- 40
- 66 372
Bruce Piggott
Приєднався 9 лип 2006
I think your very nice
A long time ago in 1975 I met a beautiful lady called Gaynor Helen Albon.
I thought this is serious, but I didn't want to frighten her away,
So, I wrote a gentle song with no pressure.
Well 47 years later we are still together with two children, so this is the most successful song I have ever written.
Love you Gaynor. X
I thought this is serious, but I didn't want to frighten her away,
So, I wrote a gentle song with no pressure.
Well 47 years later we are still together with two children, so this is the most successful song I have ever written.
Love you Gaynor. X
Переглядів: 267
Відео
Welsh Rarebit cooked in a toaster
Переглядів 732 роки тому
Do not try to do this. This video is for amusement only. Using an electrical appliance in a non-standard way could be dangerous
Crash composite
Переглядів 2842 роки тому
As a disabled person I bought a mobility vehicle from Velobike.UK. It developed a dangerous fault as it propelled me out of control into a stationary car. They are in denial and won't compensate me for the damage to the owner of the car that is hit. Nor will they take it back and return its cost unless I pay them £250 to collect it! In the video you will see that I was inching it carefully onto...
Crash composite
Переглядів 7833 роки тому
As a disabled person I bought a mobility vehicle from Velobike.UK. It developed a dangerous fault as it propelled me out of control into a stationary car. They are in denial and won't compensate me for the damage to the owner of the car that is hit. Nor will they take it back and return its cost unless I pay them £250 to collect it! In the video you will see that I was inching it carefully onto...
So long
Переглядів 2174 роки тому
Made with the Stevenage Cine Club around 1968. Actors: Bruce Piggott (lead and director), Collin Killock, Fred Bonfield, Jill Marsdon, Malcolm Stuart, Paul Briggs, Alice Briggs, Shelvoke Drury, Bob and others not known.
Refugee song 1
Переглядів 684 роки тому
This song came to us out of nowhere and insisted on being written. That is all we can say to justify it. If you like it, perhaps you might support one of the refugee charities that are doing such amazing work, here and abroad. The video is made up of photos from the internet, mostly unattributed. If you were responsible for any of the images we have used, please let us know and we will credit you.
Ambush at Stonycroft
Переглядів 8575 років тому
This spoof western was filmed in Stevenage Hertfordshire around 1965 outside No.5 Stonycroft. Using local children none of which were given any credit, my fault. If anyone recognises any of these children please contact me. Get my contact details by Googling Branor Systems. I would love to give them a copy of the film. Sadly, such a film could not be made now by a 23 year old man living alone a...
lawn race
Переглядів 305 років тому
Spoof video about my wife and next door neighbour wife competing on Olympic Lawn Cutting competition. Great fun.
OldX friends2
Переглядів 1535 років тому
This is a video about many of the regulars at the Old Cross Tavern in Hertford over the last 20 years since the pub opened. Sound track new words to the Beatle song With a little help from my friends.
OldX 20th
Переглядів 725 років тому
This is a video about the 20th anniversary of the Old Cross Tavern in Hertford, Hertfordshire. Made by two regulars using the backing track from Sgt Peppers Hearts Club Band.
Mix1
Переглядів 465 років тому
This is a 3D virtual flyby of a large and unused beer cellar underneath the old McMullen's brewery in Hertford, Hertfordshire. Originally used to store and age beer barrels.
ParliamentSq
Переглядів 545 років тому
This is a virtual flight around the war memorial in Parliament Square in Hertford. Processed from 117 pictures rendered by photogrammetry.
Statue1
Переглядів 465 років тому
There is a statue in Hertford, Hertfordshire of the Rev Samuel Stone made by Henry Tebbutt in 1999. I scanned this in to reproduce it as a 3D model but to my amazement, the scan had captured the entire street. So here is a virtual video of the Wash in Hertford. You will believe a PC can fly!
Photogrammetry scan
Переглядів 4386 років тому
Short demo on the technique of scanning in a human head for the purpose of replicating on a 3D printer via a process known as photogrammetry.
