- 6
- 123 165
Scott’s ( plaster works)
Приєднався 22 чер 2021
Відео
(EIFS) finish coat
Переглядів 27 тис.3 роки тому
(EIFS) how to sand foam
Переглядів 4,6 тис.3 роки тому
(EIFS) base coat and mesh pt 2
Переглядів 11 тис.3 роки тому
(EIFS) base coat and mesh
Переглядів 52 тис.3 роки тому
(EIFS) foam application
Переглядів 27 тис.3 роки тому
Verry nice
What kind of the mesh you used
I hope ya got a partner to help run finish on that!!!
Why not butter each sheet?? At least Thor has the grooves correctly for water management...and i see a water membrane has been applied to the substrate....can you get a bigger hawk???? Lol
Soy plaster en yuma y trabajas muy bien
Where do you buy repair materials? They build many strip malls with this and cover the columns in Texas and cars are always bumping and crushing the styrofoam
I would replace the foam on the columns with brick or stone about 3 feet up so it doesn’t get damaged as easily and it would look better but you would have to call a local stucco contractor they know where to get the material and they need to know how to match the color of the finish that is very important and thanks for watching the video
In Texas the EIFS is a layer of styrofoam glued to plywood. Then fiberglass mesh and then Dryvit granular paint. We need to repair the dents and crushed areas and corners. Not to completely change the architecture of the entire strip mall.
I understand it’s just a poor design and it’s always going to be a maintenance issue with the EIFS and I hope you can find someone in Texas that will be able to fix your columns they are so many shady contractors out there
Hey Scptt I have a house in Pennsylvania would you have time?
Thanks for asking but I don’t have the time for anything else my plate is full
Hey Scott, is a safe to assume this finish coat is the plaster & color in one go? Great work 👍🏼
it's faster to have one guy mud the styrofoam and another to set it that way is to slow
This guy has skills in troweling and knowledge of his job, all while standing on a 2 X 12” board on 5 gallon buckets! Give him a raise! He’s a one man machine!!! Thank you kindly for videoing his skills.
IT's better to put the glue on th foam board
I was a plasterer 20 years ago. Anytime I’m having a bad day at my current office job I’ll pull this up to remind me lol. God ceilings hahahaha nice work man!
Good to know if you get bored with the office and need some cardio workout let me know got plenty of work and got to love ceiling work
@@scottsplasterworks6971😂 I’ll pass I don’t miss it. But you’re killing it!
Beautiful job bro!
Must be cool out there in that area. Here in southwest New Mexico in the summer you have to have a floater right behind you or it dries
Yes it dries up pretty quick here too that’s why I sprayed the water on the wall first if you watch the video you will see I spray it once so it starts soaking in then I went back over it now the wall won’t suck the moisture out of the finish as fast also I ran the finish heavy so the sun can’t dry it out when I get all my finish on then I can go back and pull it tight and float if you look at my shadow I was in direct sunlight it’s all about the timing thanks for watching
That wind doesn’t help either
A man that needs not to make a slick production of pop music and mindless redundant chatter.
Very informative video. Not one word said. Thank you!
Thanks UA-cam im I learn from this videos so I don’t pay for it I make my own thanks from this asome videos I did my
Keep posting brother .true craftsmanship
Thanks for showing us how not to do it. Mud the foam
Wrong!
What brand of base coat
I've been doing this kind of work for 25 years and to me it's not the best way to do it but every body do it different
I’ve also done this work for over 25 years and have done it the same way as you and everyone else I had just done a job right before this one where I had to stick 4’x8’x2” sheets on the wall and that’s how it was done I done this one just to see how the 2’x4’ sheets would work I figured I would show something different sorry if everyone has a problem with it
Why don’t they use mud stands and mud boards
I would if I was doing stucco but I’m doing EIFS don’t need them plus I’m on a new roof and don’t want to make a mess
I still come back to this to refresh my memory. This applicator is smooth with it. Spends no more than 10 minutes per panel. Good job my friend. Would be nice to see more videos
Para que hace un vídeo si está todo el rato callado
u missed a tiny spot😂❤
Scott nice work!!! do you work with STO products?
No I use Dryvit
Trabalho Aqui no Brasil a 29 anos com revestimento Milimétrico direto parede de concreto e bloco concreto nao utilizo reboco massa niveladora + acabamento na cor total 3,5 mm totalmente hidrorrepelente os dois materiais nao vejo nada de novo neste material.
I just slap the mud right on the piece of foam
Scott, Would you post vid on expansion/V-Notch joint installation?
G'Morning, Scott. Interested in doing ICF job on Guam? Travel and lodging included. Project is 4 story ICF Superstructure with 3250 sq' of surface area. Need Control Joints and Base Coat. Acrylic Fine Finish is desired.
I have jobs going on now and a few waiting to start the offer sounds good would like to talk more about it let me know how to get in touch with you thanks
I want to learn how to do this..
Don’t bother watching this then
Great job, keep posting videos. Very helpful..
I’m interested to work?
How long have you plastered and where are you located now
You're an amazing craftsman. Thank you for sharing these videos!!!!
Glad you like them!
How much does eifs usually cost per sq foot?
Flat walls with out windows I think it should be around $8 to$10 sqft
@@scottsplasterworks6971thank you man I appreciate it, is that with the sand pebble finish or without? looking to do this to my house but unsure if I’m getting a good price
EIFS Stucco 101: A Beginner's Guide to this Innovative Building Technique ua-cam.com/video/fOZNTHndb5Y/v-deo.html
That looks perfect,great job, ehere do you buy the stucco? Brand and store to get it
Everything you need to know is on the back of my blue shirt
Good job thank you my friend for your video 👍👍👍👍
Thank you too
Great work, what is the final finished look?
I have a video of the finish coat check it out
Bien raspado que se quiten esas pansas
Working with plaster is a true art form.
It's not plaster
Hola soy Ivan , soy plaster estoy buscando trabajo voy q cualquier parte de Estados Unidos soy legal para trabajar. Hi mi name is ivan ,I'm lookinfor a job I'm a plaster I'm legal for work ,I can go any where .
puedes mostrar como hiciste las bruñas (las lineas que estan formando cuadros)
Eso se hace con una máquina especial, algunos les llaman Joins o Review y se le hacen al Foam
Thank You so much!
Hey Scott! Did you make that trowel yourself?
Yes I cut off 3/4 to nothing on all my new trowels and round the corner of the nose that works for me but I don’t know how it would work for anybody else thanks for noticing
For a crack in a square stucco post (on the corner seam), would you recommend repairing with Fiberglass mesh base coat or elastometric sealant?
What kind of material are you spreading that onto? Is it some kind of foam board?
Nice work
Great video with bonus ASMR. 😴
ASMR ?