Відео

這台車沒有支援哦

現在的已經改掉了

我們目前沒有對應 Focus ST的外掛電腦，如果有興趣進一步了解的話可以加入官方LINE。 line.me/R/ti/p/@hdi5145v

利用外掛電腦介入，可以釋放原車潛能，讓渦輪車更早起壓、扭力馬力小幅度提升，讓原廠輸出曲線更線性並且高原化。

@ 價格呢？

@@余宗哲 一萬四不含工資，有需要的話可以加我們官方LINE詢問 line.me/R/ti/p/@hdi5145v

You will need an additional 1-to-2 splitter cable, as well as an Exhaust Valve Decode Module that plugs into the original valve connector to prevent the ECU from triggering a fault light. Where did you purchase it?

@@shadowmeterz i thaugt it was more than the splitter cable to run the pair from one side of oem harness. I have the valves removed before and know its triggers the dash warning. The cable i at this state not need, have one made myself but i need the box to put on passager side cable

You will need an additional 1-to-2 splitter cable, as well as an Exhaust Valve Decode Module that plugs into the original valve connector to prevent the ECU from triggering a fault light. Where did you purchase it?

@@shadowmeterz is it the same modul to Mercedes as for vw, cant find any to vw. Can i buy one from you directly?

@@patrikaberg2361 Yes, it's the same, please send message to our instagram(@shadowmeter) or facebook further, thank you!

More information www.shadowmotor.com.tw/en/product/r-commander+2-rpm-activated-switch-controller.html

This device can be used for many functions. It can be connected to a shift light, a solenoid valve, and even used as a tachometer.

This device has many applications, it all depends on how the user applies it.

This device can be used for many functions. It can be connected to a shift light, a solenoid valve, and even used as a tachometer.

If you have set ACC, it is possible that the ECU of W176 interrupts CAN communication for a long time. Please turn off the engine and lock it, and confirm again after 5 to 10 minutes.

Yes, it can be used on this car, and it can usually display basic information

Yes, D-Meter2 will turn on and off according to the vehicle ECU. Of course, if you decide to park the vehicle for a long time, you can also unplug it.

出廠設定都是右上進入，你有更改過左右駕的設定嗎?

可以私訊小編了解哦 line.me/R/ti/p/@hdi5145v

D-Meter2 has preset startup and shutdown modes based on voltage. If the vehicle's voltage cannot allow the system to turn on and off normally, you can manually set the voltage and even set the RPM as the basis for shutdown.

What is RPM?

You can set the startup and shutdown voltage values. If the shutdown voltage value is set to the lowest, it will shut down according to RPM.

The speed source displayed by D-Meter2 is through the vehicle ECU, so it will be an accurate speed and does not need to be calibrated.

立竿見影般的效果

哈囉! 有的喔，請問您在哪邊呢? 麻煩私訊或寫email給我們您在哪邊，我們發送資訊給你~ 聯絡信箱: info@autojaw.com, FB: @shadowmeter, IG: @shadowautojaw

會破保嗎

所以才要盡量讓它人性化囉

喜歡此視頻請三連(X 喜歡此影音請按讚(O

顯示時速、電量還有圖示而已，夠用囉!

可以說是相當簡約

特斯拉確實有很多好跟不好的地方

因為安裝在暗處，反而更容易辨識。

Yes it will work on Mazda, 2014+ recommended

保險司盒內，非永久電(ACC)都可以

@@shadowmeterz 車內的保險絲還是車外的

After installing the shadow valve controller, everything is based on the controller mode. Driving modes such as sport or comfort will not affect the valve switch.

When the engine of most cars is started, the intake manifold has a negative value, not zero. What kind of vehicle is yours?

Hi! Thank you for your message, actually we tried to contact you via Amazon but couldn't. Normally, the boost value is available under channel boost 1. It seems that your car system may be a bit different. Here is the solution, please change your boost setting to boost 2 or boost 1+2 and try if there is boost pressure available. Feel free to contact us if got any questions while setting, simply send us DM via FB, IG or email. :)

Hi there! Thank you for your message. To provide which purchasing method is best for you, please send us DM via Facebook, Instagram or email to know more detail.(Please click profile to check all contact details.) Thank you!

您好，因為柴油車沒有負壓。 只能改裝電子排氣閥門 若店家能幫您流用原廠電子閥門馬達(BMW、BENZ、VAG) 就有對應的線組能使用我們的二代電子閥門控制器，

@@shadowmeterz 皮卡因該都沒有這項功能

所以一定原廠要有這項功能嘛？

@@南投馬東石 可以找排氣管店家額外加裝電子閥門，再流用我們控制器

會斷電，有經過暗電流測試沒問題。

我的怎麼按都是11～12.8v沒辦法關機

haha, of course 350 is better, but use the piggyback can effectively increase the horsepower and torque, so that the acceleration response more better

350 is slow, go 500 if you want potency or 300if you want cool sound and gas economy. 350 is both slow and gas hungry.

Yea. Next year actually. I will be adding the is500

品牌有選Volkswagen嗎? 選品牌後就會出現變速箱油溫了

是的，建議取消，不然原廠電磁閥會在1.0bar鎖壓，交給渦控接管即可

yes it can work on BMW 328

Sorry, only clear code function

Sorry, only clear code function

can buy it in our alibaba web www.alibaba.com/product-detail/Plug-and-Play-OBD-II-meter_10000002605621.html?spm=a2700.shop_index.82.6.426b6d9dQTETWY

Vag車系有開通Boost 1+2的功能，若可選擇1 2就能對應到2Bar，但還是要看實車ECU是否提供選擇Boost通道