- 175
- 249 758
SolidMakers
United States
Приєднався 5 кві 2013
My name is Danny Luna, I'm the owner of Solid Makers Aluminum Structures inc. , a construction company located in Clewiston, Florida. I've been doing construction for 20 plus years. I learned the trade from my dad.
In this channel I'll take you into my world of building, mainly building aluminum structures, re-screening pool screen enclosures, construction and concrete, basically my life as a contractor here in Florida. enjoy the screen room porch patio videos.
Basically I build Aluminum Screen Porches, Carports, Screen Enclosures, and install Seamless Gutters & Hurricane storm panels.
We service Fort Myers, Cape Coral, Alva, Clewiston, Labelle, Belle Glade, Loxahatchee, The Acreage, Wellington, & Royal Palm Beach Florida.
Call Us: 239-370-8055
solidmakersaluminum.com
solidmakersaluminum
#screenporch #poolrescreen #screenrepair #screenroom
In this channel I'll take you into my world of building, mainly building aluminum structures, re-screening pool screen enclosures, construction and concrete, basically my life as a contractor here in Florida. enjoy the screen room porch patio videos.
Basically I build Aluminum Screen Porches, Carports, Screen Enclosures, and install Seamless Gutters & Hurricane storm panels.
We service Fort Myers, Cape Coral, Alva, Clewiston, Labelle, Belle Glade, Loxahatchee, The Acreage, Wellington, & Royal Palm Beach Florida.
Call Us: 239-370-8055
solidmakersaluminum.com
solidmakersaluminum
#screenporch #poolrescreen #screenrepair #screenroom
Hurricane Milton Strikes Florida, Equipment breaks down while Building a Screen Patio and concrete!
Hurricane Milton decides to make landfall on Florida, in the middle of a screen patio build. Nerves where on high alert before, during and after this storm. Renato breaks some important equipment. Just another adventure pouring concrete and building a screened in patio in Clewiston, Florida.
We service Clewiston, Labelle, Belle Glade, Loxahatchee, Wellington, & Royal Palm Beach Florida.
solidmakersaluminum.com/
We service Clewiston, Labelle, Belle Glade, Loxahatchee, Wellington, & Royal Palm Beach Florida.
solidmakersaluminum.com/
Переглядів: 110
Відео
Brace for Impact: Protecting My Job Site from Hurricane Milton!
Переглядів 4014 днів тому
Staying busy preparing for hurricane Milton. Trying to protect my current screen patio I'm building. solidmakersaluminum.com/
Step-by-Step Guide to Building an Aluminum Screen Porch Like a Pro!
Переглядів 74721 день тому
Watch the whole process start to finish "How to build a Screen Porch". We built this screen porch in Moore Haven, Florida. We ran into some minor issues , but found a way to get the job done. solidmakersaluminum.com/
WILL IT FIT? We Built an Aluminum Carport for Boat with T-Top!
Переглядів 401Місяць тому
Goodbye Old Carport! 🛠️ Watch Us build a new Stunning Freestanding Aluminum Carport for Boat with T-Top! solidmakersaluminum.com/
Behind the Build Vlog: Screening in a Patio Lanai While Surviving the Florida Heat! #screenporch
Переглядів 150Місяць тому
Todays project was to screen in a Porch Patio Lanai. I had to get creative on this screen install because the porch had wood railings, and the customer didn't want to remove them. solidmakersaluminum.com/ #screenenclosure #screenporch #screenpatio
Screen Enclosure Re-screen Showdown: Who's the best?
Переглядів 177Місяць тому
Screen Enclosure Re-screen Showdown: Who's the best?
Ultimate Screen Patio Transformation: How to Build a Screen Porch with Posts Embedded in Concrete!
Переглядів 187Місяць тому
Ultimate Screen Patio Transformation: How to Build a Screen Porch with Posts Embedded in Concrete!
