@@davidrickey3776 Found out it's a green wire in the upfitter harness under the dash. "The headlamp flashing module is activated by the application of 12 volts to a dark green wire in the upfitter harness connector labeled 6J3. When activated, the headlamp high beams and the high beam instrument cluster indicator will flash alternately at 3.0 flashes per second. When the flashing module is turned on, the module sends a signal to the BCM which alternately flashes the stop lamps and backup lamps at the same flash rate as the headlamps. Depressing the brake pedal will override the stop lamp flashing and placing the transmission in Reverse will override the backup lamps flashing"
Avoid ! This is trash. Individual in video assumes that the person who is watching & eventually performs this knows how to open the menu. Then he doesn’t show the menu. I rarely comment on ppls efforts to assist others but just because you have an iPhone & know a little about vehicles doesn’t make you an expert. Take more time to walk through every step & DON’T ASSUME your audience knows as much as you. State where to find the controls on the steering column & which menu option to select. Even if it’s repetitive, this will cover all the steps of the process. I’m avoiding any future posts until the explanation process is thought through step by step. Positive criticism.
Once the flasher is installed how do you activate it?
I am wondering same thing
@@davidrickey3776 Found out it's a green wire in the upfitter harness under the dash. "The headlamp flashing module is activated by the application of 12 volts to a dark green wire in the upfitter harness connector labeled 6J3. When activated, the headlamp high beams and the high beam instrument cluster indicator will flash alternately at 3.0 flashes per second. When the flashing module is turned on, the module sends a signal to the BCM which alternately flashes the stop lamps and backup lamps at the same flash rate as the headlamps. Depressing the brake pedal will override the stop lamp flashing and placing the transmission in Reverse will override the backup lamps flashing"
Wow that was bad
What a waste of time lol worst camera guy ever
Facky
HOW TO POINT YOUR CAMERA AT STEERING WHEEL. POOR VIDEO 💩
Programming mode isn’t available. GM forcing owners to spend more at the dealership for something so simple.
How did you put it in programming mode?
Don't quit your day job. Your video and narration skills leave much to be imagined
Worthless tutorial
2 yrs later...still waiting on how to get to programming mode..
you suck! Do another vehicle dude. How do we get into program mode>?! Duche bag.
What’s the point
Horrible Tutorial might as well delete this video
Where are all those keys?? I thought there was only two
Not worth a shit video, Couldn't see a thing when it came to programming key fob
Through out the entire video all we saw was a guy pressing button on a steering wheel
Horrible video... you didn’t show how to get to options/programming
Avoid ! This is trash. Individual in video assumes that the person who is watching & eventually performs this knows how to open the menu. Then he doesn’t show the menu. I rarely comment on ppls efforts to assist others but just because you have an iPhone & know a little about vehicles doesn’t make you an expert. Take more time to walk through every step & DON’T ASSUME your audience knows as much as you. State where to find the controls on the steering column & which menu option to select. Even if it’s repetitive, this will cover all the steps of the process. I’m avoiding any future posts until the explanation process is thought through step by step. Positive criticism.
how did you get it into program mode for replacing a key fob?????
Terrible video man you didn't show what you doing
Terrible video...
how do you get to the program mode
i didnt have no luck on remotes, cain't see what buttons he is pushing
Lock/unlock at the same time
That be nice if u give more info on remotes
How do you get it into program mode?