutting 0 5mm Steel Sheet & Aluminum ASTM Samples
ASTM D395 Method C Fixture for Compression Set Testing
Переглядів 4,6 тис.Рік тому
ASTM D395 Method C Fixture for Compression Set Testing
How to Install the Tape Holder Reel onto the Marking Tool for Reflective Tape
Переглядів 181Рік тому
How to Install the Tape Holder Reel onto the Marking Tool for Reflective Tape
Marking Tool Troubleshooting Tips and Setup Guide
Переглядів 139Рік тому
Marking Tool Troubleshooting Tips and Setup Guide
Marking Tool for Depositing Retro-reflective Tape onto Tensile Testing Samples
Переглядів 181Рік тому
Marking Tool for Depositing Retro-reflective Tape onto Tensile Testing Samples
ASTM C393 Bend Fixture for Testing Sandwich Constructions
Переглядів 444Рік тому
ASTM C393 Bend Fixture for Testing Sandwich Constructions
ASTM D7137 Compression After Impact Testing Fixture
Переглядів 594Рік тому
ASTM D7137 Compression After Impact Testing Fixture
100kN Air Hydraulic Press (10 Ton Press for Die Cutting)
Переглядів 1,2 тис.Рік тому
100kN Air Hydraulic Press (10 Ton Press for Die Cutting)
ASTM D1388 Fabric Stiffness Bending Fixture
Переглядів 2,5 тис.Рік тому
ASTM D1388 Fabric Stiffness Bending Fixture
ASTM D4964 - Grips for Tension and Elongation of Elastic Fabrics
Переглядів 1,9 тис.2 роки тому
ASTM D4964 - Grips for Tension and Elongation of Elastic Fabrics
Please sample size add
Cable diameter I need to understand if I can design a Nitinol spring. Why post without testing details?
The most popular cable diameters are 0.2, 0.5 and 2.5mm. The purpose of this video is to show which grips are correct to use for tensile testing.
Could you please let me know the devices speed? Is it 300 ± 10 mm/min. or 305 ± 13mm/min or ? Thank you.
I would just set to 300mm/min
🤩🤩🤩🤩
@cipetpolymertech Tensile, flexural, izod impact,MFI,Ash content, moisture content,HDT,VSP...etc Plastic testing Sikh ne ke liye es channel..subscribe kare...🙏 @cipetpolymertech
What is weight You have put on machine?
It's up to you but usually 50 to 100 lbs. Is good. You use the machine to set the exact force and then the springs hold that same force over time.
LONDON BRIDGE IS FALLING DOWN, FALLING DOWN, LONDON BRIDGE IS FALLING DOWN, MY DEAR LADY
ua-cam.com/video/XScM5myrNHc/v-deo.htmlsi=roKyzQmn4zNgdM3N
Nyc
Excellent
Can I know the fiberglass tensile test standard dimensions?
Yes the strand needs to be at least 18 in. long. Diameter can be anything, according to the product. If you have more questions about this test you can send us a message through our website.
hi, excuse me, i´m working with additive manufacturing, this type of test is recommended to analysis shear?, im gonna work with ABS and PLA, thanks.
Yes ASTM D732 is the premier test for plastics shear strength. Very popular for sunglass manufacturers and companies making performance plastics. We sell alot of these fixtures for shear testing. We have in stock.
what about when unopened?
I didn't want to get soda all over our machine but we do sell baths and containers for wet testing.
How much?
@@literailly send us a msg through our website for pricing. I don't put out any public prices because they change over time (inflation).
Supper
Can be connected to pneumatic tubing to make the introduction more complete
@@李林-s2z yes we have another video “How to Install an Air Hose into Pneumatic Grips.”
How to calculate the shear strength here?
This one is pretty straight forward, you can just use the ultimate shear strength from your machine reading. And the sample is usually 1x1”. So it’s an easy calculation to get shear strength per square inch.
How much is the difference between tensile strength for specimen with holes and without holes?
Depends on the size of the hole but somewhere around 15-25% reduction in tensile strength.
@@theuniversalgripcompany Thanks for the answer
What type of material?
This one was a low-medium strength steel. For higher strength and hardened steels, we would recommend a different, more robust wedge grip.
Hello, I have a question. Do you have springs around bolts in the middle moving part ? Thx for answer.
I required this grip in India
I required this grip in India
Sir what is the sample size tear test please
Hi what is the grip gap to be set
100mm gauge length is usually appropriate but can also do 200mm
I don't think that could be thought a good test. The break occurred at the stress concentration at the lower grip - there must be a better specimen design. The plot we saw on the monitor has very little to do with the material properties - more on the behaviour of the grips as they compress the specimen.
Can u please tell me about gauge length marking
What is the procedure for explosive friction test
Hi..can you help me? My graph does not appear during test..
What is the speed of the upper head that compresses the spring?
What connection is this ?
Sure like to see a video but geeze what the hell. your music is too darn loud, ease up on the db<. no reason to be that high it is not info. To test a material and not affected by holding procedure make a much bigger piece and make a central diamenter perhaps only 1x1 vs a piece with two ends 2x2 so that the clamp or attachment does not weaken the test material
Can we add any light censor or metal censor instead of foot swich
Yes, its possible to add this on your own. The grips are normally open (there is a spring to expel out the air when there is no pressure.) You can add any type of control mechanism or sensor/switch on your own. When the grip gets the air pressure, it closes. We don't sell these but you can make it on your own, its not difficult.
Cable thickness and length?
how to do this test?
You load 1 sample into the fixture and then push down with the top of the machine. You want to rupture the sample and record the highest peak force measurement.
How much for this? Including shipping to Saudi Arabia
Please reply the grip length distance?
I believe the starting grip length distance on this test is 4 inches of distance/separation. You can refer to the ASTM method to double check.
How long supports span for d790 testing, 3.2 think, 12.7 wide, and 127 long. Thank you
Hi Rumah, yes its based on the thickness of the sample. I think these are the correct files for thickness 1mm sample. If your sample is thicker, everything else must be scaled up. Please check the ASTM document for more info. We can customize the fixture according to your specific needs.
I need this program how can I get it
You have to purchase one of the Galdabini testing machines the software program only works on these type of machines.
hello can you show me how to setup the test method
grand
Greeting Sir, I would request to please run a simualtion on Izod Impact testing in abaqus with full geometry and Steps involved.
Test PG Classic's Mopar belt PLEASE!! 🙏🙏
The fabric/tapes are slipping thru the grips. Thats exactly how you NOT make the test.
very satisfying
How much force needed to crush the 150mm can??
not good gripping.... the sample is slipping enough at the beggining of test..
The decreasing attitude on the graph at the beginning happened because of that?
what are the specifications for tensile testing of steel hollow tubes?
The material is usually tested as a bar. For type testing you can put steel mandrel in the end like a cork for a wine bottle. This makes it easier to pull. Tubes are not standard samples, only flat and round tensile bars according to the ASTM. Tubes can be different diameter and wall thickness so there is no standard tube size
Can you please make a vidon for the test
Awesome video. Thanks.
Bambpoly Green Technology looking at your equipment. Thanks.