Відео

I dunno, the swiveling might grab and twist my nails when it starts getting dull

My top bolt won't come off. the one at 6:12 time. Any recommendations on how to get it off? I haven't ordered this one yet but I tried to get it off with a drill and a Allen key I have at home.

Hey Jim, if I want more then one light wire to the switch do I need a 14/3

Almost No one talks about using these with stranded wire but they're approved for it. I've heard claims that these lever nuts are great for joining stranded to solid. I Don't agree. I'm on the Ideal bandwagon and I can say I'm not stoked. They don't hold solid or stranded wire securely. I even wrapped one with tape - hot and neutral- and the solid neutral came loose. Took forever to find it because I had changed out other receptacles on the circuit and found my tester saying "Hot/Gnd Rev" and voltage on neutral and ground! I punted and used a wire nut and pre-twisted with my linemans. "Skookum" as AvE says. I also had several times where stranded wire just wouldn't feed. It would get all frayed and became unusable. I ended up cutting and stripping until the pigtail was only maybe 2". This is only an issue bc Leviton thinks they're saving me time by pre-wiring their receptacles with 12 gauge stranded! 🤬🤬 Anyway I kinda figured out that if you keep the strands perfectly straight after stripping and you meticulously make sure every fiber gets in, you can push the wire in slowly, lever OPEN, and it usually holds. But it does NOT inspire confidence at all. Also... The Ideal "snapping into place" seems good but in a tight box they still flip back up sometimes. Honestly it's hard to beat a nicely pre-twisted group of conductors and a wire nut for security.

This was a HUGE help for me in many ways today! Thank you so much!

OK. My unit didn’t have a slit in the side to push the strap through?

Just used it on my sink cleared it up after 3 hits and works great!!!!!!

It works

Supposed to cut up to a 1/4” bolt yet nobody shows that being done. Be nice to see how large a bolt they can cut. Saw a guy using Knipex bolt cutters to cut johny bolts for mounting toilets but I have no idea which Knipex bolt cutters he was using. Those are the ones I want!

Nice detailed video. Wish they had an option to screen off the large openings in the base. I have had problems with raccoons and other critters getting in and making a mess with the grease trap tray.

so this assembly does not come WITH the machine?

Thank you for this video!! During the descaling process, water was spewing out of the K-cup side and could only get 1 or 2 cups on the carafe side. I followed your directions, and now both sides work perfectly. I appreciate you.

Can you strip braided shield wire? Will it take off the shield

Saved my bacon. Thank you!

Fantastic video. I’ve been cussing Stanley and just about to bin it. What a stupidly elaborate way to just change a blade. Thank you.

Thank you Sir! 😀

Thank you. I injected 2.5ML for colors and the cartridge took it.

My sister thank you very much Her daughter drank this product, the emergency physician needed to know what was written on the bottle She searched for half an hour and found this video and everything she needed to know about the ingredients you already mentioned. We appreciate your efforts Thx✨

I've ejected, cleaned, wiped, used a q-tip and my printer keeps saying same error message, "Remove and reinstall printer cartridge." Nothing works. I put in an old cartridge and it was recognized immediately. This is maddening.

I come back to this video every time I have to descale my keurig so I mean it when I say THANK YOU for this video 😊

Can you keep feeding it through to do long pieces? Or only the inch at the end?

Love this! Please do more Things like this..

Thank you! I come back to your video every time. Much appreciated!

What if I’m in an older building? There’s no ground wire

Thank you for this very clear guide.

You think I could get a different bolt length so that it could be comparta bile with the thicker southwest strippers? What bolt size you recon?

Bottom Of Your Glasses Are Close Up and Top is Regular Of Your Glasses.

how can it vent when you cover the hole with the sticker?

Hey Jim - You're a star !

Finally someone who mentions the reality of it getting stolen. Would parking on it really prevent getting stolen? or would someone tie up to it and pull it out.

Dude. You're not supposed to use the cocaine mirror. 😂

THANKS!! Made the job much, much easier. Hard part is contorting my body to be able to see the truck light and work on it! I was able to get the original bulb out without removing the whole assembly using some latex gloves for better grip. I used the albeit expensive Philips Ultinon bulbs because I have have had very good luck with them in the past for my Forester and Accord. THANKS!! 2025 Legacy.

My kit was supposed to come with the cable clip but didn't. Can I still install it without it? What's the purpose of that clip?

im french and manmade blocked me from their facebook page because i said there is no french on their facebook and anyway i can get 6 underwear for the price of 1 they sell. thats not how you deal with the public. je suis francophone et manmade m ont bloquer de leur page facebook parce que j ai dit qu il y a pas de francais et de toute facon je peux avoir 6 sous vetements pour le prix de un qu ils vendent. c est pas comme ca qu on traite le public de bloquer les gens comme ca.

no need to remove the brew handle

no need to remove the brew handle

Ideal has a newer version of the In-Sure lever connectors. They're bigger (22-10 AWG), have a higher current rating, have the levers on the port side, and have a clear plastic shell.

Helped a lot thank you

Did you get yours on sale? Black Friday ?

Hey Jim! Praying all is well with you! Great job on another video 🎉

Changing the filter in a Keurig would be another good video. I think a lot of people either forget or don't even know it's there, and they can get incredibly gross if they're never changed. I have a Cuisinart brand brewer that's similar to this (brew a whole pot or a single with a k-cup). You don't really need the filter unless you have particularly bad tasting or hard water which can cause scaling. I just like to refill mine from a Brita filter pitcher to avoid having to deal with filters in the coffee maker at all.

Nice review 👍🏻 As I’m the only coffee drinker in the house this wouldn’t be for me. Cheers🍺🍺

Remember not all of these printers can do that Glitch

if your boards are loose like in your video, couldn't you just spin the pliers around and come at the nail from the other side leaving all the room in the world for your hand? Also, a nail set and a hole in the bench for it to come out will leave you with metal-free wood.

5 years ago..... just bought my ser and is 5x longer in 2024!

This video is WAY better than the instructions that come with the part!!

I had to get a stronger declining acid.. Did the 12 ounces and 12 cups.. Only got about a ounce out of it.. Did the turn on every five for the half hour.. Then let it sit all night. The next morning I got 12 ounces and 12 cups of the acid out.. Rinsed it 5 times on both sides 12 ounces and 12 cups.. The descale sign went out on its own..

breathtaking and wheezy interesting video! Thanks! 😅😅😅

Very Timely. I'm waiting for a tow, and my gear shift is stuck!! Thank you Sir!! 👍

Worked for me too. Thank you. I liked it was simple and didn’t have to listen/watch a length of time before getting to the point