Відео

Pretty sure is normal , i just tried mine and makes the same noises, i belive its just the release of pressure and the springs behind the jack, I wouldn’t worry about it unless the jack is not holding pressure or not working as it should.

@@MTG6.2 thank you!

I looked it up on their website and it says they do come with it and it shows it on the pictures but am not 100 percent on it,I would probably ask in the store and most the times if your buying something like that they let you open the box to see inside if you ask them.

No, its for the 2.4 ecotec

Yeah that works to or big pair of channel locks,and most of the time for the rear you need a winding kind of tool to screw back in the piston.

Hard to say but I think the belt might be in the grooves other wise the belt would of came off already or it would be pretty chew up by now, you might have a loose pully but hopefully you get it figured out

Try holding the ratchet on a vice and use a prybar to pry the socket out.

@@user-sy5iu9lm7f does not have a function for camshaft position relearn, it does have one for the crankshaft position sensor relearn for the jeep wrangler, patriot ,liberty, but is not free will have to pay like 35 bucks to use this function.

Is it out side or inside the if i flip it up side down can i see it from the bottom ??

@@MTG6.2 yes it’s at least 1 inch wide.

@@MTG6.2 yes you can see it if you flip it over, it is at least one inch wide and opens and closes on a weak spring and leaks like a siv

Okay I’ll take a look today

Mine does not have any plugs in the bottom, the whole bottom is one piece, the only seals that it has are inside but nothing in the outside,on mine if ends up leaking from any where on the bottom then that would mean the plastic bottle is broken and would need a new one.

My guess would be probably not, until it starts doing it all the time like this one on the video i wouldn’t worry about it,

@@MTG6.2shit mines do😂 now ik

I’m having my rpm’s move a lil bit at idle and a hard brake sometimes think my pump is bad I’m sure it is my car kinda sounds like this

@what_up_doe_AL If it is i would replace it asap before it locks up and breaks the camshaft

Thats a pretty good amount of miles, my guess would be the gasket just got old and brittle, gaskets get brittle and loose they elasticity over time after heating up and cooling down alot.

Yeah thats what i been seen that most people have alot of trouble with it, and your right if the voltage is to low i wont charge usually what i do is use the jump start feature like twice then it would start chargthe battery, the one i have i left it out in the rain for like a week i just forgot i left it out side and am pretty surprised that still works just fine just the chrome handles are rusty looking but it still works just fine.

@@MTG6.2 I use a cart with older batteries to parallel charge the severely depleted batteries. Once the smart charger detect voltage is reached I'll put it into reconditioning mode. Once enough voltage is stabilized in the reconditioned battery I'll trickle charge with very low amps for days if needed. If the best option is to reconstruct the battery then its better to just buy another.

That’s awesome some tool dealers are just the good, some times hard to find, i got a friend that uses this kit thats how i found out about it, from what i heard from him he loves them and uses them avery day for filters and stuff like that, he told me they work great.

Does it have a check engine light on ??

@@MTG6.2no

Pretty good i still use it and in the winter time it sits outside in the snow and dont have any problems with it.

Hopefully you can get a replacement

I think it is normal ,mine clicks when trying to charge and it’s changing the amps and voltage and when it stops charging it usually makes a click

I have used it for smaller seals on transmissions,torque converter seals axle seals and it works just fine as long as you have the right adapters i ended up buying more adapters for it so i could remove different type of seals and for me it has worked just fine so far, am not sure on transmission bushings but if you have the right adapter for it , it could probably work.

Pro tip plus the other one going around wgere u drill a hole above the port for cleaning, and fill it with a screw a nd o ring

Does not have wires they are actually call ignition coils they usually last the life time of the vehicle they don’t really have a maintenance interval for them,they usually start going bad one by one and you just replace them as you go or if you really wanted you could replace them at the same time is up to the owner, just look it up and 1 coil from gm is about 46 dollars and you need 4 plus the spark plugs and at this time the ones in my equinox are working fine so I decided to leave them hope it helps.

@@MTG6.2 i have to replace my coils. After changing the plugs, doing the seafoam treatment to the cylinders and cleaning the carburetor i still have a tiny shake. hopefully replacement of the coils will fix the problem. Thank you so much!

​@@BullProspectingtry cleaning fuel system with lyquid moly complete fuel system cleaner or have a shop remove and clean fuel injectors

EP-6 Torx Plus Socket 83120 EP-7 Torx Plus Socket 83130 EP-8 Torx Plus Socket 83140 EP-10 Torx Plus Socket 83150 EP-11 Torx Plus Socket 83160 EP-12 Torx Plus Socket 83170 EP-14 Torx Plus Socket 83180 EP-16 Torx Plus Socket 83190 EP-18 Torx Plus Socket

Alot of work but hopefully that takes care of the issue,i would also recommend changing your oil more often to prevent that from happening again,i change my oil every 4000 miles due to the fact that they have low tension piston rings and having clean oil helps prevent your engine from burning oil and so far I haven’t had any major problems with mine.

@@MTG6.2 yes ofc I'm keeping track of it from now on its my wife's car she went over 10k miles maybe even more I did do a engine flush at the last oil change but I still see sludge in there so that's why we are going to do all this

Did you figure out how to prevent the problem?

I honestly would not recommend any of those products it may or may not help but some times they can just leave a mess inside the engine especially in newer engines where tolerances are really tight, but it is up to you if you want to use them,i personally would not use any stop leak or any of those products to stop a leak, but if your going to trade it in anyways like i said it may or not stop the leak depending on how bad it is but i wouldn’t think it would harm anything right away i would take some time to actually do any harm i would say.

The service bulletin is pretty old so I doubt they even look for it but yes if they try hard enough they can find it and if the rear main started leaking again in 13 months makes me think they did not removed the intake to clean out the pcv system as stated on The bulletin on the video also the ecm needs to have be up-dated to current calibrations and would recommend changing the oil before winter around november to try and remove any moisture in the oil and to try to prevent it on mine i replaced my oil cap and havent had aproblem with mine and this pass week the wheater its been in the negative numbers. Hope it helps

@@MTG6.2 I'll ask the mechanic to take a look for the bulletin, I'm sure he will be thrilled 🤣. My oil was changed just a few weeks ago.

@@kenledbetter4979 need to clean the pcv orifice in the intake manifold or you will just keep blowing seals they should of known this the first time u took it in its a common issue with the 2.4

@@thomaswalton9089 It was repaired at a GM dealer, they told me they did that so I'm hoping it last a while.

That’s pretty much how i use mine,so far still working just fine with no problems

@@MTG6.2 Reading other people's reviews. I'm hearing the same thing. About two years of use & they're all done. Feel like I threw away $200 plus dollars. I didn't get the extended warranty. ☹

Just to make it stand out from other channels with similar names and keep it different haha, good question

No it does not come with it i would ask your snap on guy if you know one and see if you could get them i tried looking it up on snap on website and couldn’t find anything out if I remember i can ask the snap on guy and see if you can even get those