🤑 What construction workers do: Aluminum Specialty Contractor perspective #screenporch
Переглядів 1392 місяці тому
🤑 What construction workers do: Aluminum Specialty Contractor perspective #screenporch
Building a custom aluminum wall door #screenporch #screenenclosure #construction
Переглядів 8642 місяці тому
Building a custom aluminum wall door #screenporch #screenenclosure #construction
How We Build a Screen Room or Screen Porch Patio using Aluminum #construction #constructionlife
Переглядів 1,6 тис.2 місяці тому
How We Build a Screen Room or Screen Porch Patio using Aluminum #construction #constructionlife
How to install Vinyl Siding and replace T1-11 with plywood #construction #florida
Переглядів 7732 місяці тому
How to install Vinyl Siding and replace T1-11 with plywood #construction #florida
How to Screen in a Patio Lanai using Aluminum in Florida
Переглядів 4183 місяці тому
How to Screen in a Patio Lanai using Aluminum in Florida
3 Jobs, One Day: Pool re-screen & hurricane storm panels "Taking care of business"
Переглядів 1833 місяці тому
3 Jobs, One Day: Pool re-screen & hurricane storm panels "Taking care of business"
Step-by-Step: Creating Seamless Gutters with Our Gutter Machine - Installation Tips & Tricks!
Переглядів 953 місяці тому
Step-by-Step: Creating Seamless Gutters with Our Gutter Machine - Installation Tips & Tricks!
Another day, another adventure with the guys at work re-screen & adding screen doors to porch.
Переглядів 1593 місяці тому
Another day, another adventure with the guys at work re-screen & adding screen doors to porch.
Repairing a Screen Enclosure in Clewiston Pool Cage Rehab #construction #vlog #patioconstruction
Переглядів 1384 місяці тому
Repairing a Screen Enclosure in Clewiston Pool Cage Rehab #construction #vlog #patioconstruction
Aluminum Screen Room for Sunrise Restaurant in Clewiston, Florida - How to build a screen room.
Переглядів 5115 місяців тому
Aluminum Screen Room for Sunrise Restaurant in Clewiston, Florida - How to build a screen room.
How to Build a Pool Enclosure or Pool Cage in Florida, the professional way.
Переглядів 7 тис.Рік тому
How to Build a Pool Enclosure or Pool Cage in Florida, the professional way.
Rescreening Pool Cages and Lanais in Fort Myers, Wellington & Loxahatchee Florida - Rescreen Company
Переглядів 648Рік тому
Rescreening Pool Cages and Lanais in Fort Myers, Wellington & Loxahatchee Florida - Rescreen Company
SCREEND-IN LANAI IN CLEWISTON, FLORIDA | In Montura screening in a lanai.
Переглядів 2,5 тис.Рік тому
SCREEND-IN LANAI IN CLEWISTON, FLORIDA | In Montura screening in a lanai.
Repairing & Rescreening a pool lanai enclosure in Fort Myers Florida | GOOD TIMES WITH THE CREW!
Переглядів 4,8 тис.Рік тому
Repairing & Rescreening a pool lanai enclosure in Fort Myers Florida | GOOD TIMES WITH THE CREW!
Pool Lanai re-screen and repair company -Solid Makers Aluminum (Promo video)
Переглядів 118Рік тому
Pool Lanai re-screen and repair company -Solid Makers Aluminum (Promo video)
Screened-in Lanai Enclosure we did in Alva, Florida
Переглядів 359Рік тому
Screened-in Lanai Enclosure we did in Alva, Florida
In Lehigh Acres re-screening a pool enclosure - This was a BIG one!
Переглядів 810Рік тому
In Lehigh Acres re-screening a pool enclosure - This was a BIG one!
Rescreening & repairing Pool Enclosures is what we do - The crew was tired! Working in Fort Myers
Переглядів 543Рік тому
Rescreening & repairing Pool Enclosures is what we do - The crew was tired! Working in Fort Myers
Replacing Pool Cage Screws with Nylo-Tek Screws- We replaced alot of screws in Fort Myers!