Dehaviland HD Fish Eye Camera Truck ride.mov
Переглядів 3,3 тис.12 років тому
Dehaviland HD Fish Eye Camera Truck ride.mov
THANK YOU, i have been looking how to make lightning for a diorama
Bonjour Monsieur voilà j'ai vu votre vidéo qui est très très intéressante je voudrais savoir si pour alimenter une LED on continue faut-il souder où placer une résistance entre la pile et la LED magnifiquement bien réaliser la petite vidéo continuer comme ça👍
I know this video is many years old but can you tell me where I can buy the red gel to change the colour of the light like on your fireplace please. Many thanks
Useful and interesting presentation. Thank you.
Great song with a smile. Eine Rarität heute. Very seldom.
Bruce, you are a legend in your own lifetime. Stay well. Cx
The way the scooter accelerated is shocking thankfully it didn’t cause a more serious accident.
I have been asked about the resistor that has to be used for different voltages. Assuming a white LED with a forward drop of 3.2 volts and a typical drive of 20 mA values as follows. 5 volts = 90 ohms 9 volts = 290 ohms 12 volts = 470 ohms I hope that helps. Sorry but I don't supply kits anymore. Bruce
Have you given a resistance as you are using 1 led to 9v
So, what am I looking at here? Do you have an end result of what you accomplish?
The sequence of pictures can be fed into a computer and processed by a program called photogrammetry which produces a file that can be fed into a 3D printer and an accurate model of the head can be made. It literally allows you to print people. Look at my website. Search for Branor.
🤣😅🤣🤣
Shocking, company that sold it should be sued???!?!!? What about damage to the vehicle it hit??
Wow hope the insurance will cover this, at least it should. Don't get the idea driving in the direction of someone's stupidly parked car though on such short distance, seems a bit irresponsible thing to do and looks like you just intend to smash this car. No offense tho and hope you are in one piece!
I was inching scooter out slowly so I could turn in the road. I didn't expect it to take off like that. Because the steering wheel lifted off the ground I couldn't even steer! The fault with the engine control electronic is it gets confused with small repeated on/off cycles. I was able to reproduce this later. I even tried to do a wheelie by pushing the throttle hard down. It just pulled away until it reached the maximum speed of 4MPH. Normal operation of the throttle does not allow wheelies only repeated small on/off jabs. In the video you can see that was inching into the road by these short on/off cycles.
@@brucepiggott So, you pretty much say you used the bike not in a 'normal operation' way? Why would you even do that, might have as well ride it while doing a hand stand and then complain you fell off it. As I typed prevoriously tho, glad you are in one piece Bruce, I like your vids and I'm sure your insurance will cover the damages to car and the bike, I personally use a bike from tga myself, and when I rode into a fence, I got insurance to pay for that.
@@tomdriscoll751 The reason I drove like that is because its the only wat for this vehicle to advance slowly. If you try to pull away slowly by just gently pushing the throttle it suddenly lurches away up to 4MPH. In crowded areas or passing through a narrow opening, 4MPH is way to fast. I discovered that I can pull away slowly if I press the throttle on and off in sequence. This worked for me before so I used it when I needed to pull away slowly but this time It caused the control system to suddenly apply full power to the motor. Think about it, it shouldn't even be possible to do a wheelie with a disabled person on board. This is a serious design fault and owners of this vehicle should be warned, not to do what I did. This is a moral responsibility on my part. If you have a class 3 vehicle and you recommend it, please let me know about it because I need to by a replacement.
@@brucepiggott Well, i have a tha one as I said this I think, looks similar tho might be newer model www.tgamobility.co.uk/range/scooters/breeze-s4 but dunno if this will be your price range, I hecked the price on yours, seems to be more down to earth and economy friendly. Frankly, the one I have also is very touch sensitive, got me some time to learn how to operate it. Is more like getting the right feel to squeeze gently. I once asked the guys at tga why it is so sensitive and if they can make it go slower, got info all scooters are like that to not 'burden the use wrist' or something, don't recall perfectly was almost year back. Seems to be the same thing with all scooters tho.
Thanks for that. I am now in the process of suing the company.
