Відео

How to Replace BMW E30 Rear Sway Bar End Links

Forgot to put it into sport mode but xdrive and the snow tires work well

Short acceleration video for the intake adapter 2015 - 2020 www.ebay.com/itm/185731330848?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=s-ptBSS3S22&sssrc=2349624&ssuid=s-ptBSS3S22&var=&widget_ver=artemis&media=COPY

quick clip before I install the cat. this setup is a little loud for daily driving in my opinion. the resonators clean up some rasp but but it's still too loud. sounds pretty mean otherwise

Replacing the heater core on my 1990 325i. From what I have seen this applies to all late model airbag cars. It may still apply to early model cars as well with some extra involved.

Not sure the actual name but HVAC Heater Blower Motor Temperature Control Climate Sensor replacement

E30 Replacing Fog Light Lenses

Another video on replacing the csb and flex disc on a bmw e30. This one I did end up installing the csb backwards! Make sure you note which way yours is mounted before removing. This must be installed correctly because the center support bearing is offset and if installed backwards can cause binding and premature wear in the driveshaft and guibo. The Open end should be facing the back of the ca...

Quick video on how to replace the oil pan gasket on your bmw e30. This is the first time I replaced one of these so there may be a few small things I left out or didn't explain. I only found 1 or 2 videos where the oil pump was left in place so figured this one would be useful. Add this video to your list if you plan on doing this job yourself.

I couldn't find very many videos on this so here's a quick one. This works for airbag or non airbag steering wheels. This car has 6 button obc.

Chemical Guys yellow cutting pad and Meguiar's Ultimate polish on a generic polishing foam pad. 2000 and 2500 grit sand paper with a dura block to level the clear coat. There are many videos that explain how to do this so take this one with a grain of salt. All paint is different but these techniques will work for most modern cars.

rebuilt engine with valve clearance adjusted to .010" or .254mm m20b25 with new oem cam and valve job with new seals

I tried to make this video short but that didn't turn out. 7mm allen for the caliper bolts, 17mm for caliper bracket bolts, 5mm for rotor set screw Not a mechanic by any means so do this at your own risk.

Going from a 325i to 325is lip makes a huge difference in the front end on the e30. The install is very straight forward, new clips are recommended but you should be able to use the old ones if they are still in place. This lip is from Ikon Motorsports.

New Wheels for the E30

BMW E30 Magnaflow muffler 14815 long tube headers exhaust cold start

How to Replace Front Shocks And Springs on an E30

How to Replace Faded Rear Deck Material on the E30

E30 Replacing Fuel Pump, Intake Boot, and Injectors

Starting Another E30 Project

2008 BMW 335xi E92 Walkaround

N54 335xi Mhd Stage 1 v7 Short Pulls

Jeep 4.0 Piston Slap

E92 Front Seat Won't Fold Forward FIX!

Bmw 335i N54 E92 Cold Start

1999 Jeep Cherokee cold start muffler delete

Solar Eclipse over Lincoln, NE 1pm

Dinan BMW E46 330ci Feature

7 second Rx7 fb 88mm turbo