Переглядів 2,6 тис.Рік тому
Replacing Pool Cage Screws with Nylo-Tek Screws- We replaced alot of screws in Fort Myers!
Another Pool Cage Rescreen in Fort Myers, on the job, working HARD!
Переглядів 118Рік тому
Another Pool Cage Rescreen in Fort Myers, on the job, working HARD!
Tearing Down an Aluminum Porch & Cleaning up a Mountain of Screen from Pool Enclosures we rescreened
Переглядів 444Рік тому
Tearing Down an Aluminum Porch & Cleaning up a Mountain of Screen from Pool Enclosures we rescreened
How to make an Aluminum Screen Wall Door - We made a Huge Aluminum Door
Переглядів 565Рік тому
How to make an Aluminum Screen Wall Door - We made a Huge Aluminum Door
Re-screening and repairing a Pool Enclosure in Fort Myers | "I hung a door & repaired a wall"
Переглядів 158Рік тому
Re-screening and repairing a Pool Enclosure in Fort Myers | "I hung a door & repaired a wall"
How do I know what size/thickness spline to use on the lanai screens?
If your looking for a video to get tips on building a pool enclosure keep on scrolling this aint it. Not really sure what the point of it even is
Nice project! How did you seal/flash between the beam and the siding?
we removed the siding, then bent a piece of 16" coil for the flashing, I bent it about 5 inches, nailed it against the wall, then peal sealed, then covered it back up with weather proof paper, and siding.
U ain't doing shit bud
Stay safe Danny
thanks! will do
Imagine how small you gotta be to call every one insults ohh your the old guy your the small guy yeah and your the bxtch 😅😅😂😂
How much for something like this? I have a smaller entry and I got a quote for 800. 😓
that sounds like a good price, I'd get it done if I was you.
Very good how to.
I'm glad I could help, thanks for the comment!
Like what you are doing!!
Thanks, Im trying! Likewise I like what you guys are doing out on the west coast of Florida.
What state is this ?
we're in Florida
Keep up the good work brother !
Thanks, I appreciate that!
This is shit weusually do the day before lol. Ya'll let the sun come up before the trucks even left
Mhmmmm just putting rubber between the gaps to hold the screen in place how can you possibly mess it up.
mhmmmm you'd be surprised 😀
Do the doors come made or do you cut them to size too
I order pre-hung doors, they come made.
That's a tough panel to do.
took a lil time, but we got it!
Awesome videos! Any advice on how to obtain the angles to cut roof angles
You can use the Pythagorean Theorem, there/ a good video here: ua-cam.com/video/96irEwpYZsE/v-deo.html. , or you can do like I do, and draw it out on the concrete, we have a nice size slab at the shop, I mark the length from house or end of super gutter to outside of enclosure, then divide that length, then I find my first perlins on each side, then shoot a chalkline making my angle. I'll try to do a video explaining my process.
That's a tough panel to do.
What size metal do you use for your exterior wall post? 2x3?
for this job 2x3, but it depends on the job, sometimes I use 3x3 post , others I use 4x4 post
@@solidmakersaluminumhow big was this enclosure?
@@kohlshafer1072 If I remember right, it was about 30 plus feet.
well I got to admit from one screen room person to another you guys to have damn good job I have a business St cloud for Florida the 35 years building screen rooms used to work in Florida keys so Miami-Dade permitting is no big deal anyway good job guys
Thanks, that means alot coming from someone with 35 years of experience, thanks for watching!
How much for one just like that?
It depends on size, type of screen they want, kickplate size, how many doors, location, and even the time of year, I don't like to give prices like that, because evey job is different and prices go up and down depending on those factors, even for this job, the price is will be different year to year.
💯
Racist post, why is youtube sharing this?????
How is this racist, If I'm mexican and I posted it, the title is true, we are some hard working mexicans, doing what we do most mornings, working hard!
Nice work buddy. Those screened in Lenais look really popular in Florida.
