Відео

Any idea what color the vacuum line was for the vacuum source? Black with Gray strip maybe?

What crank are you putting in the 305 block?

My man! this was very helpful, getting ready to swap mine out too! If I could make one suggestion (with a grain of salt since I haven't done this myself), at everyone's favorite cheap tool store, they have a set of plastic trim tools that could be helpful for this job. When I get ready to replace mine, I'll try them and if I remember, I'll update this comment and let you know if they worked or if I had to just use screwdrivers. Thanks for all the great SB content! It's been super helpful with my 76 crewcab!

Good video thank you

I have a 79 K5 all original with 139000 miles on the original engine. Do you have any experience with converting ac to 134a?

🇺🇸 Sounds healthy. 👍🏻

Thank You Bro. The air box can be a little overwhelming at first.

Thank you for this. Helped me out big time. Until I found out the guy before me RTVED the old one it. Was a really fun place to visit. But I got it out and used your video to install the new one.

I have a 1978 camaro with a 305. My car passes smog. If i change out the cam to get one like the one you put on will it then not pass smog? Love the sound.

𝕃𝕚𝕜𝕖𝕕 𝕟 𝕤𝕦𝕓𝕓𝕖𝕕 𝕧𝕖𝕣𝕪 𝕒𝕨𝕤𝕠𝕞𝕖 𝕟 𝕙𝕖𝕝𝕡𝕗𝕦𝕝 𝕧𝕚𝕕𝕖𝕠

That was really good I’m having the same problem I was looking for steering column to change it, thank you oh

Ive watched a dozen videos at least and youre the only one to mention this, i was so confused because when i tore my engine down it looked like it was 180 out according to the dots, you made it make sense, Thank you!

I use edlebrock gasket sealer

What hood is in that Ram Laramie?

Thabk you so much

Just bought my buddy’s 70 Camaro 350 small block 5.7L and ran into my fuel pump giving out. As I’m looking through your video I noticed there’s a bolt on the side but the negative cable that goes to the battery is connected to that bolt and is def leaking. Help? Where should I move that cable to? 😮

Great stuff!

Amigo aqui no Brasil tem um problema com os carro com modelo de suspensão desse jeito, com o tempo as juntas esférica saca fora e a roda cai , ninguém consegue resolver o problema, conseguiria da uma ideia de como resolver, grato Brasil🇧🇷

Hey can you make a video of a map of how the wires go from the distributor to the spark plugs

8 tracks keep ya on track.

I know this video is a little old now but any chance you have the part number for the idler arm? I’ve gotten 2 from different brands now and the shafts seem to be the wrong size, yours looks like what I need. Thank you!

That hat holder is cool. Is it custom or did trucks come with them originally?

Thanks for keeping it real Chad I do enjoy your videos

squarebody

I got a problem with my 78 C10 right now with the felt seals in the slider itself. The actual latch bar pieces pulled off of the glass on both sides haha. Mine has 2 latches that are like a squeeze and push

I’m grateful for your initial alignment error… the catch showed me what I needed to see. ❤

I’m grateful for your initial alignment error… the catch showed me what I needed to see. ❤

This video was not only informative, but a bit humbling. I found that hitting it with my purse was the key component to removing the bulb! Thanks Chad!

👍 Outstanding run! South Texas here. keep up the great content.

U don't put dope on the threads?

The name of your channel warranted my subscription before I watched a single video.

I just found that wire and I was thinking the prior owner snapped off the housing to a bulb etc. and was "Googling" 1985 GMC C15 ashtray bulb then your video popped up. I never knew they had that type of wiring in trucks back when I was 18. 😂

Them tailpipes lined up perfect...and she sounds good.

Bro you are good... love your style learning a lot from watching this video i just started welding bout 6 months now my goal is to be good at custom exhaust and im gettin better by the day. have done lots of repair work around hood lately people like my work and that is a plus I need Big Kats like you to show me the ropes...you got a new student here...Keep it up Bro..im all in.

Well......I took your advice...and grabbed my 7/16 and an 11mm just in case.....Crawled in there....to only discover ,that it is a 14MM Socket that you need, to remove the Fuel Pump Bolts! Grrrrrrrrrrrrrrrrrrrrrrrrrrrrr

Thanks, can u show also replacing tumbler for key

so do you drain all the old oil and just put in break in oil during the break in procedure?

Definitely the glass packs sound great 👍

I've had my 305 on the stand For over a week now and I was contemplating changing a rear main on it. After seeing this video I am going to put this on my checklist. Thank you for the video.

Good point about wanting a little more politeness.

My son has a 86 Monte SS he wants to keep stock looking, but installing a 350 4-bolt main from the 74 era. The right exhaust manifold is odd with a bolts pattern at the rear that the newer heads are not drilled a tapped for. This interferes with the dipstick tube location. If we change heads, it will be the new small valve 305cu in. I am confused after 40 years as ASE Master fixing vehicles but not the swapping world. The 305 can make outstanding power but I takes a plan and a number of parts. These are not boat anchors! Comments? Thanks.

Good vid. In my opinion, Thrush welded mufflers are very underrated.

Man that thing sounds good!

Need some suspension changes in the back it would of kept coming up in the front but the back end came up way to fast

Squeaky is putting in the work good job

Hey Squarebody Stuff,this idea worked on my 1994 Silverado,very much appreciated with this thought,thanks man.Have a safe,new week.

The tip doesn't work for me. I think it bottoms out and I don't think it goes through unless is drill it out. Motor is out of a 89 suburban from what I was told so maybe they changed it

I love watching this truck..and have learned so much from that square body stuff.

Cool video thanks man 👍🙏

What gaskets are these? Are they anything special or just over the counter gaskets?