Lol at first i would thought this genuine but the guy nearby doesnt even look impressed or distressed he just walks up to the guy like a boss xD nice vid tho, almost got me
I promise you it is genuine. I was demonstrating it to my son who thought I had sped the vehicle myself. It was not until I explained that the vehicle did that by itself that he understood. At the time I was in shock at what the vehicle had done.
@@brucepiggott "speed by itself" as in developed its own mind and did it? Dont those things work like motorsbikes and you turn a handle to accelerate? To me it looks like deliberate acceleration into the car at least on cam. Oh well, still think this vid looks cool just in a meme kind of way, wont be surprised if goes viral
This is amazing! I'm so glad I decided to check up on you up again. I'm actually banging to the At the Atti on a Satti CD after a bit of rum and whatnot. I come back to it every so often because I know it's a particular thing that not many Yankees get, nor deserve. I sent you Volyoom #1, as LintphishX about 20 years ago... I bet you don't even remember... but I still think about you and hope life is great. I have my own little, "Atti" in the horror show of my broken mind! Take care and be good mans!
Ant body that would like to buy the camera that made this video, google 'branor'
Good camera, can i buy this somwhere ? HC Treintje Herman from Belgium.
Yes, from www.branor.co.uk
Very helpful. I subbed. 👍👍🇨🇦
So cool to see
Why not make neon lights as well?
Yes that is possible but neon lights often have sharp bends and that could be a problem with fibre optic cable. But try it anyway.
Yeah I’d say the tiny bends you’d have to do at that scale would kill the effectiveness of the fibers.
thanks,great video.nice and clear,i can now look forward to lighting some of my model ships/aircraft
10 years ago, you were definitely ahead of the masses. 😊👍🏻
quick resume: 4 minutes of a guy taking pictures around the head.
Brilliant tutorial
Whoa...
Nice
Thanks for the video i learned alot
Clear and easy to follow. Thankyou Bruce, this a is really helpful tutorial.
Good one Bruce ...dave
All done for the Lucy Foundation. Donation page: uk.virginmoneygiving.com/BrucePiggott1
Brave man ...nearly had a heart attack watching you jump ..looked a smooth landing ...Dave
Thanks for that. All worth it for worthwhile charity 'Lucy Foundation'
its not sharp picture .....poor quality camera .....auto focus
I agree, this is why I don't sell these. The DC motor in the loco that pushes the truck around causes interference. Also the bandwidth does not allow a high definition picture. This is a test video only.
Very impressive, Bruce! I really hope we can solve the supply issues. I can't wait to see what the N-gauge layout we're building looks like from the cab!
Bruce, this is excellent! I am certain that the interference is not caused by loss of communication, but by solvable power supply issues. Well done!
Good video, gave me some new ideas with the fibre optics that i will have to try out.
Recycled Model Railways
The charity was Macmillans Canter Trust.
Brave man ..that camera past the trial test then Bruce ...
I'm Oscar your grandchild
Looks great Bruce, I'll keep my fingers crossed that a similar N gauge prototype may be in the cards :).
Looks like could be interesting Bruce
Fantastic video!!! Many thanks Bruce. I am in the process of clearing out my loft for the building of a model railway and your video has given me some great ideas on lighting. Really appreciate the help you have given. Very kind regards. John
excelent
Great video very informative,,, well worth using by the looks of that, one bulb could be used to light half a dozen rooms/ windows
This is certainly a great way to see a layout. Your Camtrucks give a great view of what is going on. Thanks to you and the club as well. Regards, Edward Piggott, Dewey, AZ, USA
Amazing!
I now have moved and the N gauge layout is waiting to move up into the loft. Can't make any more N gauge Camtrucks at the moment due to lack of components from China. Cheers, Bruce
Great video buddy, look forward to your next update, cheers Stu @ Lime Junction ( N Gauge )
Very enjoyable trip. Thanks. Love all the track side detail.
I am very lucky to be able to test my Camtrucks on such a fantastic layout. This video has now had over 2000 views! Cheers, Bruce
Absolutely enjoyed the ride. Fantastic scenery and structures.