Yea, there a must have if you want to enjoy the outdoors, theres alot of mosquitos out here. What part of the country are you located?
@@solidmakersaluminum I actually live near Pittsburgh PA.
@@joeshmoe8912 Whats the weather like up there at the moment
The past month has been over 90. But right now raining and has cooled down to upper 70s to mid 80s. We get a lot of rain here, not as much as Florida, but a lot for being an inland city.
That's what those clamps are for they come with
I threw those clamps away longtime ago.
By using simple percentages that Aussie girl had sex with 3.74 dudes with herpes
Do you mind sharing what kind of saw/blade do tou use to cut this?
I use a 12" 96-Teeth Circular Saw Blade for cutting Aluminum, you can pick them up at Homedepot.
great video. great team ! You all know how to get it done.
Thanks, I appreciate that!!
Do you go to broward?
not at the moment, but check back with me in 2 months, I might start working that way.
Bad ass! Never seen that before.
I've done a few of these, mainly for fishermen that want to park their boats inside a screen enclosure.
How much $$$???
every job is different but expect anywhere from $10,000 -$20,000 depends on the job, whats needed, type of roof, do have to pour concrete, current prices of material, the prices for material are like stocks, they go up and down.
Guys you should try an electric turkey carver to cut insulation 👍 just saw it in the last video 😂
Looks dope man! Solid job.
Thanks for the kind words, I appreciate that!!!
That's inspiring, ill just add this, failure is to be taken as a learning opportunity, Work hard but also work smarter. this next part is to be taken with a grain of salt, assimilate/copy what works for what big/successful companies do in terms of what they use and how they use something. example: that tool might be expensive but if it saves you time and the final outcome/product is better, then its worth it... awesome energy btw bro!
Respect, Even when you fail, you win, you win because you learn! TRUE!
He needs the coke and honey bun.
score 1 for the old guys with the rebar trick
we've been using that trick forever, thats how I was taught.
Looks great!! Man it's been hot.
Yes the heat has been super hot!!
im more curious where to get this structure to even put the screen onto.
you can buy the metals at home depot, I get mine from a wholesale distributer because I'm a licensed contractor.
Salute!🫡 RAZA WORKING HARD AS USUAL!
Yes sir, Thanks. We appreciate that!
Thank you .
Looks great. 20/20 screen is the way to go.
yes they, get alot of no-see-ums , so the 20/20 should help alot!
Not a fan of angled fascia. Never understood the point of it.Nice rain diverters. Always looks better with the corners cut. Huge upgrade to that home. Great job.
Thanks!
Un calor extremo debe de hacer adentro de esa terraza todo negro 😂 y con el metal de 36" de alto, está bueno como un sauna
Wow that’s nice, I have lived here for 35 years and getting ready to replace the screen for the third time.
third time in 35 years is pretty good, I usually recommend every 5-10 years because this Florida heat is brutal on the screen
DeWalt all the way!!
I prefer dewalt mysef also.
Solid
"Double pay Saturday? dang! Alright, look, I need half of you to go home. In fact, call back at 9:30. I may need you for half a day after we see how these guys work. The rest of you, some good and some bad news: your'e getting double pay, but I'm gonna need you to move at twice the usual speed.. Do a good job and you can go home early! Maybe by ten.." Seriously, this is a good video presentation because you're showing what you're doing almost step by step. A fully step by step video has way too many feet in it though.
I know from experience. Both times were in the morning with wet shoes. I used to work for CRA Aluminium in Ft Myers. Got out before I got to hurt or killed.
OUCH, walking the beams is extremely dangerous
Nice job. They must be Mexicans cuz islanders won’t work that quick
I like the scaffolding. It's a lot safer than climbing the cage.
yes sir alot safer!, I've heard horror stories about guys that fell from walking the beams.
Some good looking work great place to grow some plants if you know what I mean
Thanks, and yes the knee walls surrounding the pool gives you penty of privacy.
@@solidmakersaluminum hahaha nice 🪴
Nylos suck bro