Відео

I’ve got old iron horse 2 strokes and 2 victa 2 strokes and they can cut taller grass than the 4 strokes because the 2 strokes don’t bog down

😂you saying jandals are ok I do it sometimes in bear feet 🤣 and I do it with out the catcher

What's the advantage of diesel over gasoline when diesels twice as much do not use starting fluid on these little engines the engines are louder not really any more power several videos on UA-cam about diesel engines today small engines everybody go out and buy them one do not use starting fluid on these little engines

Is it mandatory when working with machines in the garage? You should wear sandals.

probably broke because the power stroke its creating a vaccum without the expansion of gases thats supposed to happen with combustion

How much RPM your motor have?

This video is painful to watch

Actually,you need diesel oil don’t be cheap

That red lever is a decompression lever

what a time to jerk off since more than HALF of a total sub (paid and not or not pain value) has at LEAST watched 10 seconds of video!!!!!! home depot worker just fits you more Though.

Where u get that throttle cable?

Super

Not the best choice of bench for that task

The oilfrom a diesel is sooner lack than from apetrol engine that is normal

All you cut was grass?????

I have the same one as u I just have to fix the seat breaks and the wheels and I love to do doughnuts in my driveway I drove mine all the time till the breaks broke and I still drive it till winter and then my wheels all went flat

Liked your video young man. I had recently refurbished a 1983 Yamaha G1 Gulf Cart . I included the F & R transmission since the rear differential doesn't include reverse. Powered by the Predator 420 cc engine. This setup has plenty of takeoff power but does take a few seconds to get up to full RPM. At that rate i measured around 42 mph. Handles well at this speed on a straight away. It steer's more like a car than a gocart since it has a steering gearbox and tie rod ends. Although its got all new brakes. Tires, engine, shocks and springs i don't feel really safe running at 40+ mph. Anything could fail causing a serious accident. Besides, Gulf Carts were never designed to travel much more than 15 to 20 mph tops.

Gr8 test young man! Cant wait till you start flying yourself around the yard!!! Lol Love the Prayer!1😇🙏👍

Hello, thank you for making this video... All the other ones I could find were in Russian or other languages that look like various versions of kaopectate spellings

Go Squishy!! Get your exercise!! 😊😝

You need bigger rear tires

I reckon that sound is rod knock, at least from what I hear early in the video

What do you guys think of the name Baby Blue, my brother hates it :) lol. I would also love to hear your suggestions on a name for this little ATV.

Well this thing is cool although its a little bit sad for the engine because i thing the engine has a way bigger potential than only running an air compressor since diesel are made for long time usage but its a nice project and good work! 👍

Awesome! Just like me when i was your age! You have a new subscriber! Keep going!

It uses the same engine as the famous Honda Dax 70 motorcycle. 1969-1999 6.0hp-9,000 rpm. It would be interesting to change the piston rings. There are many spare parts for this engine. 

Important note: I realized after posting this video that the starter button actually does work I just had to depress the break while hitting it... Silly mistake on my part.

Crimping the connector: on top of the tool are 3 slots with a colour dot equaling the sleeve colour. The solonoid needs 4 connections. The 2 twelve gauge make contact to suply current to the starter motor. But you need a + and - to make it operate(steering current). - might be the unit bolted to the frame and - batterie bolted to the frame or a wire. + comes from the starterbutton. Flywheel with magnets and coils give electricity. When a magnet passes a coil it generates current. Gen 1(coil1) is feeding the ignition system. Gen 2 (coil 2) is charging the batterie. When you have a batterie it should read aprox 12 v with a non running engine and 13/14 v running. It might already be burn. Please make a second on how it goes further.

Do you think someone thats 6ft could fit in one of thoses?

Someone was working Very hard to help you make this video! 😇🙏👍

Label says. Diesel fuel only. Can't fill other than Diesel.

This is the kind of stuff i live for lol.

I was doing some further testing with this after the making of this video, and the nut that holds the propeller on came loose, even though I just tightened it. So I replace the nut with a nyloc nut.

You should of stood on it 😂😅

Rudolf diesel not invented product as a junk, just about quality maintenance of engine user is junk.

cut off the cooling fins from the flywheel, they just make un nessesary drag and the coolin from the prop will be more then enough, maybe even cut off some of the cooling fins from the cylinder for waight reduction becuse of the better cooling from the large prop

At 7:03 I calculated I was revving that little two-stroke to over 12,000 RPM!!

When you said "bru..." to Anthony. 😂😂

Im actually looking to get an old yazzo brush and field mower and upgrade the engine to something with a little more torque... Only problem is would a pully with a 5/8 bore fit the 20 mm shaft

You save my day bro same problem in my brush mower thanks 🙏

̶W̶i̶t̶h̶ ̶d̶i̶e̶s̶e̶l̶,̶P̶l̶e̶a̶s̶e̶ , Please change to " With (Use) pure diesel,Please " The explanation below is Please use pure diesel, Biodiesel and other types of diesel cannot be used!😓😓😓

Thank you,

I did this many years ago for crazy thick grass in the backyard. Works like a charm. I had to weld a brace across the front though. The wheels start to camber after a while. Also i left the big wheels on the back like normal.

This is honestly one of the best vids on all of UA-cam! This is a hardcore rebuild, very impressed with your work and you came out with a pristine and awesome machine at the end of it :)

Always check the intake boots on those. The 4 bolts loosen and they run lean. Sometimes the carb will have a slight wiggle. Seen two recently with the same issue.

Hi there Good job have good day be safe.

The all come with a hole in the crate, mine was not even bolted down.

I don't know why and I don't know what I would do with it but I WANT ONE!! (Heh)

Great video, but just a bit of advice: Never start these on concrete. You'll run the risk of cracking the block.

Swap the wheels over leave it low at the frunt when you get high grass the big wheels on the back will help to leaver it over the tall grass when you push down on handle